- (1) Pair of Rockville RV5.3A 5.25" 3-Way Car Speakers 600 Watts/100 Watts RMS CEA Rated
- (1) Pair of Rockville MAC525S 5.25" Polished Metal Marine Wakeboard Speaker Pod Enclosures
- (1) Pair of Rockville RWBC525 Neoprene Covers For 5.25" Marine Wakeboard Tower Speakers
- (1) MB Quart N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller
- (1) MTX MUD50.2 100 Watt RMS 2-Channel Amplifier Amp For Polaris RZR/ATV/UTV/Cart
Video of RV5.3A:
Description:
Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. We use top quality polypropylene cones which are known for their high damping qualities. This means they can have a controlled break-up, which results in a smoother high frequency roll-off. Our Flexmotion Butyl Rubber Surrounds give the speakers a smooth response with minimal distortion. For smooth and extended high frequency sounds we used high temperature PEI dome tweeters with ferrite magnets. The RV-A series speakers are designed with superior SPL response and extremely high power handling making these perfect for use with the amp built into your receiver or with a high powered external amplifier. Due to their shallow mount design, these speakers fit in 97% of all vehicles.
CEA Rated
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.
What’ so special about Rockville Speakers “in engineering terms”?
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.
Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify; loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.
Features:
- Pair Rockville RV5.3A 5.25" 3-way car speakers
- Peak Power Rating: 600 Watts per Pair / 300 Watts Each
- CEA Compliant RMS Rating: 100 Watts per Pair / 50 Watts Each
- Polypropylene woofer gives amazing bass and mids
- Flex Motion Butyl Rubber Surround
- 1.2” PEI dome tweeter with ferrite magnet give amazing highs
- 0.6” super tweeter
- Steel high quality basket
- Rubber magnet boot cover
- Frequency response: 55-20,000 Hz
- Sensitivity: 90 dB @ 1w/1m
- Impedance: 4 Ohm
- Grilles included
- Aluminum voice coils
- 100% oxygen free copper voice coil windings
- Cotton spider material
- Copper terminals
- Cutout diameter: 4.52”
- Magnet: 8 Oz Y25 magnet
- Magnet dimensions: 80mm x 12mm
- Fs: 117.456 hz
- Re: 3.6 OHM
- Qes: 2.561
- Qts: 1.681
- Qms: 4.888
- Fits 5.25” and 5” openings
- Top mounting depth: 1.89” 95% of installs use the top mounting depth)
- Bottom mounting depth: 2.1” (This measures the speaker from top to bottom)
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Includes:
- 2 Wakeboard Cans
- All mounting hardware
- (2) 2.375” rubber inserts
- (2) 2.25” rubber inserts
- (2) 2.5” rubber inserts
- (2) 2” rubber inserts
- (2) 1.875” rubber inserts
- (2) 1.75” rubber inserts
Description of MAC525S:
Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC525S comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole. 6 precision molded high impact rubber inserts guarantee fitment on towers from 1.75” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC525S features a silver (chrome) polished finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!
The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.
Features:
- Pair of Rockville MAC525S 5.25” silver (chrome) aluminum can wakeboard tower enclosures
- Made of high quality 6061 aircraft grade aluminum
- Beautiful silver polished chrome finish
- 100% waterproof and fully marinized against salt and fresh water conditions
- Internally wired for clean install—no exposed wires or terminals
- High efficiency design features the perfect airspace for 6.5” speakers
- Rugged universal mounting clamps made of 6061 aluminum
- Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
- Mounting Depth: 5.5" Inches (140mm)
- Mounting Hole Diameter: 4.8" Inches (122mm)
- Outside Diameter:6.6" Inches (168mm)
- Screw Diameter: 5.4" Inches (139mm)
Video of RWBC525 :
Features:
- Rockville RWBC525 (2) 5.25" Neoprene Wakeboard Tower Speaker Covers.
- Affordable and popular way to protect speakers to keep them looking their best
- Protects your speakers from water, moisture, and all other outdoor elements
- Made of high quality, durable Neoprene fabric
- Heavy duty stitching
- Strong zipper provides snug fit and easy fitting
- Compatible with Rockville MAC525 5.25" Tower Speaker enclosures
- Includes 2 covers
Fitment Specification:
- Will fit 5.25” Speaker pods measuring
- Outside diameter: 6.6”
- Length: 8”
Authorized MB Quart Dealer!
Description of N1-WBT:
A high-end sound, marine certified waterproof wired bluetooth preamp controller for boats, off-road vehicles or project vehicles audio installation needs. With simple audio outputs to connect to an amplifier the N1-WBT allows simple installation to play music via any Bluetooth enabled device.
Features:
- MB QUART N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller
- Source Type: Waterproof wired bluetooth preamp controller
- Input Types: Bluetooth
- Control Buttons: Large, Waterproof - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off
- Bluetooth™ Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process
Specifications:
- Bluetooth Range: 32' (10 Meter)
- Pre-amp Outputs: 1
- Pre-amp Voltage: 2v
- Controller Dimensions: controller 2" (4.8cm) round
- Dimensions Mounting Hole: 0.8" (2.2cm)
- Dimensions Mounting Depth: 0.8" (2.2cm)
- Weight: 5oz (0.01K)
Advantages of purchasing from an authorized seller:
- Best prices - We sell all MB Quart Products at the lowest price as possible.
- Full Factory Warranty
- Detailed information of all products
- Lifetime Customer Service by MB Quart product Experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase MB Quart from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Authorized MTX Audio Dealer!
Description of MUD50.2 :
Built for "The Most Abusive Environments". A powerful, yet compact, audio amplifier that can be installed on any UTV, boat, sand rail, or motorcycle. The MTX MUD50.2 is the most compact amplifier that MTX has ever made. This unit features full range class D topology that delivers exceptional sound quality and excellent thermal efficiency. The unit includes 2 channels that are capable of delivering 50 watts of RMS power per channel @ 2 Ohms. More than enough power to drive a pair of full range speakers on a motorcycle or UTV. The entire unit is weather resistant including a conformal coated circuit board and control covers that prevent damage from moisture intrusion. The unique design includes a pigtail that contains all of the wiring necessary to connect power, ground, and signal without having to make a connection directly at the amplifier. This pigtail keeps moisture, dirt, and other hazards from harming the internal components of the unit, ensuring you can enjoy your music wherever the trail takes you.
Features:
- MTX MUD50.2 100 Watt 2-Channel Amp For Polaris RZR/ATV/UTV/Cart
- Compact Design Enables Installation Anywhere
- Conformal Coated Printed Circuit Board that Resists Moisture
- Fixed Crossover
- High Level & Low Level Inputs
- 200W Peak Power @ 2 Ohms
- Description: 2-Channel
- RMS Power: 100 Watts
- 4 Ohm RMS Power Output: 25W x 2 Channels
- 2 Ohm RMS Power Output: 50W x 2 Channels
- Topology: Full Range Class D
- THD: <1.0%
- Frequency Response: 11Hz - 40kHz
- Crossover: Fixed HPF @ 80Hz, 12dB/Oct
- Max Sensitivity: 200mV
- Maximum Input Signal: 5V
- Dimensions (H x W x D) 3.64" x 2.85" x 1.73" inches
Click here to view the Owner's Manual
- UPC:
- 613815583103
