Package Includes:

• (1) SoundStorm SLR8DVC 1000 Watt 8" DUAL 4-Ohm DVC Car Audio Subwoofer Sub
• (1) Boss Riot R1100M 1100 Watt Mono Car Audio Power Amplifier Amp + Sub Bass Remote
• (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
• (1) Rockville RSE8 Single 8" 0.55 cu. ft. MDF Sealed Car Sub Box Subwoofer Enclosure
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

---

Description of SLR8DVC:

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. The 'break-in' process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Cone: Polypropylene

Commonly called just PP, this plastic has various forms. It is a resilient and durable manufactured material that can be used in thousands of applications across virtually all fields. It can be used for tubes, car trims, and bags. In the specific case of our cones, this material allows for maximum give that produces great sounding speakers lasting you a long, long time.

Surround: Butyl Rubber

Butyl Rubber is a synthetic (man-made) rubber and is valued for its chemical inertness, impermeability to air and the ability to endure or resist exposure to the many types of weather fronts. Butyl rubber has many different applications. Anywhere from Sports equipment to automotive parts, the medical industry and more. We use them for the Surrounds that connect the cone to the basket. Did you know that most modern chewing gum uses food-grade butyl rubber as the central gum base, which contributes not only the gum's elasticity but an obstinate, sticky quality? Just like that chewing gum, the Butyl Rubber Surround in our speakers can take the equivalent amount of abuse without quitting on you.

Basket: Stamped

Here are a couple of advantages of die-casting over stamping speaker frames. One of the more noticeable differences is the fact that a die-cast frame has better Resonant Frequencies. This means that the frame is able to absorb and transfer much of the energy produced by the speaker. It doesn’t vibrate like a bell would when it is stricken. Another advantage is that a die-cast frame is more durable and harder to damage or break. Other advantages are high dimensional stability for complex shapes, good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures.

Features:

• SoundStorm SLR8DVC 1000 Watt 8" DUAL 4-Ohm DVC Car Audio Subwoofer Sub
• 8 inch 1000 Watt Dual Voice Coil Subwoofer
• Power Handling (Peak): 1000 Watts
• Impedance: Dual 4 Ohms
• Resonant Frequency: 44.8 Hz
• Sensitivity (1 Watt/1 Meter): 83 dB
• Cone: Polypropylene
• Voice Coil: 1.5" Copper
• Terminal Type: Push
• Basket: Stamped
• Surround: Rubber
• Insulated Lead Wires
• Dimensions: L 9.3" x W 9.3" x H 4.8"
• Mounting Depth: 4.2"
• RMS: 500watts
• Polypropylene cone
• 2" copper voice coil
• Top-mount depth: 4.1875"
• Cutout diameter: 7"
• Sensitivity: 83dB
• Resonance Frequency (Fs): 44.8
• Recommended Enclosure Specifications
• Recommended Enclosure Type Ported / Vented
• Sealed
• Optimum Sealed Box Volume .35 cubic feet
• Optimum Ported Box Volume .65 cubic feet

---

Authorized Boss Internet Retailer!

Features:

• Boss Riot R1100M Car Audio Power Amplifier + Sub Bass Remote
• Total Power: 1100 Watts
• Max Power @ 2 Ohms: 1100 Watts x 1 Channel
• Max Bridged Power @ 4 Ohms: 250 Watts x 1 Channel
• Soft Turn-On Circuit
• Power & Protection LEDs
• Thermal Overload & Speaker's Short Protection
• Remote Subwoofer Level Control
• Amplifier Class: Class A/B
• Number of Output Channels: 1
• Total Harmonic Distortion (THD) @ RMS Output: 0.01%
• Signal-to-Noise Ratio (SNR): 105 dB
• Speaker Impedance: 2 Ohms
• Dimensions: 2.25" x 9.125" x 10.4375"

---

Advantages of buying from an authorized seller:

Please note: If you purchase Boss from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

---

Video of RWK10:

The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing.  The resistance per foot of this kit is extremely low compared to any other amp kit in its range.  The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit.  We were more shocked than anyone about these tests, because we used to sell some of those amp kits.  (We now will not sell those any more after learning that they are not up to the quality standards of our installers). The conclusion is that Rockville does a great job manufacturing amp kits while other brands are deceiving consumers.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (1) set of RCA cables.

Features:

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• (1)  17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 10 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3' 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 40 Amp ATU Inline Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

---

 

Authorized Rockville Dealer!

Features:

• Rockville RSE8 Single 8" 0.55 cu. ft. MDF Sealed Car Sub Box Subwoofer Enclosure 
• Single 8" Sealed Compact
  
• 5/8" MDF
• Compact Design
• Durable Black Carpet
• Air Space: 0.55 Cubic Feet
• Mounting Depth: 6"
• Height: 10"
• Width: 12"
• Depth: 8"

 

---

About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.

 

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.