- (1) (2) Rockville WB65 Black 6.5" 600w Metal Marine Wakeboard Swivel Tower Speakers
- (1) MB QUART NA2-400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
- (1) MB QUART N2-WBT Rocker Switch Bluetooth Controller For Polaris RZR/ATV/UTV/CART
- (1) Rockville RWK8ATV OFC Copper 8 AWG Gauge Amp Installation Wire Kit 4 RZR/ATV/UTV
Video of WB65:
Includes:
- Pair 6.5” Black Marine Wakeboard Tower Speakers
- Waterproof Leading Wire
- Mounting Brackets and Mounting Hardware
- ABS Chrome Grill
- Installation Hardware
- Wiring Instructions
Description:
The WB65 2-Way marine wakeboard tower speakers by Rockville are the newest addition to the Rockville marine audio lineup. These speakers are both sleek and durable. You get a pair of 6.5” waterproof speakers in a metal enclosure. Each speaker is equipped with a 1” titanium dome tweeter and a 6.5” long excursion woofer. Each speaker can handle 150 watts RMS & 300 watts peak!
Rockville engineers care about quality and sound more than anything else. The WB65 was designed with good looks and durability in mind. The grill is constructed from ABS. The 1” titanium dome tweeters really make the sound of these speakers stand out. The highs on these speakers are crisp, clear, and extremely loud! The long excursion woofer is both reliable and sounds great. The material used on these woofers are the same materials used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition, rubber is an extremely waterproof material. The long excursion woofer makes for low end bass and mids that truly make these speakers sound amazing!
The mounting brackets are made of aluminum and built to last. These brackets are light weight, durable and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360° rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the flexibility to rotate the speaker to the front or rear of your ride.
We use only marine grade components and materials making these speakers truly waterproof. They will not get damaged by fresh water, salt water, or moisture. In addition to wakeboard towers on boats, these speakers are versatile and are perfect for installing in Jeeps, ATVs, and UTVs.
Features:
- Pair Rockville WB65 Black 6.5" 600w Metal Marine Wakeboard Tower Speakers
- Peak Power Handling: 300 Watts (Per Speaker)
- RMS Power Handling: 150 Watts (Per Speaker)
- Frequency Response: 50Hz to 20kHz
- Sound Pressure Level: 90dB
- Impedance: 4 Ohms
- Black Enclosure
- Aluminum Mounting Bracket
- Quick and Easy Speaker Angle Adjustment
- Bracket Rotates 360°
- 1" Titanium Dome Tweeter
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Resistant to Water, Rust, and UV Rays
- Polypropylene Mica Injected Cone with Rubber Surround
- 15 oz High Density Magnet
- 1” Voice Coil
- CE and RoHS Certified
- These Wakeboard Speakers Fit Bars Ranging From 1.75" to 2.5" inches
- Color: Black
- Product Dimensions (H x W x D): 7.8" x 7.8" x 11.8" inches (Per Speaker)
- Product Weight: 5.3 lbs. (Per Speaker)
Features:
- MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
- Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
- Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
- Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
- Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
- Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
- Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
- Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
- Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- Marinized / Waterproof: Yes - Water resistant for durability in any environment
Specifications:
- Class: Full Range Class D
- Variable Voltage: 0.2V~9V
- Signal to Noise Ratio: >90dB
- Frequency Response: 20Hz-20kHz
- Crossover Type: Electronic 12dB Per Octave
- Low Pass Crossover: Switch Low Pass 300 Hz
- Bass Boost: 0-12dB@45Hz
- Subsonic Filter: 60Hz
- Power @ 2-Ohms: 2 x 200W
- Power @ 4-Ohms: 2 x 100W
- Total Channels: 2
- Audio Inputs: RCA
- Power Terminal 12v/GND: Molex 10 ga
- Speaker Terminal Wire Gauge: Molex Plug Connector
- Fusing: 1 x 30 Amps
- Certifications: Marine & Powersports
- Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
- Weight: 2.12 lbs (0.96 kg)
Description:
The MB Quart Nautic bluetooth controller is simple source unit solution designed to mount in a standard switch or accesory location. Features include: Back lighting and RCA outputs (Left & Right).
Features:
- MB QUART N2-WBT Wired Bluetooth Preamp Controller, Boat Polaris/ATV/UTV/RZR/CART
- Marine Grade Protection: Yes - Meets or excceds the American Boat and Yacht Council (ABYC) marine electronics standards and the American Society for Testing and Materials (ASTM)
- Source Type: Bluetooth - Allows to music via Bluetooth enabled devices
- Input Types: Bluetooth and 3.5mm jack - Bluetooth enabled devices and 3.5mm input from headphone output of mobile music device or phone
- Control Buttons: Fingertip Joystick - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off are all protected from the elements with the the unique Fingertip Joystick
- Bluetooth Connect: Yes - Bluetooth Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process.
- Additional Inputs: 1 pair RCA (Left & Right)
- Bluetooth Range: 32' - 10 Meter
- Frequency Response (Aux In): 20Hz - 20kHZ
- Pre-amp Outputs: 1pr Left/Right
- Pre-amp Voltage: 2V
- Display Type: Backlight
- Display Backlit: Dial is backlit
- Dimensions Mounting Hole: Swich Hole 0.83" x 1.41" (2.1cm x 3.58cm)
- Dimensions Mounting Depth: 2.5" (6.35cm)
- Dimensions Mounting Bezel: 4.15" (10.5 cm)
- Product Weight: 1.0 lbs (0.45 kg)
- Product Dimensions: 3.5" (8.89cm)
How to install an amplifier in your UTV:
Features:
- Rockville RWK8ATV 8 AWG Gauge Amplifier/Amp Installation Wire Kit For Motorcycle/RZR/ATV/UTV
- 6 Foot 8 Gauge 100% OFC, Red Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 6 Foot 8 Gauge 100% OFC, Black Flexible Ground Cable
- (2) 4 Foot 16 Gauge 100% OFC black Flexible Speaker Cables Protected by black nylon mesh
- 6 Foot Pre-terminated ring terminals make connections to the battery simple
- (1) Silver AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 60A AGU Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (4) Speaker Cable Terminals
- (4) Washers
- (10) White Cable Ties
- (1) hexagon spanner
- UPC:
- 613817185626
