Package Includes:

• (1) Crest X20R 12 Mono +4 Stereo In, 6 Aux +4 Sub & L/R+M Monitor Mixer
• (1) Rockville RXS20 Portable Mixer Stand

---

Description of X20R:

The Crest Audio(r) X-Series(tm) is regarded as the most sonically accurate and operationally quiet, professional-level rack-mountable console range in the audio industry. With high-end performance and rock-solid construction, the XSeries features a modular design and an extensive feature set suitable for any application. Available in main and monitor configurations, X-Series models feature up to 14 mono and four stereo inputs. Long-throw faders, versatile four-band semi-parametric EQ, channel inserts and high-quality microphone preamplifiers are standard. The X 18R and X 20R consoles have six configurable aux buses and three main buses that provide plenty of front-of-house mixing configurations, while the X 18RM and X 20RM have up to 12 mono or six stereo mix buses for floor or in-ear monitoring.

Features:

• 12 mono inputs + 4 stereo inputs , all with mic preamps and individual 48V phantom power witches
• 100 mm faders on all inputs and Left, Right and Mono (center) outputs, 60 mm faders on the four sub groups
• Four-band EQ on all inputs
• 18 dB per octave high-pass filters on mono input channels
• Insert on all inputs, subgroups, aux outs and L, R & M output
• Six aux buses, selectable pre or post fader in pairs
• Auxes 1 & 2 are configured as Level/Pan for stereo operation
• XLR L, R & Mono outputs switchable between line and mic level
• 1/4” TRS and RCA connectors provided on alt output, monitor output and tape input
• Internal universal power supply

Details:

• Frequency response: 20 Hz–20 kHz • +0/-1 dB Any input to any output (Ref 1kHz)
• T.H.D. + noise: Any output <0.01% THD 20 Hz to 20 kHz at +15 dBu out
• Noise: (22 Hz to 22 kHz Bandwidth) Mic EIN: <-128 dBu (Measured @+60 dB gain, 150O source)
• Bus Noise: Below –85 dBu (w/32 Channels Routed)
• Crosstalk: Channel Mute >90 dB
• Channel Routing >80 dB
• Channel fader attenuation >90 dB
• Aux Send attenuation >85 dB
• Phase shift: <+/-30 degrees 20 Hz to 20 kHz Mic in to Main out
• XLR inputs: XLR 4k Ohms Balanced
• Max voltage gain: Mic-In To Group To Left/Right Balanced Out = 100 dB
• Line-in and TRS: 10 kO balanced
• RCA tape input: 10 kO unbalanced
• Bus inputs: 10 kO balanced
• Main outputs: XLR, 100O Balanced (switchable between line or mic level)
• Group outputs: TRS 50O ground compensated
• Auxiliary outputs: XLR & TRS 50O ground compensated
• Headphones: Stereo, intended to drive > 8 Ohms
• Internal power supply: AC Input: 100-240 VAC, 50/60 Hz via 15A IEC Mains connector,

Weight And Dimensions:

• X-20R Inches: 19 X 4.5 X 17.5 MM: 482.6 X 114.3 X 444.5 Weight: 30 lbs 13.6 k
• Dimensions are Width X Depth (Front-to-Back) X Heigh

---

How to Set Up Your RXS20:

All About Your RXS20:

Unboxing Video of RXS20:

The RXS20 is the best mixer stand on the market! This mixer is universal and works with any mixer up to 300lbs! The stand is made out of steel making it sturdy and tough! This stand has a sleek black powder paint coating making it look very professional!

The RXS20 is collapsible for maximum portability and easy storage.

What is very unique about this stand is how adjustable it is.

You can adjust the width from 13.8” - 23.6” making this perfect for any mixer, DJ controller, or other device.

The height is adjustable from 24” - 36”

All the adjustments are quick and easy with our state-of-the-art adjustment mechanisms.

It comes equipped with soft padding to mount your audio gear on to prevent against any scratches on your device.

It also has rubber feet on the end of each leg as well to make the stand sturdy.

 Features:

• Rockville RXS20 Heavy duty mixer stand
• Universal with any mixer up to 300 LBS!
• Collapsable for maximum portability and easy storage
• Adjustable width (13.8” – 23.6” Inches) making this universal for any mixer and other gear
• Adjustable Height from 24” – 36” (Inches)
• Steel stand with sturdy arms
• Large enough for mixers, DJ gear, keyboards, and more
• Load capacity: 300 LBS
• 1 MM thick steel all around! This piece is rock solid! At Rockville we only make top quality gear!
• Best quality black powder paint coating
• Soft padding on mounting platform to protect your audio devices
• Rubber feet on the end of each leg
  
• 14.5 LBS (portable and light-weight)

Specifications:

• Weight Capacity: 300 lbs.
• Height Adjustment.: 24”-36”
• Width Adjustment: 13.8”-23.6”
• Base leg length: 19.5”
• Top arm length: 19.5”
• Construction: All-steel
• Color: Black Powder Coat Finish
• Item weight: 14.5 lbs
• Shipping Weight: 16.5 lbs
• Dimension of shipping carton: 24" x 20"  x 3.1"  (inches)
• Unit Dimensions when folded : 20” x 3.1” x 24”

---

About Rockville Quality Control Procedures: 
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.