Videos of RXM-T2:

Authorized Rockville Dealer!

The RXM-T2 is part of the Rockville proton series. This is one of the most durable marine amps in the world. It is completely water resistant! It is protected from rain, moisture, splashing, heat, cold, saltwater, vibrations, the sun, and anything else you will throw at it! The small footprint makes this durable so you can mount the amplifier even in the tightest locations. The other thing that makes this amp so durable is that it is a class "D" power supply. So even if you run it at a really low impedance the amplifier can handle it! The amp is efficient and does not generate a ton of heat. So even if you abuse the amplifier and run it at 1 ohm load in stereo mode or a 2 ohm load in bridged mode; the amplifier will handle it! (We tested it).

Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers' capability! If you are using this amplifier for 2 or 4 full range speakers, then please install with the gain level down all the way and then crank it up very slowly to protect your speakers from blowing. The reason we created this amplifier with so much power capability is for 2 reasons. One reason is to make it capable for powering lots of speakers per channel. Secondly was to give you enough headroom on the amplifier so you do not have to crank the gain all the way up all the time. This headroom ultimately will increase the sound quality like crazy!

The RXM-T2 is rated at 1200w RMS, but we totally underrated these! We just got test reports back from our QC department showing this amp outputting a legitimate 1600w RMS when bridged! This amp performs at 600 x 2 @ 2 ohms RMS and when you bridge it you get 1600 x 1 @ 4 ohms! (To get even more power you can run it at 1 ohm in stereo mode and 2 ohm in bridged mode). This is a full range class "D" amplifier. It is super-efficient. The ratings are more than legit. They are actually under-rated.. This amp is CEA compliant. I invite you to test them and write a review when you are done testing.

We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and give you all your money back!

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXM-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs.

I wanted to take a second and talk about the waterproofing process we use on this amplifier. We use a chemical compound which includes Acrylate Acid, Silicone, Polyurethane, and a few other substances. When these chemicals solidify, it becomes a protective on the PCB. This is what we call a conformal coating. This makes the amplifier water resistant. It also prevents oxidization and protects the amplifier from moisture. There are 3 ways manufacturers can conformally coat a PCB board. Soak, paint, or spray.  Once we finish building the PCB board we paint it with our conformal coating.

There is really no amplifier on the market that sounds this good and has this much output power at this price point.

Features:

• Rockville RXM-T2 Micro Class D Marine Amplifier
• Full-Range Class D Amplifier Architecture
• CEA Compliant Power Ratings:
• 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
• 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
• 1600 Watts (1 x 1600 Watts) bridged @ 4 Ohms < 1% THD
• Peak Power Ratings: 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
• Fully marine grade amplifier with conformal-coated PCB board
• Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
• Double Sided Surface Mount (SMD) PCB Design
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• RCA Preamp Line Output
• Status Mode LED Indicator
• 8 Volt Preamp Circuitry
• 4 Gauge Lucite Encapsulated Power/Ground Terminals
• 12 Gauge Lucite Encapsulated Speaker Terminals
• Fully Adjustable 12dB / Octave Crossover
• Low Pass 50Hz - 250Hz
• High Pass 50Hz - 250Hz
• Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
• Minimum THD at Rated Power: < 0.05%
• Frequency Response: 15Hz - 20KHz
• S / N Ratio: 100dB
• S/N Ratio: >97dB
• Damping Factor: > 200 @ 100Hz
• 3 x 35 Amp Fuses
• Dimensions: (W x H x L) 6.7˝ x 1.98˝ x 12.25˝

Owner’s Manual

---

The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!