Package Includes:
- (1) Rockville 10" Car Subwoofer
- (1) Rockville 10" Shallow 0.62 Cu Ft Sealed Car/Truck Subwoofer Enclosure Box
- (1) Alpine KTA-30MW 600 Watt Mono Amplifier Class-D Amp For Polaris RZR/ATV/UTV/Cart
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Video of T4 Series Shallow Mount Subs:
CEA Compliant Legitimate Power Ratings
Peak Power = Amount of power the sub can handle for a burst during the loudest point during a song. This number is not as important as the RMS power. This subwoofer has 1,200 watts peak which is a lot of power for a 10" subwoofer.
Program Power = The RMS power the way most middle of the road brands on the market rate their products. This sub can handle 600 watts program power. So for example a 600 watt RMS Hifonics amplifier will work perfectly with one of these.
CEA Rated RMS Power = This is an official tested rating by a specific industry standard. This is the way the top brands in the industry such as Kicker, Rockford, etc rate their items. This subwoofer is 300 watts RMS CEA rated. This rating is measured at a very specific distortion level. You can feel confident matching this with a high end amplifier from Kicker, or Rockford, or any other high end brand that uses CEA compliant ratings.
We supply all 3 ratings so that you can compare prices of our product to any brand on the market and also so you can confidently match this subwoofer to amplifiers from many other brands.
Description:
Rockville W10T4-S2 10" Subwoofers feature the thinnest mounting depths available making them the best shallow-mount driver's suitable for the most intricate bass installations. Deep bass that's made to fit where standard-sized subwoofers can’t. What else can you ask for?
The Rockville W10T4-S2 subwoofers feature a 2-Ohm single voice coil. These subwoofers are engineered to deliver serious low frequency response where space is limited. Whether installed behind the seat in a compact car, pick-up truck or in a motorcycle's saddlebags, make no mistake Rockville T4™ subs will rock you!
Utilizing a sophisticated “High-BL” motor structure together with a large-diameter, progressive-roll spider provides increased linearity and superior overall sound quality. A vented core magnet motor structure with extra thick back & top plates allows for full voice-coil extended peak-to-peak excursion, creating ultra deep bass response. Engineered with a special aluminum alloy high-temperature voice coil winding around the high-mass vented pole piece, helps to keep the woofers cool even when your music gets “hot”!
The Rockville W10T4-S2 is CEA-2031 compliant and rated with an amazing 1200 watts peak and 300 watts RMS. That means you are getting 100% accurate RMS power ratings. These days lots of brands have competitions over how many thousands of watts they can write on the box of their items. The problem is you do not know what you are getting from them. It is easy to print a box that says 2,000 watts Max. Our subwoofers are rated in the same way that other famous brands rate their products. We also feel our manufacturing engineers are the best. The sound quality on our Rockville subs are just amazing. Our engineers who design the subwoofers are all in in the USA and have over 30 years experience manufacturing car audio.
If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.
If you want the best value for a shallow mount car subwoofer, and you want a great quality product that sounds great, and you also want hassle free return policies, then we highly recommend these Rockville T4 subs.
Features:
- Rockville W10T4-S2 10" Shallow Mount 1200 Watt Car Subwoofer, CEA Compliant, 2-Ohm
- Power Handling: 1200 Watts Peak Power / 600 Watts Program / 300 Watts RMS (CEA Rating)
- 2" Voice Coil
- Ultra Stiff Paper Composite Cone
- 3D Molded High Gloss Acrylic Dust Cap
- Ultra Slim, Expanded and Rolled Steel Basket
- High Density Laminated Butyl Rubber Surround
- High Power Strontium Magnet with Ultra Saturated, High BL Motor Gap
- Vented Core Magnet Motor Structure
- High Temperature Aluminum Voice Coil Former
- Lightweight Compact Design Ideal for Any Installation
- Rubber Magnet Boot
- Magnet weight: 45 Oz
-
Dual Nickel Plated Spring Loaded Push Terminals
- Shallow Mount Subwoofer
- Impedance: SVC 2 Ohm
- Cutout Diameter: 9.1 Inches
- Mounting Depth: 3.39 Inches
- Frequency Response: 36 Hz to 500 Hz
- Sensitivity: 90dB @ 1w/1m
Enclosure Recommendations:
- Sealed: 0.50 cu. Ft - 1.0 Cu. Ft.
- Vented: 1.00 cu. Ft - 2.50 Cu. Ft.
- Vented Tuned at 45Hz: 1.00 cu. Ft. - 3.00 Cu. Ft.
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.How to install an amplifier in your UTV:
Description of KTA-30MW:
PRODUCT OVERVIEW
With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW is
sure to deliver powerful bass output for subwoofers used in those open cab
vehicles and toys.
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive
technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough
Power Pack is sure to deliver powerful bass output for subwoofers used in those
open cab vehicles and toys.
This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycles saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have
the space for a large amplifier. It is compatible with an aftermarket or factory
head unit and provides up to 600 DPP watts to the subwoofer of your choice.
DYNAMIC PEAK POWER
The KTA-30MW features Alpine’s exclusive Dynamic Peak Power (D.P.P.) technology
which intelligently adjusts the gain to automatically adapt to musical needs.
D.P.P. prevents the amplifier from clipping music signals by supplying up to
double the power to support power hungry, rhythmic peaks like a snare drums,
trumpets, or high-hat cymbals.
During these dynamic musical passages, D.P.P. instantly delivers bursts of power to rise to the peak demands of the music and very quickly rolls back down to maintain its efficiency.
WEATHER RESISTANT FORMAT
The KTA-30MW is ready for your adventures. It is weather resistant, rated at
IP66 for protection again dust ingress and high-pressure water spray. Its rugged
chassis and high-quality waterproof connector can be used in installations where
it will be exposed to the outdoor elements.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small
footprint lets it fit where most amplifiers won’t, like under the dash or in the
glove compartment, installed under the dash of a side-by-side, placed in the
saddlebag of a motorcycle, or used in other places where space is an issue.
Specifications:
- ALPINE KTA-30MW 600 Watt Mono Amplifier Class-D Amp For Polaris RZR/ATV/UTV/Cart
- Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
- Weather resistant (IP66 rating)
- CTA-2006-B Specifications: 300W RMS x 1 (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
- 600W x 1 Peak (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
- 83dB S/N (ref. 1W into 4Ω)
- ≤0.1% THD+N
- OEM-grade Tyco 26-pin connector with pigtail wire harness
- Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
- Sound control
- Crossovers: Variable Low Pass filter 50-400Hz @ -24dB/Oct.
- Input gain settings (variable)
- 2ch/4ch input (selectable)
Description of RSTS10:
The RSTS10 is a single 10" sealed subwoofer box is made in the USA with Grade “A” 5/8” MDF wood. This is a slim and shallow enclosure made for subs that require shallow mounting depth and very little air space. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The 5/8” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RSTS10 Single 10" .62 cu. ft. 5/8" MDF Sealed Shallow/Truck Subwoofer Enclosure Box
- Designed For 10" Shallow Mount Subwoofers
- Machine precision cut mounting holes
- 5/8” USA Heavy Duty MDF Construction
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work perfectly with high powered subs
- Designed to give the best sound quality
- Some Compatible Subwoofers: CLARION: PFW1051, SFW1051, PIONEER: TS-SW1041D, TS-SW2541D, TS-SW251, Ts-SW1241D, TS-SW3041D, TS-SW301, JL AUDIO: 12TW53, 13TW53
Enclosure Measurements:
- Type of Enclosure: Sealed Shallow
- Enclosure Sub Size: Single 10"
- Dimensions in Inches: 18.25" x 5.5" x 14.25"
- Top and Bottom Depth: 5.5"
- Mounting Depth: up to 4.5" (enough depth for any shallow sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 0.83 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.62 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613816244997
