- (1) Pair MTX WET65T 6.5" 300 Watt Marine Boat Wakeboard Tower Speakers - Black
- (1) MTX MUDPFC ProFit Cage Rollbar Clamp For MUD65P Tower Speakers
- (1) MB Quart NA2-400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
- (1) Rockville RockerBT Rocker Switch Bluetooth Controller+Aux For RZR/ATV/UTV/Cart
Authorized MTX Audio Dealer!
Description of WET65T:
Hard Driving Tower Sound
Compact black tower speakers that can be installed on any boat with available bar mounting space. The WET65T black MTX Marine Tower Speakers can project amazing sound to get you rocking big time. Crank them up in your boat and your wake boarder can ski to their favorite tunes.
True Marine speakers With Great MTX Sound
The WET65T is a 6.5" coaxial speaker with ABS enclosure capable of delivering up to 75-watts RMS power that is designed to mount to the tower of boats. These speakers are designed to withstand the elements. The polypropylene woofer and dome tweeter are weather resistant. The ABS enclosure is highly durable and includes a UV inhibitor that will prevent it from fading over time. The grilles feature ABS construction making them nearly unbreakable and all connections are made through the mounting bar and mounting bracket so no speaker leads are exposed and will not be corroded.
Features:
- Pair MTX WET65T 6.5" 300 Watt Marine Wakeboard Tower Speakers in Black
- Peak Power Handling: 150 Watts (Per Speaker)
- RMS Power Handling: 75 Watts (Per Speaker)
- Impedance: 4 Ohms
- Sensitivity: 87 dB
- Frequency Response: 60Hz - 20kHz
- Cone Material: Polypropylene
- Weather Resistant: IP67 Rating
- Weather Resistant Enclosure
- Fits Bars Between 2.25", 2.375", 2.5", and 3"
- Polypropylene Woofer and Soft Dome Tweeter
- Internal Crossover Network
- ABS Impact Resistant Grille with UV Inhibitor
- Tested 1500hrs to ASTM B117, D4329 Standard
Click here for the Owner's Manual
Description of MUDPFC:
Use the MUDPFC to replace the clamp included with the MUD65P cage mount speaker to fit on your ProFit or Profile style cage. Includes brackets for two MUD65P speakers.
Features:
- Replaces Mounting Bracket on MUD65P for Use on ProFit and Profile Style Cages
Features of NA2-400.2:
- MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
- Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
- Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
- Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
- Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
- Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
- Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
- Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
- Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- Marinized / Waterproof: Yes - Water resistant for durability in any environment
Specifications:
- Class: Full Range Class D
- Variable Voltage: 0.2V~9V
- Signal to Noise Ratio: >90dB
- Frequency Response: 20Hz-20kHz
- Crossover Type: Electronic 12dB Per Octave
- Low Pass Crossover: Switch Low Pass 300 Hz
- Bass Boost: 0-12dB@45Hz
- Subsonic Filter: 60Hz
- Power @ 2-Ohms: 2 x 200W
- Power @ 4-Ohms: 2 x 100W
- Total Channels: 2
- Audio Inputs: RCA
- Power Terminal 12v/GND: Molex 10 ga
- Speaker Terminal Wire Gauge: Molex Plug Connector
- Fusing: 1 x 30 Amps
- Certifications: Marine & Powersports
- Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
- Weight: 2.12 lbs (0.96 kg)
All About Your RockerBT V2:
How to install Bluetooth Controller in a UTV:
Description:
The Rockville RockerBT is the best quality Rocker switch Bluetooth controller on the market. Our engineers made sure this unit supports a full frequency range without passing through any distortion or unwanted Bluetooth noises. The advantage of a rocker switch controller is that it takes up no space. This is ideal for ATV’s, UTV,s, Side by sides, boats, golf carts, and more.
Our model has a remote wire output that goes to your amplifier which will automatically turn your amplifier on and off when the Bluetooth controller is on or off.
We also added an aux input and an aux output. The aux input allows you to connect any audio device such as an MP3 player, etc. The aux output will allow you to use this controller together with a receiver that has an aux input so you can add Bluetooth to a receiver that does not have it. However, the majority of applications will use this controller instead of a receiver.
A typical ATV install would consist of this rocker switch as the source unit, an amplifier to give power to your speakers, and 2 or 4 speakers. You can also add a subwoofer and a second amplifier if you choose.
Features:
- Rockville RockerBT Bluetooth controller Rocker Switch
- Aux Input
- Remote Output allows you to turn any amplifier on or off
- Simple 5-Button Operation, - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off
- Mounts into a Standard Rocker Switch opening
- 3.5 mm Aux input
- 3.5 mm Aux output
- Volume Controls the Bluetooth & AUX
- Replaces Head Unit and Works with Any Amplifier
- Perfect for Polaris/ATV/UTV/RZR/Golf carts, Boats, and more
- Marine Grade Protection: Meets or exceeds the American Boat and Yacht Council (ABYC) marine electronics standards and the American Society for Testing and Materials (ASTM)
- Bluetooth version 4.0
- Hassle Free Bluetooth Auto-Pairing
- Pre-amp Output
- Power and Ground Connections
- Back Lit Buttons for Easy Use Day or Night
- High quality buttons with a click feel when pressed (Perfect so you can click the button while riding)
- Dimensions: ( W x H x D ) 1.04" x 2.02" x 2.64" (Inches)
Owner's manual
- UPC:
- 613817028343
