Package Includes:

• (1) American Audio WM-419 4-Channel UHF Handheld Wireless Microphone System ADJ
• (4) Rockville RVMIC1 v2 Pro Tripod Microphone Stand Telescopic Mic Boom+Metal Joints
• (4) Rockville Universal Wireless Microphone Clip Flexible Plastic + Copper Threading

---

What's In The Box:

• 4x Hand Held Wireless Microphones (AA batteries included)
• 1x 4-Channel UHF Wireless Receiver
• 4x Detachable UHF Antennas
• 1x Power Supply
• 1x ¼” to ¼” stereo cable
• 4x Microphone clips

Description:

4-channel Wireless UHF Handheld Microphone System with Intelligent Frequency Autoscan with IR synchronization.

The American Audio WM-419 is a 4-channel UHF wireless microphone system that includes four wireless microphones, a wireless receiver with individual volume control and XLR audio output for each microphone, batteries and four mic clips. The WM-419 features American Audio’s Intelligent frequency Autoscan with IR synchronization with 50 channels per receiver (200 total), as well as, 16-Bit Pilot Technology to assist with eliminating frequency interface.

The WM-219 is designed for use in PA, karaoke, mobile entertainers, schools and houses of worship. It has a wireless range of 300 feet / 90M (line of site) and each microphone has 6-10-hour battery life.

Features:

• American Audio WM-419 4-Channel UHF Handheld Wireless Microphone System ADJ 
• 4 Channel Wireless Handheld Mic System
• Intelligent Frequency Autoscan with IR Synchronization
• Includes 4 Handheld MIC Transmitters with OLED Screen and 4 Mic Clips
• 50 Channels Available per Receiver (200 total)
• 16-Bit Pilot Technology to assist with eliminating frequency interference
• 4 Removable Antennas
• 4 XLR Balanced Outputs + 1 AF Mixed Out (1/4 Jack)
• Batteries Included

Specifications:

• Wireless Range: 300 ft. (90M) line of site*
• Battery life with full charge: 6-10 hours
• Operating Frequency Range: UHF 540-590MHz
• Dynamic Range: >98dB
• Total Harmonic Distortion: <1%
• Frequency Response: 50HZ ~ 14KHz 3dB
• Signal to Noise Ratio: >85dB
• Audio Output Level: 0-300mV (Balanced: 0-2V)
• Transmitting Power: +10sBM
• Actual wireless range will depend on RF signal absorption and interference
• 4 Channel Wireless Handheld Mic System
• Intelligent Frequency Autoscan with IR Synchronization
• Includes 4 Handheld MIC Transmitters with OLED Screen and 4 Mic Clips
• 50 Channels Available per Receiver (200 total)
• 16-Bit Pilot Technology to assist with eliminating frequency interference
• 4 Removable Antennas
• 4 XLR Balanced Outputs + 1 AF Mixed Out (1/4 Jack)
• Batteries Included
• 4x Hand Held Wireless Microphones (AA batteries included)
• 1x 4-Channel UHF Wireless Receiver
• 4x Detachable UHF Antennas
• 1x Power Supply
• 1x ¼” to ¼” stereo cable
• 4x Microphone clips
• DIMENSIONS / WEIGHT:
• Receiver Dimensions (L x W x H): 18.9” x5.9” x 1.7” / 480 x 155 x 45 mm (one rack mount unit)
• Receiver Weight: 3.5 lbs. / 1.6kg.

---

How To Set Up Your RVMIC1 V2:

How To Set Up a Dynamic Mic on Your RVMIC1 V2:

How To Connect a Condenser to Your RVMIC1 V2:

How To Set Up a Smartphone/Tablet Mount to Your RVMIC1 V2:

How To Set Up The ISOBOX to Your RVMIC1 V2:

All About Your RVMIC1 V2:

Description:

Introducing the latest iteration of Rockville Audio's microphone stand, the Rockville RVMIC1 v2. This Pro Audio Tripod Microphone Stand is a step up from its predecessor, designed with both the seasoned musician and the passionate beginner in mind.

The RVMIC1 v2 distinguishes itself with a new telescopic boom that provides remarkable versatility allowing a boom adjustment from 25” to 46.5” inches.

Durability is key in any studio or stage equipment, and the v2 doesn't disappoint with its all-metal joints. These upgraded joints promise longevity and stability, so you can focus on your performance without worrying about wear and tear.

Ergonomics is also enhanced with a new hand clutch featuring a more comfortable grip. This design ensures that adjustments are easy on your hands. Speaking of adjustments, the v2 boasts an adjustable height range from 36 inches to a towering 63 inches, catering to any user and any situation.

Compatibility is universal with the standard 3/8-inch threads and included 5/8-inch adapter, ensuring that the RVMIC1 v2 can accommodate a wide range of microphones. The foldable tripod design contributes to the stand's portability, while the included mic clip adds to its ready-to-use appeal.

Steel construction underlines the stand's robust build, yet it remains lightweight at just 4.5 lbs. This is a stand that promises to withstand the rigors of the road without adding burdensome weight to your gear.

Cable management is also thoughtfully addressed with a cable guiding clip, allowing you to run cables along the stand neatly, maintaining a tidy stage or studio space.

The dimensions of the stand's tubing are designed to offer strength and stability without excess bulk. And when the show is over, the stand collapses down to a compact 3 inches by 36 inches, making it a breeze to pack up.

Finished in a sleek black color, the Rockville RVMIC1 v2 Pro Audio Tripod Microphone Stand is not only built to perform but also to fit seamlessly into any stage or studio aesthetic.

In a market flooded with options, the Rockville RVMIC1 v2 stands out by offering a blend of durability, flexibility, and portability, all without sacrificing quality or breaking the bank. Whether you're recording in a professional studio or performing live, this microphone stand is built to elevate your audio experience.

Features:

• Rockville RVMIC1 v2 Pro Audio Tripod Microphone Stand
• V2 has a new telescopic Boom (25" to 46.5") (when collapsed its smaller then the old version, and when extended its significantly longer)
• V2 is upgraded with all metal joints (durable)
• Adjustable Height Range (36" to 63")
• V2 has a new hand clutch with a more comfortable grip
• Standard 3/8 Threads with 5/8 Adapter (Universal Compatibility)
• Foldable Tripod Design (Portable)
• Mic Clip Included
• Steel Construction
• Cable Guiding Clip for running cables along the stand neatly
• Leg Diameter: 0.75 inch
• Top Tube Diameter: 0.67" inch
• Lower Tube Diameter: 0.83 inches
• Boom tube size: 0.67 inch
• Easy adjustment, just turn the clutch and you can raise or lower the stand
• Black Color
• Lightweight (4.5 lbs.)
• Compact Dimensions When Collapsed (3" x 36")

---

Features:

• Rockville Universal Wireless Microphone Clip W/ Flexible Soft Plastic Construction and Copper Threading
• This is a high quality clip for standard sized wireless microphones
• Flexible and durable soft plastic construction
• Clip Works With Mic Diameters of 1.18" – 1.38” inches (30mm - 35mm)
• High density copper threading 5/8" x 27
• 5/8" diameter and 27 threads per inch (Fits standard wireless microphones by Rockville, Shure, Audio Technica, and other popular brands)
• Designed to fit standard sized wireless microphones
• Wireless mics have a larger diameter then wired mics so they require a larger mic clip such as this one
• Screws on and fastens to all standard microphone stands such as the Rockville RVMIC1 stand