Package Includes:
- (1) Crown Pro XLi1500 900w 2 Channel DJ/PA Power Amplifier Professional Amp XLI 1500
- (2) Rockville RSG15.24 Dual 15” 3000 Watt 3-Way 4-Ohm Passive DJ/Pro Audio Speaker
- (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper
Authorized Crown Audio Dealer!
Description:
Powerful. Reliable. Affordable.
The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.
Features:
- Crown Pro XLi1500 900 Watt 2-Channel DJ/PA Power Amplifier
- RMS Power @ 4 Ohms: 450 Watts x 2 Channels
- RMS Power @ 8 Ohms: 330 Watts x 2 Channels
- RMS Power @ 8 Ohms Bridged: 900 Watts x 1
- Frequency Response: 20 Hz - 20 kHz
- THD: <0.5%
- Distortion: <0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31 dB
- Damping Factor: 8 Ohms, 10 Hz to 400 Hz
- Signal to Noise Ratio (A-Weighted): >100 dB
- Crosstalk: -75 dB, -59 dB
- Input Sensitivity: 0.775V or 1.4V
- Input Impedance: 20k Ohms, 10k Ohms
- AC Voltage: 110-120V~60 Hz
- IEC Power Connector: 15A
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
- Product Dimensions: 19" x 3.5" 12.4" inches
- Product Weight: 28 Lbs.
How to Set Up Your Rockville RSG Speakers:
Video of RSG15.24:
All about your RSG15.2:
Description:
We are proud to introduce to you the Rockville RSG series of speakers. These are affordable speakers with high-end performance; specially built for DJ's as well as professional audio applications. After conducting strategic market research, Rockville is proud to bring you this new line of speakers that were engineered to combine incredible power handling, superior sound and unbelievable build quality. The goal was to create a line of passive DJ speakers that were double as good as the competition but cost half as much.
The Rockville RSG15.24 speaker system features two high quality 15" low frequency woofers with three electronic, high-efficiency piezo bullet tweeters and one high efficiency piezo compression horn tweeter that provide a true full-range of sound. This speaker produces an incredible amount of power. 3000 Watts peak, 2000 Watts Program Power, and 1500 Watts RMS Power. With 80 Oz magnets, you can be sure these speakers will produce the power you expect out of them.
Constructed using thicker than standard, high-quality, high-density materials our cabinets are strong and rigid yet light weight enough to make travel and set-up a breeze. Built-in ergonomic, recessed handles give these speakers additional carrying ease, for all you DJ's who travel from party to party. The sturdy custom-molded steel grill combined with corner protectors, pre-mounted rubber isolating feet, and durable aviation-grade black carpet make these speaker cabinets tough enough to withstand every day abuse.
Engineered from the ground up; the tapered trapezoidal shape produces wide, clear sound dispersion that will reproduce your program source materials loudly with accuracy and musical transparency.
Multiple inputs, typically found on high-end speakers are standard equipment on the Rockville RSG15.24. Two input connectors, ¼" IN/OUT and speakON connection make the Rockville RSG-15.24 able to integrate in to any existing amplification system. Additional installation flexibility is available via the reinforced.
So if you are looking for a top-of-the-line quality DJ speaker that is rugged, can handle lots of power, and sounds incredible then the Rockville RSG15.24 has got you covered. Built-to-last, these speakers are protected by a full one year warranty.
Features:
- Rockville RSG-15.24 Carpeted Passive Loudspeaker
- (2) Dual 15" Pro Audio Woofer
- (3) Piezo 3" Bullet Tweeters
- (1) High Efficiency Piezo Compression Horn
- RMS Power: 1500 Watts
- Program Power: 2000 Watts
- Peak Power: 3000 Watts
- 2.5" High Temperature Aluminum Voice Coil
- 4-Ohm Impedance
- Sensitivity: 105dB @ 1w/1m
- Frequency Response: 35Hz - 22 kHz
- SpeakON In/Out connections
- ¼" In/Out connections
- Dimensions: (20.5+13.2)x13.8x46in
- Weight: 61.7Lbs
- Rubber Isolating Feet
- Construction: Top quality MDF - Stapled, Bonded & Braced
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.Video of RCSS SPEAKON CABLES:
Video of RCSS1425:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
- 100% Copper Conductors for Lower Resistance
- Black PVC Jacket for Both Durability and Flexibility
- Intended for High-Current Applications Only, Not Line-Level Signals
- Length: 25 Ft
- Gauge: 14
- UPC:
- 613817071820
