Package Includes:

• (1) Bose Sub1 Powered Subwoofer Active Sub Bass Module For L1 Pro32 Line Array
  
• (1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables
  

---

Description:

A powered, portable bass module, the Sub1 subwoofer combines with virtually any portable PA and delivers low-end performance down to 40 Hz. Its unique 7" × 13" high excursion RaceTrack driver allows for an ultraslim enclosure, delivering performance that rivals a traditional 12" woofer without the cumbersome size, freeing up room in your vehicle and on the stage. Compared to the Sub2 subwoofer, Sub1 is the more compact subwoofer option for the Bose L1 Pro32 system, combining seamlessly via single-cable SubMatch connectivity.You can stack multiple Sub1 subwoofers for even more low end — or to unleash Cardioid Mode for directional bass. With a Sub1, you get a subwoofer that goes virtually anywhere and effortlessly fills out your sound.

Features:

• Add powerful bass to your portable PA system with low-end range down to 40 Hz
  
• Go from vehicle to venue easily with a slim design featuring a unique 7" × 13" high-excursion RaceTrack driver; performance that rivals a conventional 12" woofer with a smaller footprint
  
• Stack multiple Sub1 subwoofers for even more bass or unleash Cardioid Mode for focused, directional performance that steers the bass out front and decreases feedback
  
• Combine seamlessly with Bose L1 Pro32 portable line array via proprietary SubMatch connectivity, which delivers both power and audio over a single cable
  
• Pair with other powered loudspeakers via line input and output with selectable crossover modes, plus integrated threaded pole mount for use with Bose S1 Pro PA and more
  

Specifications:

• System Type: Self-powered bass module
  
• Frequency Response (–3 dB): 40 Hz to 180 Hz
  
• Frequency Range (–10 dB): 32 Hz to 250 Hz
  
• Nominal Vertical Coverage Pattern: 0°
  
• Nominal Horizontal Coverage Pattern: Omnidirectional (with –10 dB rear rejection in Cardioid mode)
  
• Calculated Maximum SPL @ 1 m, continuous: 118.6 dB
  
• Calculated Maximum SPL @ 1 m, peak: 124.6 dB
  
• Crossover: 200 Hz
  

Transducers

• Low Frequency: 1 × RaceTrack low-frequency driver 7" × 13"
  
• Low Frequency Voice Coil Size: 2"
  
• Driver Protection: Dynamic limiting
  

Amplification

• Type: Class D
  
• Low Frequency Amplifier Channel: 480 W
  
• Cooling: Convection cooling
  

Onboard Mixer

• Channels: Two
  
• Channel 1 & 2 Input: Audio Type: Combination XLR or 1/4" TRS connector (mic/instrument/line)
  
• Channel 1 & 2 Input: Impedance: 100 KΩ
  
• Channel 1 & 2 Input: Channel Gain: +10 dB to +45 dB; from input to driver, controlled by volume control
  
• Channel 1 & 2 Input: Max Input Signal: +24 dBu
  
• Channel 1 & 2 Output: Audio Type: XLR connector, line-level, full-frequency bandwidth
  
• SubMatch Input: Audio Type: Bose proprietary multi-pin cable
  
• SubMatch Thruput: Audio Type: Bose proprietary multi-pin cable
  
• LED Indicators: Standby, Phase/Pattern selection, Input EQ selection, Output EQ selection, Signal/Clip Indicator
  

AC Power

• AC Power Input: 100–240 VAC (±20%, 50/60 Hz)
  
• Input: Electrical Type: IEC, SubMatch
  
• Initial turn on inrush current: 14.9 A at 120 V; 29.3 A at 230 V
  
• Inrush current after AC mains interruption of 5: 5.8 A at 120 V; 32.0 A at 230 V
  

Enclosure

• Color: Black
  
• Enclosures Material: High-impact polypropylene, birch plywood
  
• Grille Material: Powder-coated perforated steel
  
• Product Dimensions (H × W × D): 533 × 260 × 529 mm (21.0 × 10.2 × 20.8 in)
  
• Shipping Dimensions (H × W × D): 620 × 620 × 330 mm (24.41 × 24.41 × 12.99 in)
  
• Net Weight: 15.5 kg (34.1 lbs)
  
• Shipping Weight: 18.0 kg (39.6 lbs)
  
• Warranty Period: 2 years
  
• Included Accessories: IEC power cord, slip cover
  
• Optional Accessories: Sub1 Roller Bag, Adjustable Speaker Pole, SubMatch Cable
  

Product Part Numbers

• 840918-1100: SUB1 POWERED BASS MODULE,120V,US
  
• 840918-2100: SUB1 POWERED BASS MODULE,230V,EU
  
• 840918-3100: SUB1 POWERED BASS MODULE,100V,JP
  
• 840918-4100: SUB1 POWERED BASS MODULE,230V,UK
  
• 840918-5100: SUB1 POWERED BASS MODULE,230V,AU
  
• 840918-5130: SUB1 POWERED BASS MODULE,230V,INDIA
  
• 856985-0110: PREMIUM ROLLER BAG,SUB1,BLACK
  
• 857172-0110: SUBMATCH CABLE,BLACK
  
• 857000-0110: SPEAKER STAND,SUB POLE,BLACK
  

Connections and Controls:

• Standby Button:
  Press the button to power on the Sub. The LED will illuminate white while the Sub is on.
  
• Line Inputs:
  Analog input for connecting an L1 Pro or other line-level audio source. Compatible with XLR, TRS balanced, and TS unbalanced cables.
  
• Line Outputs:
  Use an XLR cable to connect the line-level output to a loudspeaker.
  
• SubMatch Thruput:
  Connect an additional Sub bass module with a SubMatch cable. Up to two Sub1 or Sub2 powered bass modules can be powered by a single L1 Pro32 via Sub Match connection.
  
• Power Input Cover:
  Prevents simultaneous use of the SubMatch Input and Power Input. Slide the cover to reveal the power input that is needed for setup.
  
• SubMatch Input:
  Connect the Sub to an L1 Pro32 with a SubMatch cable.
  
• Power Input:
  IEC power cord connection.
  
• USB Port:
  USB-C connector for Bose service use and firmware updates. Note: This port is not compatible with Thunderbolt 3 cables.
  
• Line Output EQ:
  Select between FULL bandwidth or a multi-purpose HPF when using Line Outputs. Press the button to switch EQ settings. The corresponding LED will illuminate white while selected.
  
• Line Input EQ:
  Select between an optimized EQ for an L1 Pro or a multipurpose LPF when using Line Inputs. Press the button to switch EQ settings.The corresponding LED will illuminate white while selected.
  
• Signal/Clip Indicator: 
  The LED will illuminate green when a signal is present and will illuminate red when the signal is clipping or the Sub is entering limiting. Reduce the level or signal volume to prevent signal clipping or limiting.
  
• Level Control:
  Adjust the level of audio output. The Level Control does not affect the Line Outputs. The 12 o’clock position is recommended when in use with an L1 Pro32.
  
• Phase/Pattern Button:
  Adjust the polarity of the Sub. Press the button to switch polarity. The corresponding LED will illuminate white while selected. Also allows access to Cardioid mode when using two identical Sub modules.

---

How to Set Up RMC-XLR:

Video of RMC-XLR:

Description:

The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.

You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.

90 Day Money Back Guarantee including return shipping!

If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please.

What's Included:

• Fully metal wired mic
• (2) 100% OFC Copper Mic cables (XLR to ¼” + XLR to XLR )
• Mic clip
• Plastic carry case
• Owner’s manual
• Warranty

Features:

• Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!

Mic Features:

• M-56 Cartridge
• Full metal mic body
• Type: dynamic
• Neodymium magnet
• Polar Pattern: uni-directional
• Frequency Response: 80 - 13Khz
• Impedance: 600 Ohms ± 30%
• Sensitivity: -72 ± 3dB

Case Features:

• High quality plastic carry case protects the mic during transportation
• Comfortably holds microphone and mic cable

Cable Features:

• XLR to ¼” Cable
• XLR to XLR Cable
• 10 Feet each
• 100% OFC oxygen free copper
• Cable delivers crystal clear distortion free signal
• Cable is 5 MM thick with cover (22 AWG standard mic cable)
• XLR cable connectors are very solid and durable

Mic clip Features:

• Heavy Duty Standard Size Microphone Clip
• Stand Mountable
• Solid Plastic Construction with copper inside (part that screws to the mic)
• Black Color

Owner’s Manual

---