- (1) Pair of Rockville RV6.3A 6.5" 3-Way Car Speakers 750 Watts/140 Watts RMS CEA Rated
- (1) Pair of Rockville MAC65B 6.5" Black Aluminum Wakeboard Tower Speaker Pod Enclosures
- (1) Pair of Rockville 1.75" Rubber Adapter Inserts 4 Polaris RZR Tower Speaker Enclosures
- (1) Rockville MARINE 16G50 OFC 16 Gauge 50 Foot 100% Copper Speaker Wire White
Video of RV6.3A:
Description:
Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. We use top quality polypropylene cones which are known for their high damping qualities. This means they can have a controlled break-up, which results in a smoother high frequency roll-off. Our Flexmotion Butyl Rubber Surrounds give the speakers a smooth response with minimal distortion. For smooth and extended high frequency sounds we used high temperature PEI dome tweeters with ferrite magnets. The RV-A series speakers are designed with superior SPL response and extremely high power handling making these perfect for use with the amp built into your receiver or with a high powered external amplifier. Due to their shallow mount design, these speakers fit in 97% of all vehicles.
CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.
What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.
Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify; loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.
Features:
- Pair Rockville RV6.3A 6.5"/6" 3-way car speakers
- Peak Power Rating: 750 Watts per Pair / 375 Watts Each
- CEA Compliant RMS Rating: 140 Watts per Pair / 70 Watts Each
- Polypropylene woofer gives amazing bass and mids
- Flex Motion Butyl Rubber Surround
- 1.2” PEI dome tweeter with ferrite magnet give amazing highs
- 0.6” super tweeter
- Steel high quality basket
- Rubber magnet boot cover
- Frequency response: 34-20,000 Hz
- Sensitivity: 91 dB @ 1w/1m
- Mount depth: 2.12"
- Impedance: 4 Ohm
- Grilles included
- Aluminum voice coils
- 100% oxygen free copper voice coil windings
- Cotton spider material
- Copper terminals
- Cutout diameter: 4.92”
- Magnet: 8 Oz Y25 magnet
- Magnet dimensions: 80mm x 12mm
- Fs: 85.94 hz
- Re: 3.6 OHM
- Qes: 0.032
- Qts: 0.021
- Qms: 0.063
- Fits 6” and 6.5” openings
- Top mounting depth: 2.13” Inch (95% of installs use the top mounting depth)
- Bottom mounting depth: 2.44” inch (This measures the speaker from top to bottom)
Video of MAC65B:
Includes:
- 2 Wakeboard Cans
- All mounting hardware
- (2) 2.375” rubber inserts
- (2) 2.25” rubber inserts
- (2) 2.5” rubber inserts
- (2) 2” rubber inserts
Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65B comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter. Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!
These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC65B features a black powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!
The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.
Features:
- Pair of Rockville MAC65B black aluminum can wakeboard tower enclosures
- Made of high quality 6061 aircraft grade aluminum
- Beautiful black powder-coat finish
- 100% waterproof and fully marinized against salt and fresh water conditions
- Internally wired for clean install—no exposed wires or terminals
- High efficiency design features the perfect airspace for 6.5” speakers
- Rugged universal mounting clamps made of 6061 aluminum
- Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
- Mounting Depth - 6.7"
- Total Depth - 9.15"
- Cutout - 5.55"
- Diameter - 7.39".
- Mounting diameter - 6.4" (Narrow diameter - 6.12")
- Height of mount - 3.75"
- Total height of unit - 11"
*Although the pre-drilled holes will accommodate most speakers on the market, there may be some that don't fit. If that is the case you can drill holes into the lip of the can to line up with your speaker's mounting holes.
Feature of MAC INSERT:
(2) Rockville 1.75" Rubber Adapter Inserts For Polaris RZR Tower Speaker Enclosures
Features of MARINE 16G50 OFC:
- Rockville MARINE 16G50 OFC 16 Gauge 50 Foot 100% Copper Speaker Wire White
- Tinned coating makes this wire marine grade and protects it from corrosion
- This is a 100% copper cable with no aluminum! If you want top performance then this is it!
- Gauge: 16 AWG (American Wire Gauge)
- Wire Length: 50 Foot
- Stranding: 28/0.15*2C (28 Strands of 0.15mm Wire)
- Super-Flex Design Ensures Optimum Flexibility
- Marine-grade cable jacket is designed to handle the most extreme conditions
- Foot markers printed on cable for easy cutting
- Positive and negative labels are printed on the cable jacket for easy identification
- 100% copper wire Eliminates Unwanted Noises and Maximizes Signal Transfer
- Tinned for Corrosion Resistance
- Designed for Marine, Car, and Outdoor use but also works great for home audio applications
- Color: White
- UPC:
- 613816452217
