Skip to product information
1 of 10

Rockville

MRD600.1

MRD600.1

Marine Class D Mono Amplifier, 600W RMS at 1Ω, 1-Ohm Stable, Includes Metal Bass Remote

Free Shipping

Regular price $114.95
Sale price $114.95 Regular price $114.95
Features
    • 600W RMS at 1Ω supports a single-channel marine subwoofer system
    • 400W RMS at 2Ω and 250W RMS at 4Ω support load matching
    • Marine-rated build pairs coated circuitry with sealed terminals and a resistant chassis
    • Compact 10.4-inch length fits tight boat installations
    • Metal bass remote includes a clipping indicator for signal checks
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
1-Year Warranty
    • MRD600.1 Marine Amplifier
    • Metal Bass Remote with Clipping Indicator
    • White Remote Cable
    • White Silicone Terminal Covers
    • Removable Caps for Unused RCA Terminals

SKU: SKU: MRD600.1

View full details

Product Details

The MRD600.1 is a marine Class D mono amplifier delivering 600W RMS at 1Ω for a compact boat audio system. Its sealed terminals, conformal-coated circuit board, and UV- and salt-resistant aluminum alloy chassis suit marine installations. At 10.4 inches long, it fits tight spaces without crowding other equipment. A metal bass remote with a clipping indicator lets you monitor signal limits and set subwoofer level from the listening area. Shape bass response with a 0dB to 12dB boost at 45Hz, a 50Hz to 200Hz low-pass filter, and a 10Hz to 50Hz subsonic filter. The input adjusts from 264mV to 8.0V for matching compatible source units. Tiffany-style RCA terminals and an 8 Volt preamp line output support signal routing to another amplifier. Rated RMS output is 600W at 1Ω, 400W at 2Ω, and 250W at 4Ω. Built-in protection circuitry, status and clip indicators, plus a soft-start system round out the installation features.

A Compact Marine Monoblock Built for Real Power

The Rockville MRD600.1 is a mono Class D marine amplifier that puts out a dyno-certified 600W RMS at 1Ω with 400W at 2Ω and 250W at 4Ω. A high-speed MOSFET power supply, true Class D circuitry, and a built-in 60A fuse rating (2 x 30A maxi fuses) pack serious output into a 10.4" chassis.

Deep Bass You Can Dial In

A 45Hz bass boost (0dB–12dB), a 50Hz–200Hz low-pass filter, and a 10Hz–50Hz subsonic filter give you direct control over how your subwoofer performs. The included metal bass remote adds a clipping indicator, so you can push output to its cleanest maximum before distortion instead of guessing by ear.

From Wakeboard Boats to Fishing Rigs

The compact footprint fits under seats, inside consoles, and in the tight equipment bays common on pontoons, center-console fishing boats, and wakeboard boats. The 264mV–8.0V input range matches most marine and aftermarket head units, and Tiffany-style RCA terminals with an 8V preamp output make daisy-chaining a second amp straightforward.

Marine Toughness in Every Detail

A conformal-coated PCB, UV and salt-resistant aluminum alloy chassis, and sealed terminals resist corrosion in saltwater conditions. White silicone terminal covers squeeze tightly around power, ground, remote, and RCA cables for extra water-tight seals, and removable caps protect unused RCA terminals. Stainless steel and aluminum construction extends to the hardware.

Add the MRD600.1 to Your System Today

If you want deep, reliable bass that holds up to sun, spray, and long days on the water, the MRD600.1 delivers the power and protection to back it. Add it to your cart and give your boat's audio the low end it's missing.

Features

    • Marine-Ready Protection

      Conformal-coated boards, sealed terminals, and a UV- and salt-resistant aluminum alloy chassis help this amplifier suit demanding boat installations over time.

    • Fits Tight Spaces

      At 10.4 inches long, the compact chassis fits boat installations with limited room while leaving space for other audio components and wiring.

    • Check Levels While Listening

      The included metal remote has a clipping indicator, letting you monitor signal limits and adjust subwoofer level from the listening area.

    • Shape Subwoofer Response

      A 0dB to 12dB boost at 45Hz, 50Hz to 200Hz low-pass filter, and 10Hz to 50Hz subsonic filter help tailor the low end.

    • Match Your Source Unit

      Input sensitivity adjusts from 264mV to 8.0V, while Tiffany-style RCA terminals and an 8 Volt preamp output support compatible audio system connections.

Technical Specifications

  • Product Type Marine Class D Mono Amplifier
  • RMS Power (1 Ohm) 600 Watts RMS @ 1Ω, 1% THD+N (75% efficient)
  • RMS Power (2 Ohm) 400 Watts RMS @ 2Ω, 1% THD+N (85% efficient)
  • RMS Power (4 Ohm) 250 Watts RMS @ 4Ω, 1% THD+N (90% efficient)
  • Peak Power (1 Ohm) 2400 Watts x 1 Channel
  • Peak Power (2 Ohm) 1600 Watts x 1 Channel
  • Peak Power (4 Ohm) 1000 Watts x 1 Channel

Support

Need Additional Assistance?

Contact Support

Hear From Our Customers

California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov