Package Includes:
- (1) Rockville W8K6D4 V2 8" 1400w Peak Car Audio Subwoofer Dual 4-Ohm Sub 350w RMS
- (1) Rockville dB11 1400 Watt Peak/350 Watt RMS Mono 2-Ohm Amplifier Car Amp and Bass Remote
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Features:
- Rockville K6 Series 8" Dual 4-Ohm Car Subwoofer
- Peak Power Handling: 1400 Watts
- Program Power Handling: 700 Watts
- RMS Power Handling: 350 Watts
- 2" 4-Layer voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire)
- Double Stacked 70 Oz Magnet
- Cast Aluminum Basket With Black Sanded Finish
- Two Chrome-Plated Binding Post Terminals
- Black Non-Pressed Paper Cone
- Ultra-Stiff cone is extremely thick and strong
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Black stitching reinforces the cone and ensures long life
- Polypropylene (PP) Dustcap
- Impedance: Dual 4-Ohm Voice Coils
- Vented Holes on T-yoke Enhances Heat Dissipation
- Custom Rubber Boot Magnet Cover
- Custom Rockville Mounting Gasket makes it Easy To Mount the Subwoofer Air-Tight
- High BL Magnetic Motor Gap
- 2 layer spider made with thick gauge material that is resistant to tearing
- Cutout Diameter: 7.79" inches
- Mounting Depth: 4.13" inches
- Frequency Response: 44Hz - 1.5kHz
- 6mm T-Yoke + 6mm Washer
- Sensitivity: 83.4dB
- Sealed Enclosure Volume: 0.21-0.6 Cubic Feet
- Vented/Ported Enclosure Volume: 0.35-1.0 Cubic Feet
- 1-Way XMAX: 15 MM
- Weight: 8.82 Lbs.
- Shipping Weight: 11.5 Lbs.
- Shipping Box Dimensions: 11.41" x 11.41" x 11.81"
Video of dB11:
What's In The Box:
- (1) dB11 Amplifier
- (1) Bass Remote
- (1) Birth Sheet with Tested Power
- Owner's Manual
- Mounting Hardware
- Warranty
Features:
- Rockville dB11 1400 Watt Peak/350 Watt Dyno-Certified RMS Mono 2-Ohm Amplifier Car Amp+Bass Remote
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 350 Watts x 1 Channel <1% THD+N
- 4 Ohm: 220 Watts x 1 Channel <1% THD+N - Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm: 1400 Watts x 1 Channel
- 4 Ohm: 880 Watts x 1 Channel - High-Speed MOSFET Power Supply
- Optical Coupler Class "D" Technology
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: 50Hz - 250Hz
- Subsonic Filter: 15Hz - 55Hz
- Phase Control
- Full IC-Controlled Protection Circuitry
- Fully Adjustable 12dB Bass Equalizer
- Mute and Delay Soft Start System
- Status Mode LED Indicator
- Minimum THD at Rated Power: <0.1%
- S / N Ratio: >90dB
- Under Voltage Protection at 10V
- Over Voltage Protection at 16V
- Frequency Response: 15Hz - 250 Hz
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 - 17' High Grade Twisted Pair of 100% Copper RCA Cable
- 17' - 4 Gauge Translucent Blue SuperFlex Power Cables
- 17' - 18 Gauge Blue Remote Cable
- 17' - 16 Gauge Clear Speaker Wire
- 3' - 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7' Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- UPC:
- 613817066260
