Package Includes:

• (1) Rockville W10K6-D2 10” Car Audio Subwoofer 800 Watt CEA Compliant
  
• (1) Autotek ATA2000.2 2000 Watt 2 Channel Car Audio Amplifier
  
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wire Kit w/RCA's
  

Video of W10K6D2:

CEA Compliant - Legitimate Power Ratings!

Description:

Rockville W10K6-D2 10" Subwoofers deliver superior performance and increased power handling with infrasonic bass response surpassing all other woofers in its class. The Rockville K6™ Subwoofers are more than just good looks. They are the complete package.

Rockville K6™ Subwoofers offer some of the clearest, loudest bass around. K6™ Subwoofers feature a newly engineered composite treated pulp paper cone, which is reinforced with Kevlar fibers. The combination delivers the warm but hard-hitting bass that only paper is notorious for while completely eliminates flex and distortion using 360-degree Kevlar dispersion technique. Premium Rockville K6™ Subwoofer technology is built–in-to every facet of the subwoofer beginning with the motor structure. By engineering a high tolerance extended and vented pole piece it allows the K6™ Subwoofer to handle more power and withstand more abuse. In addition the continuous “heat-pump” effect from both spider venting and pole piece venting combine for superior heat dissipation and help to increase the subwoofers low frequency range. The linear progressive-roll Conex spider and heavy-duty steel basket’s perimeter venting guarantee heat dissipation without breakdown. Turn this baby over and you might think you are looking a the exhaust of a modern jet engine. What you are actually seeing is the Rockville unique Aero Vent System, which allows more heated air to pass out of the motor structure while inhaling more cool air from the surrounding atmosphere. Increased vented area = lower operating temperature = increased power handling.

Rockville W10K6-D2 Subwoofers utilize high-temperature, dual voice coils. A ribbed and double laminated foam surround reinforced with Santoprene and double stitched to the cone, provides the cone with added strength and complete control at high excursions. Standard spring-loaded push terminals provide for a quick and secure wire connection. The W10K6-D2 weighs in at 12 pounds. It's a heavy duty subwoofer.

Rockville K6™ subwoofers perform well in both sealed or vented enclosures.

The Rockville W10K6D2 is CEA-2031 compliant and rated with an amazing 800 watts peak and 400 watts RMS. That means you are getting 100% accurate RMS power ratings. These days lots of brands have competitions over how many thousands of watts they can write on the box of their items. The problem is you do not know what you are getting from them. It is easy to print a box that says 3,000 watts Max. Our subwoofers are rated in the same way that other famous brands rate their products. We also feel our manufacturing engineers are the best. The sound quality on our Rockville subs are just amazing. Our engineers who design the subwoofers are all in in the USA and have over 30 years experience manufacturing car audio.

You can feel confident taking a high powered amplifier to these subwoofers. They can handle a ton of abuse!  We actually test our subs with twice the amount of power they are rated at just for fun. These had no issues handling the power and sounding good doing it!

If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.

If you want the best value in car subwoofers, at the best price, with the best return policies, then we highly recommend these Rockville K6.

K6 Woofer Features:

• Rockville W10K6-D2 10" 800 Watt Dual 2-Ohm Car Subwoofer
• Power Handling: 800 Watts Peak/400 Watts RMS (CEA Rating)
• Kevlar Fiber Reinforced Ultra Stiff Paper Composite Cone
• 3D Injected Poly Dust Cap
• Expanded and Rolled Steel Basket
• High Density Double Laminated Stitched Foam Surround
• Ultra Saturated, High BL Magnetic Motor Gap
• Magnet Motor Heat Sink with Heat Pump Cooling Technology
• Aero Style Oversized Magnet Motor Vent
• High Temperature 4 Layer Aluminum Voice Coil Former
• Dual Layer Linear Progressive Conex Spiders
• Magnet Protection Rubber Band
• Dual Nickel Plated Spring Loaded Push Terminals

Details:

• Impedance: DVC 2-Ohm
• Cutout Diameter: 9 Inches
• Mounting Depth: 5.3 Inches
• Frequency Response: 27 Hz to 750 Hz
• Sensitivity: 92dB @ 1w/1m

Enclosure Recommendations:

• Sealed: 0.50 cu. Ft - 1.50 Cu. Ft.
• Vented: 0.75 cu. Ft. - 1.50 Cu. Ft.
• Vented Tuned at 45Hz: 0.50 cu. Ft. - 2.0 Cu. Ft.

Features of ATA2000.2:

• Autotek ATA2000.2 2000 Watt 2 Channel Amplifier Car Audio Amp
  
• Power Output: 1000 Watts x 2 Channel @ 2 ohms
• Power Output: 500 Watts x 2 Channels @ 4 ohms
• Mono Bridged Power Output: 2000 Watts x 1 Channel @ 4 ohms
• High level inputs
• Signal to Noise Ratio: >90dB
• Fuse: 30A x 2
• Preamp outputs
• Bass Boost: 0-9 dB
• THD:  <0.05%
• Variable high-pass filter (60-1200 Hz)
• Variable low-pass filter (30-250 Hz)
  
• Dimensions: 9.84"L x 2.08"W x 9.45"H

Video of RWK41:

Unboxing Video for RWK41:

Authorized Rockville Dealer!

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets