Package Includes:

• (1) Pair of Rockville RV65.2K 6.5" Car Speakers 640 Watt/160 Watt RMS
  
• (1) Pair of Rockville RV6.3 6.5" 3-Way Car Speakers 560 Watt/140 Watt RMS
  
• (1) Rockville RXA-F1 1600 Watt Peak/800 Watt RMS 4 Channel Car Amplifier
  
• (1) Rockville RWK42 4 Gauge 4 Chan Car Amp Wire Kit with RCA Cables
  

---

Authorized Rockville Dealer!

Video of RV65.2K:

Description:

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. Our specially formulated Hexbass Cone Technology in combination with our Flexmotion Rubber Surround contribute to the speakers smooth extended response with minimal distortion for accurate reproduction of low end frequencies. The tweeters featured use high temperature PEI domes with neodymium magnets for smooth and extended high frequency sounds while the diffused PEI midranges offer outstanding sound dispersion contributing to the crisp clear midrange tones. The Rockville speakers are designed with superior SPL response so that they will play efficiently with stock head units but are powerful enough and capable of handling nominal amplifier power.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify, loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Rockville RV65.2K 2-Way Component Speaker System
• 6.5" Two-Way High Fidelity Component Speaker System
• Peak Power Rating: 640 Watts per Pair / 320 Watts Each
• CEA Compliant RMS Rating: 160 Watts per Pair / 80 Watts Each
• Hex Base Technology Acrylic Speaker Cone
• Flex Motion Butyl Rubber Surround
• Linear Progressive Conex Spider
• Custom Molded Bullet
• 1" Silk Dome Tweeters with Neodymium Magnet
• Flush, Surface, and Angle Mount Tweeters
• Impedance Matching 12dB Two-Way Crossover Network
• Extended Frequency Response Speakers

Details:

• 30 oz. Magnet Structure Weight
• Impedance: 4 Ohm
• Cutout Diameter: 5.4"
• Mounting Depth: 2.25"
• Frequency Response: 60Hz - 20KHz
• Sensitivity: 91dB @ 1w / 1m
• Includes Complete Pair with Grills, Installation Hardware, and Color Coded Speaker Wire

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

Video of RV6.3:

Description:

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. Our specially formulated Hexbass Cone Technology in combination with our Flexmotion Rubber Surround contribute to the speakers smooth extended response with minimal distortion for accurate reproduction of low end frequencies. The tweeters featured use high temperature PEI domes with neodymium magnets for smooth and extended high frequency sounds while the diffused PEI midranges offer outstanding sound dispersion contributing to the crisp clear midrange tones. The Rockville speakers are designed with superior SPL response so that they will play efficiently with stock head units but are powerful enough and capable of handling nominal amplifier power.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify, loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Rockville RV6.3 3-Way Car Speakers
• Peak Power Rating: 560 Watts per Pair / 280 Watts Each
• CEA Compliant RMS Rating:140 Watts per Pair / 70 Watts Each
• 6.5" Open Basket 3-Way Speaker
• HEX Base Technology Acrylic Speaker Cone
• Flex Motion Butyl Rubber Surround
• Linear Progressive Conex Spider
• 2” PEI Polyamide Neo Dome Mid/Tweeter
• 1” PEI Polyamide Electro Tweeter
• Built-in Capacitor Crossover Network
• Extended Frequency Response Speakers

Details:

• 30 oz. Magnet Structure Weight
• Impedance: 4 Ohm
• Cutout Diameter: 5.4"
• Mounting Depth: 2.25"
• Frequency Response: 60Hz - 20KHz
• Sensitivity: 93dB @ 1w / 1m
• Includes Complete Pair with Grills, Installation Hardware, and Color Coded Speaker Wire

---

Video of RXA-F1:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXA-F1 is a 4 channel high power amplifier with 1,600 Watts peak output, 800 Watts RMS output (4 x 200 @ 2 Ohms). You can also bridge the amplifier and get 2 x 400 Watts RMS @ 4 Ohms. The CEA-2006 compliant rating is 65 x 4 @ 4 Ohms and 95 x 4 @ 2 ohms <1% THD. Most brands do not use CEA compliant ratings because quite simply they do not want you to be able to compare their amps to others on the market. Over here at Rockville, we want you to be able to compare our amps to any brand on the market. For this reason we are supplying you with multiple ratings. The CEA compliant rating should be used when matching up or comparing this amplifier to other CEA compliant brands such as Kicker, Rockford Fosgate, Alpine, etc. We also supply an RMS rating which should be used when comparing with great brands that are not CEA compliant such as Hifonics, Earthquake, Powerbass, etc. The peak rating is simply what the amplifier can hit for a split second at the highest point of a song. This rating from any brand is not really important. RMS and CEA ratings truly are the most important.

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXA-F1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

One last point I want to make about this amplifier is efficiency. The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.

We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXA-F1 1600 Watt Peak/800w RMS 4 Channel Amplifier Car Stereo Amp
• • CEA Compliant Power Ratings:
    • 260 Watts (4 x 65 Watts) at 4 ohms and 1% THD+N
    • 380 Watts (4 x 95 Watts) at 2 ohms < 1% THD
      
    • 2 x 200 Watts bridged @ 4 Ohms < 1% THD
      
  • RMS Power Ratings
    • 800 Watts (4 x 200 Watts RMS) @ 2 ohms
      
    • 800 Watts (2 x 400 Watts RMS) @ 4 ohm Bridged
      
    • 500 Watts (4 x 125 Watts RMS) @ 4 ohms
      
• Peak Power: 1600 Watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 Ohms)
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB Bass Equalizer
  
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• 3 Channel Mixed-Mono Capable
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• 2 CH / 4 CH Input Mode Switch
• RCA Preamp Line Output
• ELNA Brand Audiophile Capacitors
  
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD: < 0.05%
• Frequency Response: 10Hz - 40KHz
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• CH3 & CH4 Low Pass 50Hz - 3KHz
• CH3 & CH4 High Pass 15Hz - 1KHz
• CH1 & CH2 High Pass 50Hz - 300Hz, 500Hz - 3Khz (x10)
  
• Sensitivity: 100dB @ 1w / 1m
• Damping Factor: > 200 @ 100Hz
• 60 Amp Maxi Fuse
• Dimensions: (W x H x L) 8.5? x 1.8? x 13?
  

Owner’s Manual

?

---

Video of RWK42:

Unboxing Video for RWK42:

Description:

The Rockville RWK42 4 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (2) sets of RCA cables.

Features:

• Rockville RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit
• (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17 4 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F