Package Includes:
- (1) Pair Rockville WB65KLED 6.5" 600w Black Marine Wakeboard LED Tower Speakers+Remote
- (1) Rockville RMC65LB 6.5 " 600w 2-Way Black Marine Speakers w/Multi Color LED+Remote
- (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote
- (1) Rockville KRYPTON MF3 1600w Peak / 400w RMS 4 Channel Marine Amplifier Boat Amp
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Video of WB65KLED:
What's Included:
- Pair 6.5" black marine wakeboard tower speakers with built in LED's
- Waterproof leading wire
- Mounting brackets and mounting hardware
- ABS chrome grill
- Installation hardware
- Wiring instructions
The
WB65KLED 2-way marine wakeboard tower speakers with built in LED's by Rockville are the newest addition to the Rockville marine audio lineup. These speakers are both sleek and durable. You get a pair of 6.5" waterproof speakers in a black enclosure. Each speaker is equipped with a 1" titanium dome tweeter and a 6.5" long excursion woofer. Each speaker can handle 150 watts RMS and 300 watts peak! The built in blue LED's are both reliable and look great! They really complete the sleek look of these speakers. Adding these tower speakers to either your boat, jeep, or UTV will surely enhance the look of your ride!
Rockville engineers care about quality and sound more than anything else. The WB65KLED was designed with good looks and durability in mind. The grill is constructed from ABS. The 1" titanium dome tweeters really
make the sound of these speakers stand out. The highs on these speakers are crisp, clear, and extremely loud! The long excursion woofer is both reliable and sounds great. The material used on these woofers are the same materials used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition, rubber is an extremely waterproof material. The long excursion woofer makes for low end bass and mids that truly make these speakers sound amazing!
The mounting brackets are made of aluminum and built to last. These brackets are light weight, durable and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360 degree rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the flexibility to rotate the speaker to the front or rear of your ride.
We use only marine grade components and materials making these speakers truly waterproof. They will not get damaged by fresh water, salt water, or moisture. In addition to wakeboard towers on boats, these speakers are versatile and are perfect for installing in Jeeps, ATVs, and UTVs.
Features:
- Pair Rockville WB65KLED Black 6.5" Polished Silver Wakeboard Tower Speaker w/ Built in LED's
- Peak Power Handling per speaker: 300 Watts
- RMS Power Handling per speaker: 150 Watts
- Frequency Response: 50Hz - 20kHz
- Sound Pressure Level: 90dB
- Impedance: 4 Ohm
- Black enclosure
- Aluminum Mounting Bracket
- Quick and Easy Speaker Angle Adjustment
- Bracket rotates 360 degrees
- 1" Titanium Dome Tweeter
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Resistant to Water, Rust, and UV Rays
- Polypropylene Mica Injected Cone with Rubber Surround
- 15 oz High Density Magnet
- 1" Voice Coil
- CE and RoHS Certified
- These wakeboard speakers fit bars ranging from 1" to 2.5"
- Dimensions per speaker (H x W x D): 7.8" x 7.8" x 11.8"
- Weight per speaker: 5.3 lbs
- Color: Black
Includes:
- Pair of 6.5" marine speakers
- 16.4 feet of Speaker Wire
- Mounting Screws
- LED Remote Controller
The RMC65L is the same
amazing speaker as our RMC65 with the addition of an awesome LED lighting system built in. Our LED speakers feature 19 dynamic modes that
are adjustable through the remote. There are 20 switchable static colors which can also be set through the remote. You can also strobe the
lights and adjust the speed through the remote. You can adjust the brightness intensity of the light as well. There is a demo mode that
will run through 9 dynamic programs and repeat.
The RMC series of
marine speakers by Rockville are a major upgrade to our old RMS series. Don’t get me wrong we loved our old series, but we strive for
perfection. We wanted a speaker that is more durable, more water resistant, can handle more power, and put out better sound quality!
As always we sent our
team on a speaker-hunting adventure. We tested countless prototypes until the RMC series was born. We ended up with a speaker that has a lot
more bass and mids than any other speaker on the market at this price point. This speaker will destroy all those cheap dual cone speakers, and
it will compete with top branded marine speakers on the market today!
These speakers are
completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage.
Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!
Rockville engineers
care about quality and sound more than anything else. The RMC65L was designed in a molded ABS plastic basket. The polypropylene cone is
reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate
unwanted distortion. In addition rubber is a very waterproof material. The ½" polymer tweeter puts out incredible sounding highs. The low end
bass and mids of these speakers really makes them stand out.
The RMC65L 6.5" marine
speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater, freshwater or any other harsh
environments. These speakers can withstand tons of abuse and can handle 300 watts peak and 75 watts RMS each. These Rockville speakers comply
with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant
means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other
brands stated higher wattage the Rockville RMC65L speakers were able to handle more than double the power!)
Using only true marine grade components and materials, the Rockville RMC65L speakers are fully marinized against salt & fresh water
conditions. They will not get damaged by fresh water, salt water, or moisture. There is also an additional waterproof and UV resistant
coating to completely protect the speakers.
The speakers come with everything you need for installation including pre mounted grills and mounting hardware.
Features:
- Rockville RMC65L 6.5” 2-Way 300 Watt Marine Boat Speakers with LED Light System
- CEA Compliant Power Ratings
- Power Rating: 300 Watts Peak /75 Watts RMS Per Speaker
- System Power: 600 Watts Combined
- 19 Dynamic LED Modes
- 20 Switchable static LED Colors
- 256-Grade PWM
- Adjustable LED Strobe Speed
- 5 Adjustable LED Brightness Settings
- Slim Card Type LED Remote
- Demo LED Mode
- Included Remote can be paired with one or more speakers
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Waterproof and rustproof
- Stainless Steel Terminals
- Molded ABS plastic basket
- Polypropylene Mica Injected Cone
- Rubber Surround
- High quality ferrite magnet
- 13mm (0.5” inch) Polymer Tweeter
- Oversized 1” CCAW Kapton Voice Coil
- Pre-installed mounting screws included
- Perfect for both marine, outdoor, and car use
- Impedance: 4 Ohms
- Frequency Response: 55Hz - 20KHz
- Sound Pressure Level: 91dB @ 1w/1m
- Total Diameter: 7.09”
- Cutout Diameter: 5.31”
- Total Height: 2.48”
- Mounting Depth: 2.48”
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control
standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and
all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in
its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product
engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville
goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all
products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is
never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely
that you will need to use it.
How To Set Up Your RGHR2:
Included In The Box: Description: The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.
Crazy loud! We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.
Included wired remote Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.
Latest listening features The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.
Ability to connect multiple external amps This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplify your speakers and a subwoofer amplifier.
Features:
All about your RGHR2:
How To Install a Marine Amplifier onto Your Boat:
KRYPTON MF SERIES PRODUCT VIDEO:
What's in the Box: Description of KRYPTON MF3: We took the sound of our Krypton car amps and we added top of the line marine grade parts so that they will last forever and withstand even the harshest conditions on the water. We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new! This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. In high pass mode we allow you to filter out frequencies between 15Hz - 4K Hz. In full mode you will not be filtering any frequencies. The really cool part is in low pass mode you can use the high pass and low pass mode. So for example you can set the low pass mode to 50 hz, and then you can set the high pass to 15 Hz. In this case you would be playing frequencies in the range of 15-50 Hz on this channel. This would be an example of using the subsonic filter. Another option you have is for midrange speakers, you can use our low pass filter and set it really high. Lets say to 3Khz and then you can set the high pass to 150Hz and your midrange speakers will only play that frequency range. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire. The KRYPTON MF3 is protected by a fully IC controlled circuit which includes mute, delay and soft start technology so that the amplifier will turn on safely every time and protect your speakers from popping. You will also notice we decided to add a cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time. This is a class A/B amplifier which is what we recommend to get the best sound quality out of full range speakers. One other cool features about this amp is the marine public address system. Simply plug the microphone into the 3.5mm jack and you are ready to go. The amplifier features talk-over functionality. When the microphone is being used the music will fade to the background until you stop talking into the mic. Features:
- UPC:
- 613817185466
