- (1) Alpine SWR-8D4 8" Inch 1000 Watt Dual 4 Ohm Type-R Car Subwoofer
- (1) Rockford Fosgate Punch P300X1 300w RMS Mono Car Audio Amplifier
- (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA
Features of SWR-8D4:
- Alpine SWR-8D4 Type-R 1000 Watt 8" Car Subwoofer with dual 4-ohm voice coils
- 1000 Watts Peak Power / 350 Watts RMS
- 4-Layer DVC Winding on Spiral Cut
- Reinforced Parabolic Cone Structure with Poly-Mica Dust Cap & Pulp-Kevlar Cone Body
- High Altitude Multi Roll Santoprene rubber surround
- Progressive Conex® Spider with Reinforced Layer Tinsel Leads
- 38mm High Temperature Voice Coil
- Cast Aluminum Frame With Perimeter Vented Heat Transfer
- Heavy Duty 8 gauge Spring Post Terminals For Pin connection or Single Banana Plugs
Details:
- Power Handling
- CEA-2031 Power Rating: 350 W RMS
- Power Range: 150 W-350 W RMS
- RMS Power Handling: 350 W RMS
- Peak Power Handling: 1000 W PEAK
- Dimensions
- Mounting Depth: 4-1/2''
- Mounting Diameter: 6-15/16''
- Displacement: -0.050 ft3
- Added Volume: +0.035 ft3
- Top-mount depth: 4-1/2"
- Sealed box volume: 0.15-0.50 cu. ft.
- Vented box volume: 0.25-0.70 cu. ft.
- General
- Frequency Response: 30 Hz-200 Hz
- Sensitivity: 83.5 dB
Features of P300X1:
- Brand New Rockford Fosgate Punch Series P300X1 300 Watt Monoblock Amplifier
- Number of Channels: 1
- Rated Power: (RMS Continuous Power): 200 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm - Total Power (Sum of Rated Power): 300 Watts RMS
- Efficiency (average): TBA% @ 4-Ohm / TBA% @ 2-Ohm
- Crossover Controls: Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth - Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position - Signal Input: Hi/Low level: 2 RCA pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED
Input Clip LED
Output Clip LED - Circuit Topology Class: Class-A/B
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Dimensions (HxWxL): 2.38 x 7.76 x 11.03 (in)
Video of RWK81:
Description:
The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (1) sets of RCA cables.
Features:
- Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
- (1) 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ 8 Gauge Translucent Blue Super Flex Power Cables
- 17’ 18 Gauge Blue Remote Cable
- 17’ 16 Gauge Clear Speaker Wire
- 3’ 8 Gauge Super Flex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Soft abrasion proof insulating jacket allows for 100% improved flexibility
- PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
- UPC:
- 613816027309