Package Includes:

• (1) Rockville RV10P 10" 500w Car Audio Subwoofer in Vented Sub Enclosure Box - 4 Ohm
• (1) Crunch GP-1500.2 1500 Watt 2 Channel Car Audio Amplifier Stereo Amp Bridgeable
• (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100% Copper RCA

---

Video of RV10P:

Description:

The Rockville RV10P Single 10" 500 watt vented subwoofer enclosure will give you great sound quality at an affordable price. This system is designed to give you premium sound quality and enough power handling to shake your mirrors. This subwoofer is for people who want extra added bass that you can feel. It will play loud enough to eb heard from down the block but this is not one of those subs designed to win bass competition. This sub is for people who want great sound. If you want to win competitions, or listen at extreme volumes we have our K6, K9, Punisher, and Destroyer series for that.

This system utilizes a vented enclosure with vents strategically placed on the bottom of the enclosure. The enclosure is placed at a 15 degree angle to fire the bass out hard and give you extra punchy bass.

Subwoofer and Enclosure Features:

• Rockville RV10P Single 10" Subwoofer In Vented Enclosure
• 4 Ohm Impedance
• 500 Watts Peak Power
• 250 Watts RMS continuous music rating (Match up with an amp that delivers 250w RMS @ 4 ohms)
• 175 Watts RMS Test Tone rating (Playing test tones is brutal on a sub compared to music)
• Bonded, Stapled and Braced 3/5" MDF Cabinet
• Computer Designed, Under-Side Bass Reflex, Aero-Port System
• Angled at 15% for near perfect in vehicle bass alignment
• Exterior: Logo embroidered high quality aviation grade tweed carpet.
• Mono, gold-plated push style, speaker terminal
• High-Power, High-Efficiency 12" Subwoofer
• Injection Molded, Talc Filled, Brushed Polypropylene Cone
• High Excursion Butyl Rubber Surround
• 3-D Molded Dust Cap
• Linear Progressive Spider System
• 4 Layer, High-Power, Aluminum Voice Coil
• Bumped and Vented Magnet Motor Structure
• Frequency Response: 40Hz - 500Hz
• SPL: 92dB @ 1w/1m
• 50oz Magnet Motor Structure Weight
• Total Cabinet Weight: 19 Lbs.
• Dimensions: 13.4" (L) x 15.9" (W) x 13.8" (H)

---

Description:

Crunch Ground Pounder with QTD Technology delivers 1500 watts to subwoofers and includes built-in electronic crossovers.

Features:

• LOW NOISE PREAMPLIFIER CIRCUIT
  Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process.
  
• RCA INPUTS
  Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path.
  
• HIGH LEVEL INPUTS
  Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power.
  
• OPERATION MODE
  Stereo, Bridged Mono or Stereo/Bridged Mono Simultaneously.
  
• CROSSOVER TYPE
  Variable Electronic 12dB Per Octave.
  
• ELECTRONIC EQUALIZER
  Fully Adjustable 12dB Crossovers.
  
• CLASS/TOPOLOGY
  Class A/B: High sound quality circuit that allows POWER DRIVE to develop high levels of power with minimal distortion.
  
• OUTPUT DEVICE TECHNOLOGY
  Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion.
  
• HEAT SINK
  QTD Technology Aluminum: Quick Thermal Dispersion Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool with nearly undetectable distortions during normal music listening.
  
• POWER SUPPLY
  High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system.
  
• OUTPUT CONNECTIONS
  Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion.
  
• CONNECTION TYPE
  Screw Down Connectors: Easy access for hand tool allowing a quick and secure connection.
  
• LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS
  Monitor overload and speaker short protection with lighted indicators on the amplifier end panel.
  

Specifications:

• CLASS: Class A/B
• TOTAL CHANNELS: 2
• POWER @ 1 OHM (CH X WATTS): N/A
• POWER @ 2 OHMS (CH X WATTS): 2 x 750
• POWER @ 4 OHMS (CH X WATTS): 2 x 325
• MONO BRIDGED @ 4 OHMS (CH X WATTS): 1 x 1500
• CROSSOVER: Variable Electronic 12dB Per Octave
• TONE CONTROL/PARAMETRIC EQ: Built-in bass control
• BASS BOOST: Switchable: 0 / +6 / +12dB
• VARIABLE VOLTAGE: 0.2 to 9V
• FREQUENCY RESPONSE: 10Hz-22kHz
• SPEAKER LEVEL AUDIO INPUTS: Yes
• POWER TERMINAL 12V/GND: 4 AWG
• SPEAKER TERMINAL WIRE GAUGE: 12 AWG
• FUSING: 25A

---

Video of RWK81:

Description:

The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables.

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (1) sets of RCA cables.

Features:

• Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• (1) 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ 8 Gauge Translucent Blue Super Flex Power Cables
• 17’ 18 Gauge Blue Remote Cable
• 17’ 16 Gauge Clear Speaker Wire
• 3’ 8 Gauge Super Flex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.

Great features and great quality make Rockville a great choice.