- (1) Pair of Rockville RWB65B 6.5" Black 2 Way 250 Watt Marine Wakeboard Tower Speakers
- (1) Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier
- (1) KICKER 43PXBTC Weather Proof Bluetooth Controller Polaris RZR/ATV/UTV/Cart PXBTC
HOW TO RWB SERIES (RWB65B, RWB65W, RWB70B, RWB70W, RWB80B, RWB80W, RWB90W, RWB90B):
Video of RWB65B:
- No exaggerated power ratings : These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 150 watts RMS and 250 watts peak. (150 watts RMS is equal to about 400 watts rated by other brands)
- New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
- Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
- These can withstand all elements on the water for a lifetime of worry free use
- The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.
Features:
- Rockville RWB65B Pair of 6.5" WakeBoard Tower Speakers Totaling 500 Watts (250 Watts per speaker)
- Color : Black
- 6.5" Two-Way High Fidelity Speaker System
- Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
- Includes Stainless Steel Mounting Hardware
- 1" Polymide Dome Neodymium Midrange Tweeter
- Built-In Two-Way Crossover Network
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Water / Rust Resistant
- Terminals Are Sealed with Rubber Gaskets
- Specially Tuned for PA Voice Over
- Polypropylene Mica Injected Cone with Santoprene Surround
- High BL Magnet Motor Structure
- Y30 High Density Magnets
- Oversized 1.25” Kapton Voice Coil
- Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage
- These Wakeboards Fit bars ranging from 1.26 inches to 2.05 inches and can even fit larger Bars with our optional longer screws
- Includes long screws that accommodate Jeep Wrangler and any roll bar
- Includes Stainless mounting hardware that wont rust or corrode
Details:
- Power Rating :
- Peak Power Handling : 500 Watts (250 Watts per Speaker)
- RMS Power Handling : 300 Watts (150 Watts per Speaker)
- Frequency Response : 70 – 20,000 Hz
- Sound Pressure Level : 96dB @ 1w/1m
- Impedance : 4 Ohms
- Mounting Depth : 9"
Includes:
- (2) Wakeboard Speakers
- Mounting Brackets
- Integrated Grill
- Installation Hardware
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
Videos of RXM-T2:
Description:
The RXM-T2 is part of the Rockville proton series. This is one of the most durable marine amps in the world. It is completely water resistant! It is protected from rain, moisture, splashing, heat, cold, saltwater, vibrations, the sun, and anything else you will throw at it! The small footprint makes this durable so you can mount the amplifier even in the tightest locations. The other thing that makes this amp so durable is that it is a class "D" power supply. So even if you run it at a really low impedance the amplifier can handle it!
Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers' capability! If you are using this amplifier for 2 or 4 full range speakers, then please install with the gain level down all the way and then crank it up very slowly to protect your speakers from blowing. The reason we created this amplifier with so much power capability is for 2 reasons. One reason is to make it capable for powering lots of speakers per channel. Secondly was to give you enough headroom on the amplifier so you do not have to crank the gain all the way up all the time. This headroom ultimately will increase the sound quality like crazy!
The RXM-T2 is rated at 1200w RMS; Dyno Certified RMS Power Ratings! This amp performs at 600 x 2 @ 2 ohms and when you bridge it you get 1200 x 1 @ 4 ohms! This is a full range class "D" amplifier. It is super-efficient. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and give you all your money back!
One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXM-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs.
I wanted to take a second and talk about the waterproofing process we use on this amplifier. We use a chemical compound which includes Acrylate Acid, Silicone, Polyurethane, and a few other substances. When these chemicals solidify, it becomes a protective on the PCB. This is what we call a conformal coating. This makes the amplifier water resistant. It also prevents oxidization and protects the amplifier from moisture. There are 3 ways manufacturers can conformally coat a PCB board. Soak, paint, or spray. Once we finish building the PCB board we paint it with our conformal coating.
There is really no amplifier on the market that sounds this good and has this much output power at this price point.
Features:
- Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier
- Full-Range Class D Amplifier Architecture
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
- 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
- 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
- Fully marine grade amplifier with conformal-coated PCB board
- Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
- Double Sided Surface Mount (SMD) PCB Design
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- RCA Preamp Line Output
- Status Mode LED Indicator
- 8 Volt Preamp Circuitry
- 4 Gauge Lucite Encapsulated Power/Ground Terminals
- 12 Gauge Lucite Encapsulated Speaker Terminals
- Fully Adjustable 12dB / Octave Crossover
- Low Pass 50Hz - 250Hz
- High Pass 50Hz - 250Hz
- Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
- Minimum THD at Rated Power: < 0.05%
- Frequency Response: 15Hz - 20KHz
- S / N Ratio: 100dB
- S/N Ratio: >97dB
- Damping Factor: > 200 @ 100Hz
- 3 x 35 Amp Fuses
- Dimensions: (W x H x L) 6.7" x 1.98" x 12.25"
Description of 43PXBTC:
Add Bluetooth to any audio system with this simple, weatherproof controller. Built as tough as the trails you ride, the 43PXBTC makes it easy to change source, volume or track at any speed – on any terrain.
Get the control you need on the trails you love! Equipped with a stereo RCA output and 3.5mm AUX input, the 43PXBTC Bluetooth Controller automatically pairs with your phone and mutes the music for incoming calls.
Features:
- KICKER 43PXBTC Bluetooth Interface & Controller PXBTC
- Frequency Response: (-3db): 20Hz-20KHz
- THD (250mV 1kHz, AUX input, 2.5V output): <0.01%
- S/N Ratio (AU-Weight) ref 5V, minimum volume: >100dB
- 3.5mm Stereo Aux Input sensitivity: 500mV
- RCA Output Voltage – Max. (1kHz input, 1% THD): 5V
- Total Mounting Depth: 2-9/16 inch (65 mm)
- Protrusion from Mounting Surface: 5/8 inch (16 mm)
- UPC:
- 613815939382
