Package Includes:

(2) Kicker 10" Car Subwoofers
(1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box
(1) Rockville dB15 6000 Watt Peak/1500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp
(1) Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's
20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
20 Feet of 14 AWG Blue Speaker Wire
4 Spade Terminals

Authorized Kicker Dealer!

Description for Kicker Subs:

Square Matters
The Solo-Baric's cutting-edge, square-sub design means more cone area, more air displacement and more volume than a round woofer.

Features:

Kicker L7S102 10" 1200 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S10-2
Dual Two-Ohm Voice Coils
Injection-Molded Polypropylene Cone
Patented Corner Ribs Minimize Distortion
SoloKon™ 360-Degree Back Bracing
Ribbed Santoprene Surround With Blue Surround Stitching
UniPlate&trde; Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
Thick Tinsel Leads
Large Ceramic Magnet
Cast Aluminum Basket
Satin-Nickel Plated, Spring-Loaded Speaker Terminals
The Solo-Baric L7S 10-Inch Subwoofer works best with a sealed or ported enclosure and 600 watts of recommended power. See below for more details.

Specifications:

Size: 10" (25.4 cm)
Impedance: 2 Ohms DVC
Max Rec Amplifier Power: 1200 Watts Peak / 600 Watts RMS
Sensitivity: 86.8 dB 1w/1m
Frequency Response: 24Hz - 100Hz
Mounting Depth: 6-1/4" (15.9 cm)
Mounting Cutout, Square: 9-5/16" (23.7 cm)
Min Rec Sealed Box Volume: 0.66 cu. ft. (18.7 liters)
Max Rec Sealed Box Volume: 1.0 cu. ft. (28.3 liters)
Min Rec Vented Box Volume: 1.25 cu. ft. (35.4 liters)
Max Rec Vented Box Volume: 2.25 cu. ft. (63.8 liters)

Description for Rockville Enclosure:

The RDVK10 dual 10" vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure
Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar
Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
3/4" USA Heavy Duty MDF Construction
Machine precision cut mounting holes
Top of the line Glue for extra durable adhesion
Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Tuning frequency: 42Hz

Enclosure Measurements:

Type of Enclosure: Vented
Enclosure Sub Size: Dual 10" Square
Dimensions in Inches: 32" Width x 14.5" Depth x 12" Height
Top and Bottom Depth: 14.5"
Mounting Depth: up to 13.75" (enough depth for any sub on the market)
Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.6 Cubic Feet
Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.2 Cubic Feet

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
20 Feet of 14 AWG Blue Speaker Wire
4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

Video of RWK01:

Description:

The Rockville RWK01 0 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is lost per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires have a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

Features:

Rockville RWK01 0 AWG (American Wire Gauge) Complete Car Amp Installation Wire Kit
17’ – 0 Gauge Translucent Blue SuperFlex Power Cable
3’ – 0 Gauge Translucent Black SuperFlex Ground Cable
Gold Plated ANL Heat Resistance Fuse Holder
200 Amp ANL Gold Plated Fuse
(1) 17' High Grade Twisted Pair of 100% Copper RCA Cable
17' 12 Gauge Translucent Blue SuperFlex Speaker Wire
7’ Split Loom Tubing
17' 18 Gauge Blue Remote Cable
Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Soft abrasion proof insulating jacket allows for 100% improved flexibility
PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Video of dB15:

Description:

The dB15 is a mono amplifier with 6,000 watts peak output and 1500 watts Dyno-Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB15 features a fuse with a rating of 150 Amps. Although we rate these conservatively at 1500 watts Dyno Certified @ 2 ohms, this amplifier puts out more power than this!

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB15 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

The RCA input accepts both balanced and un-balanced inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.

The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Each and every amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production, and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and inspect 20% of all the production items. We test the power, the controls, and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected we will send you a pre-paid shipping label and give you all of your money back. This means if for any reason you want to return the amplifier back for a full refund within 90 days, you can! (Amp must be complete along with the box).

Includes:

Amplifier
Bass Remote
Birth sheet with tested power
Owner’s manual
Mounting Screws
Warranty

Features:

Rockville dB15 6000 Watt Peak/1500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 1500 Watts x 1 Channel <1% THD+N
- 4 Ohm: 900 Watts x 1 Channel <1% THD+N
Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm: 6000 Watts x 1 Channel
- 4 Ohm: 3600 Watts x 1 Channel
High-Speed MOSFET Power Supply
Optical Coupler Class “D” Technology
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
Low Pass Filter: 50Hz - 250Hz
Subsonic Filter: 15Hz - 55Hz
Phase Control Switch
Full IC-Controlled Protection Circuitry
Remote Dashboard Subwoofer Control
Fully Adjustable 12dB Bass Equalizer
Mute and Delay Soft Start System
RCA Preamp Line Output
8 Volt Preamp Circuitry
Status Mode LED Indicator
Minimum THD at Rated Power: <0.1%
S / N Ratio: >90dB
Under Voltage Protection at 10V
Over Voltage Protection at 16V
Frequency Response: 15Hz - 250Hz
Damping Factor: >150 @ 100Hz
150 Amp Fuse
Dimensions: (W x H x L)9" x 2.4" x 17.8"

DJ Bundles

Fitness Bundles

Studio Monitors

Commercial Packages

Commercial Receiver & Amplification

DJ Bundles

Fitness Bundles

Studio Monitors

Commercial Packages

Commercial Receiver & Amplification

2) Kicker L7S102 10" SoloBaric L7S Subs+Vented Enclosure+1500W Amplifier+Amp Kit

2) Kicker L7S102 10" SoloBaric L7S Subs+Vented Enclosure+1500W Amplifier+Amp Kit

Features

Hear From Our Customers

California Propositing 65 Warning: Cancer And Reproductive harm - WWW.P65 Warnings.ca.gov