Titan15 V2

It puts out 2000W with a max peak SPL of 137dB and 131dB continuous at 1 m. That's enough to cover medium venues like DJ gigs, live band sets, church services, and karaoke nights. The 15" woofer reaches down to 37Hz (-10dB), so you get solid low end even without a subwoofer.

The DSP has four EQ presets: Music, Live, Speech, and DJ. Pick the one that matches what you're playing, then fine-tune with the 3-band EQ (bass, mid, treble). A built-in limiter holds back harsh peaks so the sound stays clean when you turn it up.

Press the Bluetooth/TWS button on the back panel until the indicator flashes, then choose "Titan15 V2" in your phone's Bluetooth settings. A tone plays once it's connected. Use the Channel 2 volume knob to set the Bluetooth level against your mics. Bluetooth 5.0 reaches up to 60 ft.

Yes. Press and hold the Bluetooth/TWS button to link two units through TWS (True Wireless Stereo). TWS only carries Bluetooth audio, so a mic plugged into one speaker plays only through that speaker. For mics on both speakers, connect them with a cable from the mix output.

Both channels have XLR/1/4" combo jacks with a mic/line switch, so you can run microphones, keyboards, synths, or a mixer. Channel 2 also has a 3.5mm aux input for phones and media players.

Yes. The XLR mix output sends a pre-DSP signal to additional speakers, a subwoofer, or an amp. Turn on the high-pass filter to send the deepest bass to the sub so the TITAN15 V2 plays cleaner, and use the adjustable delay to keep distant speakers in sync across large rooms.

It has two 35mm pole sockets: the rear one holds the speaker straight up, and the front one tilts it 15° down toward the crowd from a raised stand. You can also lay it on its side as a stage monitor, or fly it overhead from three M8 points using rigging rated for its 48 lb weight.