Package Includes:

• (1) Pair of Rockville WB65LED 6.5" Metal Marine Wakeboard Speakers+Swivel Brackets+LED's
• (1) MB Quart NA2-400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
• (1) MB Quart N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller

---

Please read: 
We manufactured this product to have LED’s however due to a manufacturing error the LED’s will not last very long. The speakers are amazing and perform perfectly. Actually these are one the best sounding speakers we have heard. Due to the LED not working we are selling them for half price. If you are looking for the best wakeboard speakers and do not need the LED lights then take advantage of this opportunity! But please make sure you understand the LED lights will not work. If you require LED lights then do not order this item. 

 

Includes:

• Pair 6.5” Marine Wakeboard Tower Speakers With Built in LED’s
• Waterproof Leading Wire
• Mounting Brackets and Mounting Hardware
• ABS Chrome Grill
• Installation Hardware
• Wiring Instructions
   

Description of WB65LED:

The WB65LED 2-Way marine wakeboard tower speakers with built in LED’s by Rockville are the newest addition to the Rockville marine audio lineup. These speakers are both sleek and durable. You get a pair of 6.5” waterproof speakers in a stainless steel enclosure with a chrome grill finish. Each speaker is equipped with a 1” titanium dome tweeter and a 6.5” long excursion woofer. Each speaker can handle 150 watts RMS & 300 watts peak! The built in blue LED’s are both reliable and look great! They really complete the sleek look of these speakers. Adding these tower speakers to either your boat, jeep, or UTV will surely enhance the look of your ride!

Rockville engineers care about quality and sound more than anything else. The WB65LED was designed with good looks and durability in mind. The grill is constructed from ABS and is painted in chrome for an amazing finish. The 1” titanium dome tweeters really make the sound of these speakers stand out. The highs on these speakers are crisp, clear, and extremely loud! The long excursion woofer is both reliable and sounds great. The material used on these woofers are the same materials used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition, rubber is an extremely waterproof material. The long excursion woofer makes for low end bass and mids that truly make these speakers sound amazing!

The mounting brackets are made of aluminum and built to last. These brackets are light weight, durable and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360° rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the flexibility to rotate the speaker to the front or rear of your ride.

We use only marine grade components and materials making these speakers truly waterproof. They will not get damaged by fresh water, salt water, or moisture. In addition to wakeboard towers on boats, these speakers are versatile and are perfect for installing in Jeeps, ATVs, and UTVs.

Features:

• Pair Rockville WB65LED 6.5" 600w Metal Marine Wakeboard Tower Speakers w/ LED's
• Peak Power Handling: 300 Watts (Per Speaker)
• RMS Power Handling: 150 Watts (Per Speaker)
• Frequency Response: 500Hz – 20KHz
• Sound Pressure Level: 90dB
• Impedance: 4 Ohms
• Stainless Steel Enclosure
• Aluminum Mounting Bracket
• Quick and Easy Speaker Angle Adjustment
• Bracket Rotates 360°
• 1" Titanium Dome Tweeter
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Resistant to Water, Rust, and UV Rays
• Polypropylene Mica Injected Cone with Rubber Surround
• 15 oz High Density Magnet
• 1” Voice Coil
• CE and RoHS Certified
• These Wakeboard Speakers Fit Bars Ranging From 1.75" to 2.5" inches
• Color: Stainless Steel
• Product Dimensions (H x W x D): 7.8" x 7.8" x 11.8" inches (Per Speaker)
• Product Weight: 5.3 lbs. (Per Speaker)

Owner’s Manual

---

Features of NA2-400.2:

• MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
• Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  
• Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
  
• Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  
• Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
  
• Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
  
• Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
  
• Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
  
• Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  
• Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  
• Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  
• Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
  
• Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  
• Marinized / Waterproof: Yes - Water resistant for durability in any environment

Specifications:

• Class: Full Range Class D
  
• Variable Voltage: 0.2V~9V
  
• Signal to Noise Ratio: >90dB
  
• Frequency Response: 20Hz-20kHz
  
• Crossover Type: Electronic 12dB Per Octave
  
• Low Pass Crossover: Switch Low Pass 300 Hz
  
• Bass Boost: 0-12dB@45Hz
  
• Subsonic Filter: 60Hz
  
• Power @ 2-Ohms: 2 x 200W
  
• Power @ 4-Ohms: 2 x 100W
  
• Total Channels: 2
  
• Audio Inputs: RCA
  
• Power Terminal 12v/GND: Molex 10 ga
  
• Speaker Terminal Wire Gauge: Molex Plug Connector
  
• Fusing: 1 x 30 Amps
  
• Certifications: Marine & Powersports
  
• Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
  
• Weight: 2.12 lbs (0.96 kg)

---

Description of N1-WBT:

A high-end sound, marine certified waterproof wired bluetooth preamp controller for boats, off-road vehicles or project vehicles audio installation needs. With simple audio outputs to connect to an amplifier the N1-WBT allows simple installation to play music via any Bluetooth enabled device.

Features:

• MB QUART N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller
• Source Type: Waterproof wired bluetooth preamp controller
  
• Input Types: Bluetooth
  
• Control Buttons: Large, Waterproof - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off
  
• Bluetooth™ Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process

Specifications:

• Bluetooth Range: 32' (10 Meter)
  
• Pre-amp Outputs: 1
  
• Pre-amp Voltage: 2v
  
• Controller Dimensions: controller 2" (4.8cm) round
  
• Dimensions Mounting Hole: 0.8" (2.2cm)
  
• Dimensions Mounting Depth: 0.8" (2.2cm)
  
• Weight: 5oz (0.01K)