Description of SBV-10-WRA:

Delivers deep, impactful bass with your top on or off. Caught on the trail in the rain with the top off? The SBV-10-WRA is weather resistant so your adventure can continue.

Smart Use Of Space With Easy Installation

When you have a Wrangler, you don’t have extra space to spare. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger’s seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet)

Wrangler-Ready Bass

Enjoy impactful bass, with your Wrangler’s top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger’s foot well to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends.

Features:

• Alpine Loaded 10" Weather Proof Subwoofer For 2011-2018 Jeep Wrangler JK 4-Door
• 10" subwoofer Pre-loaded into a sealed, custom-fit enclosure
• Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required
• Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction
• OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness
• Nominal Impedance: 2 ohm
• Frequency Response: 45-200Hz
• The 300W RMS/900W max power rating is a match for the KTA-30MW Mono Tough Power Pack Amplifiers

All About RKL65MBW:

How To Install Kick Panel Speaker Pods In A UTV:

Includes:

• Pair of 6.5" Marine LED Speakers
• 16.4 feet of Speaker Wire
• Stainless Steel Mounting Screws
• Black and White Grills Included

Features:

• Pair Rockville RKL65MBW 6.5" 2-Way 700 Watt Marine Boat Speakers with LED Lights
• CEA Compliant Power Ratings
• True Coax Design With the Tweeter Completely Separated From the Cone
• Larger Cone Surface Area Gives Better Mids and Lows
• Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
• True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
• Power Rating: 350 Watts Peak/85 Watts RMS Per Speaker
• Total Power: 700 Watts
• Beat sync LED's flash to the rhythm of the music
• You can select either red or blue color LED's on the wire harness
• No extra installation for the LED. It gets a power signal through your speaker wire
• The louder the music the more intense the LED's flash
• Black and White detachable Grills
• Fully Marinized Against Salt & Fresh Water Conditions
• UV treated cone makes this completely Waterproof and rustproof
• Anti-corrosion Stainless Steel Terminals
• Molded ABS plastic for amazing sound and protection from the elements while out on the water
• Polypropylene Formed Cone
• 10 Oz Y30 top of the line magnet supports high power handling
• Rubber Surround
• High quality ferrite magnet
• 1" inch Polymer Tweeter
• Oversized 1" CCAW Kapton Voice Coil
• Pre-installed Stainless-Steel mounting screws included
• Perfect for Marine, Car, ATV and UTV applications
• Impedance: 4-Ohm
• Frequency Response: 35Hz - 20KHz
• Sound Pressure Level: 90dB @ 1w/1m
• Total Diameter: 7.3"
• Cutout Diameter: 5.6"
• Total Height: 3.86"
• Mounting Depth: 2.56"

Description of KTA-30MW:

PRODUCT OVERVIEW
With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys.

A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys.

This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycles saddlebags.

A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.

DYNAMIC PEAK POWER
The KTA-30MW features Alpine’s exclusive Dynamic Peak Power (D.P.P.) technology which intelligently adjusts the gain to automatically adapt to musical needs. D.P.P. prevents the amplifier from clipping music signals by supplying up to double the power to support power hungry, rhythmic peaks like a snare drums, trumpets, or high-hat cymbals.

During these dynamic musical passages, D.P.P. instantly delivers bursts of power to rise to the peak demands of the music and very quickly rolls back down to maintain its efficiency.

WEATHER RESISTANT FORMAT
The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection again dust ingress and high-pressure water spray. Its rugged chassis and high-quality waterproof connector can be used in installations where it will be exposed to the outdoor elements.

HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.

Specifications:

• ALPINE KTA-30MW 600 Watt Mono Amplifier Class-D Amp For Polaris RZR/ATV/UTV/Cart
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• CTA-2006-B Specifications: 300W RMS x 1 (2O/4O, 14.4V, = 1% THD+N)
• 600W x 1 Peak (2O/4O, 14.4V, = 1% THD+N)
• 83dB S/N (ref. 1W into 4O)
• =0.1% THD+N
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
• Sound control
• Crossovers: Variable Low Pass filter 50-400Hz @ -24dB/Oct.
• Input gain settings (variable)
• 2ch/4ch input (selectable)

Video of MAC65B:

Includes:

• 2 Wakeboard Cans
  
• All mounting hardware
  
• (2) 2.375” rubber inserts
  
• (2) 2.25” rubber inserts
  
• (2) 2.5” rubber inserts
  
• (2) 2” rubber inserts
  

Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65B comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter.  Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!

These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC65B features a black powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading.  They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!

The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.

Features:

• Pair of Rockville MAC65B black aluminum can wakeboard tower enclosures
  
• Made of high quality 6061 aircraft grade aluminum
  
• Beautiful black powder-coat finish
  
• 100% waterproof and fully marinized against salt and fresh water conditions
  
• Internally wired for clean install—no exposed wires or terminals
  
• High efficiency design features the perfect airspace for 6.5” speakers
  
• Rugged universal mounting clamps made of 6061 aluminum
  
• Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
• Mounting Depth - 6.7"
• Total Depth - 9.15"
• Cutout - 5.55"
• Diameter - 7.39".
• Mounting diameter - 6.4" (Narrow diameter - 6.12")
• Height of mount - 3.75"
• Total height of unit - 11"

*Although the pre-drilled holes will accommodate most speakers on the market, there may be some that don't fit. If that is the case you can drill holes into the lip of the can to line up with your speaker's mounting holes.????

??