Package Includes:

• (1) American Bass XR-10D2 2000w 10" Competition Car Subwoofer 3" Voice Coil/200 Oz
• (1) Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

---

Description of XR 10 D2:

American Bass has designed the XR series subwoofer for the ultimate low bass enthusiast. The XR series will deliver crisp bass surpassing the competition.

Newly re-designed, the wire terminals are all repositioned to one side of the speaker for easy installation. Consisting of a fiberglass reinforced cone, cast frame, and stitched rubber surround.

Features:

• American Bass XR-10D2 2000w 10" Competition Car Subwoofer 3" Voice Coil/200 Oz
• RMS: 1000 Watts
• MAX: 2000 Watts
• Impedance: Dual 2-ohm
• Fo: 35 Hz
• Imp: 4+4
• Sensitivity@1w/1m: 88 dB
• Frequency Range: 30Hz-500Hz
• Magnet: 200 Oz
• Voice Coil: 3 inch
• Mounting Depth: 7.087 inch
• Mounting Diameter: 9.764 inch
• Shipping Dimension (L x W x H): 12 in. x 12 in. x 11 in.
• Shipping Weight: 30 lbs

Enclosure Specifications:

• 1.25 cubic feet ported, 1 cubic feet sealed

---

Features of RQB10:

• Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft 
• Single 10" Side Ported
  
• Finished with Durable Bed Liner
  
• 3/4" MDF
  
• High Quality Spring Loaded Terminal
  
• Air Space: 1.4 Cubic Feet
  
• Tuning Freq- 39Hz
  
• Mounting Depth: 8"
  
• Height: 11"
  
• Width: 20"
  
• Depth: 14"
• Cutout diameter: 9.185"

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.