Package Includes:

• Pair MTX TM652WB-B 6.5" 75w RMS! Marine Boat Speakers with Advanced Crossover
• (1) Rockville Dual 6.5" Polished Silver Aluminum Wakeboard Tower Speaker Enclosure
• (1) Rockville DBM25 1400 Watt 2 Channel Marine/Boat Amplifier Amp w/Silicone Covers
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
• Mounting screws
• (2) pieces of foam filler that go into your enclosure if you install these into wakeboard enclosures
• (2) Safety cables for use with wakeboard mounting
• All mounting hardware
• (2) 2.375" rubber inserts
• (2) 2.25" rubber inserts
• (2) 2.5" rubber inserts
• (2) 2" rubber inserts
• Birth sheet with Tested Power
• Mounting Screws
• Warranty Card
• Owner’s Manual

---

Includes:

• Pair MTX TM652WB-B 6.5" 75w RMS! Marine Boat Speakers with Advanced Crossover
• Wakeboard installation kit that includes (2) Foam mounting gaskets for an air-tight seal
• Mounting screws
• TMWBA adapter reducer kit which has 8 Rubber mounting adapters for use with wakeboard enclosures
• (2) pieces of foam filler that go into your enclosure if you install these into wakeboard enclosures
• (2) Safety cables for use with wakeboard mounting

Description of TM652WB:

Background:
This is an incredible closeout deal for top of the line marine speakers that have 75w RMS power handling. MTX made a wakeboard model speaker named the TM652WB that retails for $449.95. They had 1,000 pairs of these speakers without the enclosure. We bought the closeout deal from MTX because you can use these as regular coaxial speakers or you can buy them as a bundle with the Rockville MAC65 or DMAC65 enclosures. These even include everything needed to mount them into the wakeboard enclosures. These were engineered with a very high end crossover that is tuned for boat and UTV applications. So this makes it hard to understand the kits.

Features:

• Pair MTX TM652WB-B 6.5" 75w RMS Marine Boat Speakers with Advanced Crossover
• Perfect for use on a boat as a full range speaker with high power handling or you can install them into a wakeboard can
• 75 Watts RMS high power handling each speaker
• 150 Watts peak each speaker
• Huge 20 Oz magnet! (competing speakers have 8-10 Oz magnets)
• Advanced crossover is tuned to throw long distances
• 25mm soft dome tweeter
• Polypropylene woofer cone
• Tested: 500 hours to ASTM B117, D4329 standard
• Impedance: 4 Ohm
• 1.5" oversize voice coils

---

How To Set Up Your DMAC65 and DMAC80 Wakeboard Tower Speaker Pods:

Video of DMAC65:

Includes:

• 1 Double Wakeboard Can
• All Mounting Hardware
• (2) 2.375" Rubber Inserts
• (2) 2.25" Rubber Inserts
• (2) 2.5" Rubber Inserts
• (2) 2" Rubber Inserts

Description:

Rockville is proud to introduce our all new line of aluminum wakeboard cans. The DMAC65S features double pod design which allows you to mount two 6.5" speakers. It includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter. Six precision molded high impact rubber inserts guarantee fitment on towers from 2" to 2.5". Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!

This awesome double pod is built of hand polished super strong aircraft grade 6061 aluminum. It is fully marinized which means it will withstand the elements on the water. This unit is 100% waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!

The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.

Features:

• Rockville DMAC65S polished chrome aluminum double can wakeboard tower enclosure
• Made of high quality 6061 aircraft grade aluminum
• Hand polished for beautiful chrome finish
• 100% waterproof and fully marinized against salt and fresh water conditions
• Internally wired for clean install - no exposed wires or terminals
• High efficiency design features the perfect airspace for 6.5" speakers
• Rugged universal mounting clamps made of 6061 aluminum
• Includes precision molded, high impact plastic inserts for tower fitment from 2" diameter to 2.5" diameter
• Mounting Depth (in inches): 7.4"

---

How To Install a Marine Amplifier onto Your Boat:

Video of DBM25:

What's In The Box:

• (1) DBM25 Amplifier
• Birth sheet with Tested Power
• Mounting Screws
• Warranty Card
• Owner’s Manual

Description:

The all new dB marine series of amplifiers gives you the best of both worlds! We took the sound of our best selling series of dB car amps and we added the best marine grade parts so that they will last forever and withstand even the harshest conditions on the water.

We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, all of the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!

The DBM25 is a 2-Channel amplifier with 1,500 watts peak output and 375 watts Dyno Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The DBM25 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected, we will send you a pre-paid shipping label and give your money back. This means that, if for any reason you want to return the amplifier for a full refund within 90 days, you can! (Amp must be complete along with the box).

Features:

• Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  
  • 2 Ohm: 185 Watts x 2 Channel
  • 4 Ohm: 125 Watts x 2 Channel
  • 4 Ohm Bridged: 370 Watts x 1 Channel
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  • 2 Ohm: 750 Watts x 2 Channel
  • 4 Ohm: 500 Watts x 2 Channel
  • 4 Ohm Bridged: 1500 Watts x 1 Channel
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Adjustable Low Pass Filter: 50Hz - 250Hz
• Adjustable High Pass Filter: 60Hz - 1.2kHz
• Fully Adjustable 12dB Bass Equalizer
• Adjustable Input Level Control
• Minimum THD at Rated Power: <0.05%
• S/N Ratio: >90 dB
• Frequency Response: 10Hz - 50kHz
• Damping Factor: >100 @ 100Hz
• (2) 25 Amp ATC Fuses
• Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
• Waterproof silicone covers for end panels
• Rustproof Aluminum heat sink with white paintedfinish
• Stainless steel end panels are rustproof
• All screws and mounting hardware are stainless steel and rustproof
• Bottom panel is aluminum and rustproof
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Product Dimensions (W x H x L): 9" x 2.4" x 15.1" inches
• Product Weight: 7.7 Lbs

---

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25' Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties