- (1) Pair of Rockville RWB65B 6.5" Black 2 Way 250 Watt Marine Wakeboard Tower Speakers
- (1) Rockville RXD-F20 Micro Car/ATV Amplifier 1600w Peak 4 Channel 4x100W/CEA Rated
- (1) KICKER 43PXBTC Weather Proof Bluetooth Controller Polaris RZR/ATV/UTV/Cart PXBTC
HOW TO RWB SERIES (RWB65B, RWB65W, RWB70B, RWB70W, RWB80B, RWB80W, RWB90W, RWB90B):
Video of RWB65B:
- No exaggerated power ratings : These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 150 watts RMS and 250 watts peak. (150 watts RMS is equal to about 400 watts rated by other brands)
- New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
- Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
- These can withstand all elements on the water for a lifetime of worry free use
- The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.
Features:
- Rockville RWB65B Pair of 6.5" WakeBoard Tower Speakers Totaling 500 Watts (250 Watts per speaker)
- Color : Black
- 6.5" Two-Way High Fidelity Speaker System
- Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
- Includes Stainless Steel Mounting Hardware
- 1" Polymide Dome Neodymium Midrange Tweeter
- Built-In Two-Way Crossover Network
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Water / Rust Resistant
- Terminals Are Sealed with Rubber Gaskets
- Specially Tuned for PA Voice Over
- Polypropylene Mica Injected Cone with Santoprene Surround
- High BL Magnet Motor Structure
- Y30 High Density Magnets
- Oversized 1.25” Kapton Voice Coil
- Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage
- These Wakeboards Fit bars ranging from 1.26 inches to 2.05 inches and can even fit larger Bars with our optional longer screws
- Includes long screws that accommodate Jeep Wrangler and any roll bar
- Includes Stainless mounting hardware that wont rust or corrode
Details:
- Power Rating :
- Peak Power Handling : 500 Watts (250 Watts per Speaker)
- RMS Power Handling : 300 Watts (150 Watts per Speaker)
- Frequency Response : 70 – 20,000 Hz
- Sound Pressure Level : 96dB @ 1w/1m
- Impedance : 4 Ohms
- Mounting Depth : 9"
Includes:
- (2) Wakeboard Speakers
- Mounting Brackets
- Integrated Grill
- Installation Hardware
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
Video of RXD-F20:
Description of RXD-F20:
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Proton amps offer.
The RXD-F20 is a 4 channel amplifier with 1600 Watts peak output and 300 Watts
CEA-2006 rated RMS power. You can also bridge the amplifier and get 2 x 200
Watts RMS @ 4Ohms. Here at Rockville we offer the best value in car audio. We
therefore want to make it easy for you to compare our products to any brands on
the market. The peak rating can be used to compare with brands who use peak
ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be
used to compare with brands who rate their items using the CEA standard such as
Kicker, Rockford, Alpine, etc.
One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXD-F20 features Dual 25 Amp Fuses. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXD-F20 you are getting your money’s worth and then some.
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry.
Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXD-F20 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.
One last point I want to make about this amplifier is efficiency. The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).
Features:
- Rockville RXD-F20 1600 Watt Peak / 800w RMS 4 Channel Car Stereo Amplifier
- CEA Compliant Power Ratings:
.....300 Watts (4 x 75 Watts) @ 4 Ohms and 1% THD+N
.....400 Watts (4 x 100 Watts) @2 Ohms < 1% THD
.....400 Watts (2 x 200 Watts) Bridged @ 4 Ohms < 1% THD
- RMS Power Ratings:
.....800 Watts (4 x 200 Watts RMS) @ 2 Ohms
.....800 Watts (2 x 400 Watts RMS) @ 4 Ohm Bridged
.....600 Watts (4 x 150 Watts RMS) @ 4 Ohms
- Peak Power:
.....1600 Watts (2 x 800 @ 2 Ohms or 1 x 1600 @ 4 Ohms)
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Fully Adjustable High Pass Crossover: 50Hz - 250Hz
- CH1 & CH2 High Pass 50Hz - 250Hz
- CH3 & CH4 Low Pass 50Hz - 250Hz
- CH3 & CH4 High Pass 50Hz - 250Hz
- Selectable +6dB/+12dB Bass Equalizer
- Mute and Delay Soft Start System
- Double Sided Surface Mount (SMD) PCB Design
- Full IC-Controlled Protection Circuitry
- 2 CH / 4 CH Input Mode Switch
- RCA Preamp Line Output
- ELNA Brand Audiophile Capacitors
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- 4 Gauge Lucite Encapsulated Power/Ground Terminals
- 12 Gauge Lucite Encapsulated Speaker Terminals
- Sensitivity: 100dB @ 1w / 1m
- Damping Factor: > 200 @ 100Hz
- Dual 25 Amp Maxi Fuse
- Dimensions: (W x H x L) 6.7"x 1.98" x 10.7"
The Rockville Difference:
Whenever
you see the Rockville shield on a product you know that it has the
stamp of approval. While other companies simply import products from
China, Rockville manufactures the products in China to lower your cost
but do so under American style supervision and quality standards to get
you that USA quality that you want!
Description of 43PXBTC:
Add Bluetooth to any audio system with this simple, weatherproof controller. Built as tough as the trails you ride, the 43PXBTC makes it easy to change source, volume or track at any speed – on any terrain.
Get the control you need on the trails you love! Equipped with a stereo RCA output and 3.5mm AUX input, the 43PXBTC Bluetooth Controller automatically pairs with your phone and mutes the music for incoming calls.
Features:
- KICKER 43PXBTC Bluetooth Interface & Controller PXBTC
- Frequency Response: (-3db): 20Hz-20KHz
- THD (250mV 1kHz, AUX input, 2.5V output): <0.01%
- S/N Ratio (AU-Weight) ref 5V, minimum volume: >100dB
- 3.5mm Stereo Aux Input sensitivity: 500mV
- RCA Output Voltage – Max. (1kHz input, 1% THD): 5V
- Total Mounting Depth: 2-9/16 inch (65 mm)
- Protrusion from Mounting Surface: 5/8 inch (16 mm)
- UPC:
- 613815939375
