Rockville
RDF-3
RDF-3
4-Channel Car Amplifier, 100W RMS x 4 at 2Ω, Compact Class D Design, Mounting Hardware Included
Free Shipping
Features
- 100W RMS x 4 at 2Ω for four-channel system output
- Digital Class D design fits space-conscious vehicle installations
- Selectable full-range, low-pass, and high-pass crossover modes
- Power, Status Mode, and Clip LEDs show operating conditions
- Includes mounting screws, Allen keys, and spare fuses
Couldn't load pickup availability
What's Included in the box
- RDF-3 4-Channel Car Amplifier
- Mounting screws
- Allen keys
- Spare fuses
SKU: SKU: RDF-3
View full details









Product Details
Four-Channel Output
Choose Your Crossover Mode
Fits Space-Limited Installs
Monitor the Signal
Installation Essentials Included
Features
-
Four-Channel Output
Rated at 100W RMS x 4 at 2Ω, the amplifier can power four speakers from one compact chassis in a vehicle audio installation.
-
Flexible Crossover Setup
Selectable full-range, low-pass, and high-pass modes from 50Hz to 250Hz let you shape the output around connected speakers and subwoofers.
-
Read Status At A Glance
Power, Status Mode, and Clip LEDs give a quick view of operation, helping you monitor the amplifier while setting levels and checking for clipping.
-
Space-Conscious Installation
The compact digital Class D chassis measures 8.25 x 4.92 x 1.81 inches, making it easier to fit in tight vehicle locations without using extra trunk space.
-
Installation Hardware Included
Four-gauge power and ground terminals, 10-gauge speaker outputs, mounting screws, Allen keys, and spare fuses support installation and routine setup tasks.
Technical Specifications
- Product Type 4 Channel Car Amplifier
- RMS Power (2Ω) 100 Watts RMS x 4 at 1 kHz, 2Ω, 1% THD+N, 14.4 VDC
- RMS Power (4Ω) 60 Watts RMS x 4 at 1 kHz, 4Ω, 1% THD+N, 14.4 VDC
- RMS Power (Bridged 4Ω) 200 Watts RMS x 2 bridged at 1 kHz, 4Ω, 1% THD+N, 14.4 VDC
- Peak Power (2Ω) 400 Watts x 4 at 2Ω
- Peak Power (4Ω) 240 Watts x 4 at 4Ω
- Peak Power (Bridged 4Ω) 800 Watts x 2 bridged at 4Ω
- Distortion less than 0.03% THD+N at 1 Watt RMS (20 Hz to 20 kHz)
- Low Pass Crossover 50Hz - 250Hz
- High Pass Crossover 50Hz - 250Hz
- Power and Ground Terminals 4 AWG
- Speaker Wire Outputs 10 AWG
- Heatsink Aluminum
- Frequency Response 4Hz to 45 kHz at +/-3 dB
- Signal to Noise Ratio 75 dBA (reference 1 Watt RMS)
- Input Signal Sensitivity 0.2 Vrms - 6.05 Vrms
- Stereo Separation -55 dB at 5 kHz
- Operating Voltage 9 VDC - 16.1 VDC
- Idle Current Draw 1 Amp
- Damping Factor 68.43
- Fuse Rating 20A x2 (Internal fuses)
- Power Supply High-Speed MOSFET
- Audio Topology Digital Class D
- Crossover Full Range/Low Pass/High Pass Configurable
- RCA Input RCA input terminals
- LED Indicators Power, Status Mode, Clip
- Dimensions 8.25" x 4.92" x 1.81"
Support
The RDF-3 is rated at 100W RMS x 4 at 2Ω or 60W RMS x 4 at 4Ω. For a bridged setup, the listed output is 200W RMS x 2 at 4Ω. Match the speaker load to the rating for your chosen wiring configuration.
Yes. The RDF-3 lists a two-channel bridged configuration at 4Ω, so it can be used when your installation calls for two bridged channels instead of four separate channels. The supplied specifications do not list a bridged rating below 4Ω.
You can select full-range, low-pass, or high-pass operation. Both the low-pass and high-pass crossover ranges run from 50Hz to 250Hz, giving you a way to adjust the signal for the connected speakers and the system's intended frequency range.
The amplifier measures 8.25 x 4.92 x 1.81 inches. Its compact Class D chassis suits installations with limited space. Use those dimensions to check your planned mounting location. The RDF-3's specifications do not list a ventilation-clearance measurement.
The RDF-3 has 4 AWG power and ground terminals, 10 AWG speaker outputs, and two internal 20A fuses. These details help you plan connections, but terminal capacity alone does not specify the correct cable size for every cable length or installation.
The RDF-3 has Power, Status Mode, and Clip LED indicators. They provide a visible reference while checking amplifier operation and setting levels. The RDF-3's specifications do not describe individual Status Mode light patterns or their troubleshooting meanings.
Mounting screws, Allen keys, and spare fuses are included with the amplifier. The RDF-3's specifications do not list quantities for these accessories, so do not plan on a particular count when preparing your installation.