- (1) Crown Pro XLS1002 XLS 1002 700 Watt DJ/PA Power Amplifier Amp, Only 8 LBS + DSP!
- (1) Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables
Authorized Crown Audio Dealer!
Features:
- Crown Pro XLS1002 700 Watt DJ/PA Power Amplifier, with DSP
- RMS Power @ 2 Ohms: 550 Watts x 2 Channels
- RMS Power @ 4 Ohms: 350 Watts x 2 Channels
- RMS Power @ 8 Ohms: 215 Watts x 2 Channels
- RMS Power @ 4 Ohms Bridged: 1100 Watts x 1
- RMS Power @ 8 Ohms Bridged: 700 Watts x 1
- Frequency Response: 0 dB, -1dB
- Sensitivity: 1.4Vrms
- Signal to Noise: > 97dB
- THD: <0.5%
- Distortion: <0.3%
- Crosstalk: At 1kHz: > 85 dB, At 20kHz: >55 dB
- Damping Factor: > 200
- Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
- Higher DSP Capabilities: More control; has band pass filter per channel
- Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
- Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
- Set sleep mode after specified time without having to press a button
- Security setting disables menu buttons; menu locked/unlocked by entering combination
- System reset allows factory settings to be restored
- Remote Power Trigger
- Peakx™ Limiters provide maximum output while protecting your speakers
- XLR, 1/4", RCA inputs provide flexibility
- Integrated PureBand™ Crossover System for better performance and control
- Efficient forced-air fans prevent excessive thermal buildup
- Product Dimensions: 19" x 3.5" 7.7" inches
- Product Weight: 8.6 Lbs.
Click here for the Owner's Manual
Includes:
- DJ1500 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼” adapter
Video of DJ1500:
Description:
Rockville brings you Pro quality DJ headphones at an incredible price with its new DJ1500. These headphones are tailor made to meet the demanding needs of today’s DJs. The DJ1500 features large over-the-ear swiveling cups with superbly comfortable foam ear pads (interchangeable soft suede or leather finish cushions included) that seal tight around the ear for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering an extended frequency range and incredible bass response. You’ll hear pronounced vocals; rich, deep bass, rich mids, and crisp highs that will make mixing tracks a breeze. We’ve also incorporated exclusive sound isolation technology which helps to greatly reduce background noise.
The DJ1500 features a clean modern look with ergonomically designed ear cups that swivel 45° up and can flip around 180°. The headband is made of soft supple leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. Improved rugged swivel joints can withstand the rigors of daily use and provide years of carefree use. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. We also provide a hard leather case to store and protect your new investment when you are on the go.
With deep bass response, optimal sound reproduction, and a sleek modern design the DJ1500 will quickly become your first choice whether spinning wax at the club or practicing your mixing techniques at home.
Features:
- Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional DJ Headphones
- 40mm Neodymium drivers
- Ergonomically designed large over-the-ear swivel cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 47” coil cable made of 100% Oxygen Free Copper (158” fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼” adapter
- Hard leather carrying case
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 100±3dB
- Impedance: 32ohm
- Frequency Response: 8Hz – 22KHz
- Max. Power: 800MW
- Rating Power: 400MW
- Net Weight: 290g (with cable)
How to Set Up RMC-XLR:
Video of RMC-XLR:
Description:
The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.
You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.
We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.
The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.
90 Day Money Back Guarantee including return shipping!
If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please.
What's Included:
- Fully metal wired mic
- (2) 100% OFC Copper Mic cables (XLR to ¼” + XLR to XLR )
- Mic clip
- Plastic carry case
- Owner’s manual
- Warranty
Features:
- Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!
Mic Features:
- M-56 Cartridge
- Full metal mic body
- Type: dynamic
- Neodymium magnet
- Polar Pattern: uni-directional
- Frequency Response: 80 - 13Khz
- Impedance: 600 Ohms ± 30%
- Sensitivity: -72 ± 3dB
Case Features:
- High quality plastic carry case protects the mic during transportation
- Comfortably holds microphone and mic cable
Cable Features:
- XLR to ¼” Cable
- XLR to XLR Cable
- 10 Feet each
- 100% OFC oxygen free copper
- Cable delivers crystal clear distortion free signal
- Cable is 5 MM thick with cover (22 AWG standard mic cable)
- XLR cable connectors are very solid and durable
Mic clip Features:
- Heavy Duty Standard Size Microphone Clip
- Stand Mountable
- Solid Plastic Construction with copper inside (part that screws to the mic)
- Black Color
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
- UPC:
- 613815782834
