- (1) Stanton STR8.150 M2 Direct Drive DJ Turntable w/Ultra High-Torque Straight-arm
- (1) ProX T-TTBL Turntable Case 4 Numark/Stanton/Technics/Pioneer PLX1000 Turntables
- (1) Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables
Authorized Stanton Dealer
Description of STR8150M2:
In creating the STR8.150 M2 turntables, Stanton went back to basics while re-engineering these turntables from the ground up. With everything professional DJs need—and nothing they don’t—the ST.150 M2 (standard S-shaped tone arm) and STR8.150 M2 (“skip-proof” straight tone arm) are built to the highest possible standards. Both models offer feedback-resistant, durable construction with industry leading torque motors—up to 4.5 Kgf-cm, complemented by an ultra-stable platter and tone arm. With additional features including reverse and up to 50% pitch adjustment, the ST.150 M2 and STR8.150 M2 turntables combine 21st century innovation with Stanton’s 70-year legacy of excellence.
Features:
- Stanton STR8.150 M2 Direct Drive DJ Turntable w/Ultra High-Torque Straight-Arm
- Direct drive turntable featuring motor torque up to 4.5kg
- Heavy-duty aluminum construction, with very low resonance base
- 22.5 lbs/ 10.2 kg
- Straight tone arm with height fine adjust
- Ultra stable, damped platter
- Adjustable brake speed
- Selectable pitch control [8, 25 & 50% range] with Quartz Lock
- Speed 33, 45 and 78 including Reverse
- Removable target light and adjustable shock-absorption feet
- Selectable Phono or Line RCA Outputs
- Slip mat, 45 adapter, and right-angled cable included
- Cartridge not included
- Full version of Deckadance DVS Software included
- Starting Torque More than 4.5kgf-cm
- Motor Direct Drive/16pole, 3phase, brushless DC motor
- Turntable Platter 332 mm diameter Aluminum die-cast
- Pitch Controls +/-8%, +/-25%, +/-50%
- Wow & Flutter Less than 0.1% WRMS (JIS WTD) with 33 1/3rpm
- Braking System Electronic brake
- S/N Ratio More than 60dB (DIN-B)
- Channel Separation More than 15 dB
- Tone Arm Section Measurement
- Tone arm type Static balanced tone arm with Cardan's suspension and detachable headshell
- Effective Arm Length 194mm
- Tracking Force Range 0-3g
- Applicable Cartridge Weight 13-18g
- Channel Balance Within 2.5dB at 1 KHz
- Needle Pressure range 2-5g
Click here for the Quick Start Guide
Video T-TTBL:
The T-TTBL Turntable Case is a must have item to efficiently protect and store your valuable DJ turntables.
Pro X T-TTBL ATA Case holds: Numark, Stanton & Technics 1200 style Turntable Cases. This fits any standard size turntables. To see if this fits your turntables, you can contact us or simply make sure your turntable measures less than 17" x 21" x 9.25".
Features:
- Grooved Aluminum Extrusion
- Plastic Laminate
- Recessed Spring-Loaded Handle
- Recessed Butterfly Twist Latches
- Padlocks Included
- Stacking Ball Corners
- 3/8" Plywood Construction
- Adjustable foam to ensure right fit
- Black on Black Design
Specifications:
- Interior Width: 17.75" - 15"
- Interior Depth: 15"- 13.5"
- Shipping dimensions (exterior): 19" x 23" x 11"
- Dimensions (exterior): 20" x 16" x 9"
- Shipping weight: 26 lbs
- Weight: 16 lbs
Includes:
- DJ1500 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼” adapter
Video of DJ1500:
Description:
Rockville brings you Pro quality DJ headphones at an incredible price with its new DJ1500. These headphones are tailor made to meet the demanding needs of today’s DJs. The DJ1500 features large over-the-ear swiveling cups with superbly comfortable foam ear pads (interchangeable soft suede or leather finish cushions included) that seal tight around the ear for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering an extended frequency range and incredible bass response. You’ll hear pronounced vocals; rich, deep bass, rich mids, and crisp highs that will make mixing tracks a breeze. We’ve also incorporated exclusive sound isolation technology which helps to greatly reduce background noise.
The DJ1500 features a clean modern look with ergonomically designed ear cups that swivel 45° up and can flip around 180°. The headband is made of soft supple leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. Improved rugged swivel joints can withstand the rigors of daily use and provide years of carefree use. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. We also provide a hard leather case to store and protect your new investment when you are on the go.
With deep bass response, optimal sound reproduction, and a sleek modern design the DJ1500 will quickly become your first choice whether spinning wax at the club or practicing your mixing techniques at home.
Features:
- Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional DJ Headphones
- 40mm Neodymium drivers
- Ergonomically designed large over-the-ear swivel cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 47” coil cable made of 100% Oxygen Free Copper (158” fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼” adapter
- Hard leather carrying case
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 100±3dB
- Impedance: 32ohm
- Frequency Response: 8Hz – 22KHz
- Max. Power: 800MW
- Rating Power: 400MW
- Net Weight: 290g (with cable)
How to Set Up RMC-XLR:
Video of RMC-XLR:
The
Rockville RMC-XLR is the same exact microphone we use in our Pro Mic
Kit 1 microphone/stand bundle. This mic was created because we saw a
need in the market for a high quality microphone at an affordable
price. We found there were a lot of good mics around from reputable
brands that sound great, but are very expensive. When we looked at the
cheaper mics on the market from both reputable and entry level brands;
we were not impressed at all. As a result we sent our very own product
developers on a mic testing journey. A lot of our employees here at
Rockville love to do karaoke, so it was not long before we found a mic
that we all loved.
You may be asking yourselves, so what makes this mic sound so good?
There are 3 main components that make a mic sound the way it does. The
cartridge, the magnet, and the mic cable. Our mic uses an M-56
cartridge which has a neodymium magnet. This combination of components
supplies better sensitivity; which means your mouth will not have to
be on the mic for it to pick up the sound. Our components supply more
than a great pickup pattern. They have very little background noise,
and great tone.
We pay a lot of attention to detail. We could have saved a lot of
money and got our cost down by including a cheap cable, but we know
how important the cable is. We are very passionate about our products
and we really have a lot of respect for our customers. For this reason
alone we included 100 % OFC copper cables. There is no aluminum in
this cable! It is Pure oxygen free copper. What this means is that the
cable will last longer and will sound a lot better. You will get a
distortion free signal. We use a true gauge mic cable with proper
thickness.
The body of the microphone is also something we paid a lot of
attention too. We did not want it to be too light and feel cheap. We
made a nice solid metal microphone. It has a great feel to it. We
could have gone with plastic or cheaper metal, but we wanted to go
with a mic that we ourselves would want to use.
90 Day Money Back Guarantee including return shipping!
If
within the first 90 days you are not 100 % satisfied for any reason,
contact us and we will send you a return label and give you all your
money back! (Item must be returned complete with all accessories and
the original box please).
What's Included:
- Fully
metal wired mic
- (2) 100% OFC Copper Mic
cables (XLR to ¼” + XLR to XLR )
- Mic
clip
- Plastic
carry case
- Owner’s
manual
- Warranty
Features:
- Rockville RMC-XLR High-End Metal
Handheld Wired Microphone Mic Amazing Sound!
- Mic
Features:
- M-56
Cartridge
- Full
metal mic body
- Type:
dynamic
- Neodymium
magnet
- Polar
Pattern: uni-directional
- Frequency
Response: 80 - 13Khz
- Impedance:
600 Ohms ± 30%
- Sensitivity:
-72 ± 3dB
- Case
Features:
- High
quality plastic carry case protects the mic during transportation
- Comfortably
holds microphone and mic cable
- Cable
Features:
- XLR to ¼” Cable
- XLR to XLR Cable
- 10
Feet each
- 100%
OFC oxygen free copper
- Cable
delivers crystal clear distortion free signal
- Cable
is 5 MM thick with cover (22 AWG standard mic cable)
- XLR
cable connectors are very solid and durable
- Mic
clip Features:
- Heavy
Duty Standard Size Microphone Clip
- Stand
Mountable
- Solid
Plastic Construction with copper inside (part that screws to the
mic)
- Black Color
- UPC:
- 613815866022
