Package Includes:

• (1) Rockville RPG2X12 Package PA System Mixer/Amp+12" Speakers+Stands+Mics+Bluetooth
• (1) Rockville RFAAW DJ Event Facade Light Weight Metal Frame Booth+Travel Bag+Scrim
• (2) Rockville Pro MIc Kit 1 - High-End Metal Microphone+Mic Stand+Carry Bag+Cable

---

Video of How to Set Up a PA Package:

Video of RPG2X12:

What's in the Box:

• (2) 12" ABS molded PA speakers with amazing sound
• (1) 8 Channel powered mixer with 1400 watts peak output power
• (2) Foldable Speaker Stands
• (2) 16 foot ¼" to ¼" Speaker cables
• (2) Metal wired microphones with Mic clip and XLR cables

Speakers:

• Two 12" premium 8 ohm professional long throw woofer with 2" voice coils, and 40 oz magnets!
• State-of- the-art 1" Titanium Diaphragm Driver Tweeter
• Incredibly deep bass and c lear sounding mids/highs
• 350 Watts RMS / 700 Watts Program Power / 1400 Watts Peak
• Molded plastic speaker cabinet for increased sound quality
• Two way cabinet architecture
• Horizontal / Vertical position for use as stage monitor or PA speaker
• Impedance : 8 Ohm
• Pole mountable
• Frequency range : 60Hz - 20KHz
• Sensitivity : 93dB
• Input connections : Two 1/4" jacks and one speakon jack
• Two 16 ft speaker cables (1/4" to ¼")
• Rubber feet protect the enclosures
• Maximum SPL : 111dB
• Input connections : Two 1/4" jacks in parallel
• Powder-coated steel grill

Mixer:

• 8 Channel Powered Mixer with 1400 watt amplifier built in Built in Bluetooth connectivity
• 17 Inputs!
• 2 Speaker outputs and line output to connect a subwoofer or more speakers
• USB / SD Input
• MP3 Playback
• LCD Display
• Bluetooth connectivity
• 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers
• 8 balanced XLR and ¼" microphone inputs
• Tape/CD Line inputs
• Master volume control
• Bass, treble controls, and level controls on each channel
• Reverb effect level control on each channel
• Digital delay effect with independent level control
• Phantom power for condenser mics!
• 5 Band graphic equalizer
• Line Out for connection to external amplifier
• Return input for connection of external effects processors
• Record Out for taping
• RF interference protection on all inputs
• Aux Send Output: -10 dBv nominal, 1k ohms
• Tape Rec Output: -10 dBv nominal, 1k ohms
• Input lmpedance: Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms
• Input Channel Equalization : +/- 15 dB @ 5 kHz
• Protection Circuit: Power on Mute delay time : 2 seconds
• 110/220 volt switchable
• Built in FM radio

Microphones:

• This package includes (2) of our famous RMM-XLR mics which are top of the line!
• Rockville RMM-XLR Dynamic Microphone
• Professional 10 FT XLR Cable Included
• Steel Mesh Grill
• On/Off Switch
• Rugged Metal Construction
• Natural Sound Reproduction
• Beautiful Black Finish (The perfect combination of matte and shiny black finish)
• Frequency Response : 50Hz-15kHz
• Super Cardiod Polar Pattern
• Impedance: 600 Ohm ±5%
• Sensitivity: -60dB ± 3dB (0dB=1V/Pa at 1KHz)
• Ships in 2 shipping cartons: Carton 1 is 29.9" x 16.5" x 29.9" and carton 2 is 15.7" x 19.1" x 29.5"

Owner's Manual

---

All about RFAAW:

All about Rockville DJ Facades and Accessories:

How To Set Up Your RFAAW | RFAAB:

Each Set Includes:

• (4) Panels each 27.5" W x 47.2" H
• Stretchable White Scrim
• Carry Bag for easy Transport
• 3M Velcro

Description:

The Rockville RFAAW DJ Event Facade is the best in its class! Our Rockville employees have used all the popular Façades on the market and had so many frustrations, so we decided to make our own!

What makes ours way better:

1. Light-weight

Our panels are made out of pure aluminum! Other brands use steel which is not as durable and weighs a lot more. They use this material simply because it is cheaper. We had the option during product development to choose steel or aluminum. The steel would have cost $10 less actually. We went with the aluminum because it is lighter in weight and much stronger.

2. Larger panels

We made each of our panels 27.5" inches wide. We include 4 panels which totals 110" inches. Our competitors panels are too small. Their panels are around 17 - 20 inches wide each panel. That adds up to only 80" inches. You would have to use a pretty small table or buy 2 facades. I am talking from personal experience.

3. Foldable design for quick setup and break-down

Our design folds for easy setup and breakdown! Our competitors advertise that their item can fold and break down easily. I've used them, and you have to literally disconnect the hinges, and then next time you use them again you have to reconnect it. I do not consider it quick or easy. Ours literally just folds and you do not have to disconnect all the hinges. Our model is the only one I have seen on the market that truly folds for quick and easy transport.

4. 360 Degree panel rotation

Our panels can rotate a full 360 degrees, giving you the freedom to wrap these around a table and angle them perfectly to make your setup professional looking. One of the biggest issues that annoyed me the most about the competitor's panels is that they have huge limitations in the angles of their panels. What was most annoying to me was that when you try to angle them how you want, they either got stuck or the hinges popped out and I had to set them up again and again. With the Rockville 360 degree rotating panels you are completely free to angle your panels easily without any limitations!

5. Built-in scrim!

The stretch fabric panels are easily removable for cleaning. Our scrim can be washed by hand in cold water and laid down flat to dry. Our scrim is also a fire retardant.

6. Travel bag included

Transportation and storage is simple with the included carry bag.

7. Non-slip rubber feet for stability

We decided to add rubber non-slip feet to our model. This adds more stability to the façade.

8. Expandable!

We sell models RAPFAW and RAPFAB which are add on panels so you can expand your black or white facade and have an unlimited amount of panels connected together. We also sell separately models RSCFAB and RSCFAW which are black or white scrims. This way you can interchange the color of your scrim depending on the event you are using this for. Another purpose of this is if you want to have one set in the wash you can still have a backup available.

9. Price!

I personally felt like I got ripped off when I paid over $250 for a DJ Event Façade. I did not see any reason for it to cost so much. I got even more upset when I put it together and it did not feel like $250. We decided to go to market with a product twice as good at half the price! We want the best gear to be affordable for everyone!

10. 90 Day Money Back Guarantee including return shipping!

If for any reason you are not 100% satisfied with your purchase we will send you a prepaid shipping label and refund you in full for this item. We know that this will be the best Façade you have ever purchased so it is highly unlikely you will want to return it.

Features:

• Rockville RFAAW DJ Event Facade with White Scrim and Travel Bag
• (4) Panels included - each are 27.5" W x 47.2" H
• Light Weight Aluminum Frames. The entire product weighs 7 LBS, around a third of the weight of our competitors who make their panels out of steel! Also our light-weight aluminum is much stronger than steel
• Includes travel bag for easy transport
• Includes white scrim
• Includes a carrying bag to store and keep facade scrim looking its best
• Folds for easy break down and travel - no need to disconnect the hinges!
• 360 degree rotating panels allows each panel to be positioned to your liking with no limitations
• Detachable hinges
• Includes white scrim made of a special stretch material
• Scrim is fire retardant
• Scrim is easy to wash - simply wash with cold water and lay it flat to dry
• Non-slip rubber feet for stability
• Expandable: Add additional panels sold seperately (models RAPFAW and RAPFAB)
• Additional scrims available in our store in black and white (models RSCFAB and RSCFAW)
• Product weight: 7 LBS
• Packaged shipping weight: 10 LBS

Owner’s Manual

---

How to Set Up Your PRO MIC KIT 1:

Video of Pro Mic Kit 1:

Unboxing Video of PRO MIC KIT 1:

Description:

The Rockville pro mic kit 1 was created in response to a need we saw in the market for a very high quality microphone at an affordable price. We feel there are a lot of good mics around from reputable brands that sound great, but they are very expensive. When we looked at the cheaper ones on the market from both reputable and entry level brands; we were not impressed. We sent our product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all fell in love with!

You may be asking yourself; so what makes this mic so good? Well, there are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This Particular combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than Just a great pickup pattern, They also has very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved lots of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very Passionate about our products and we really have a lot of respect for our customer's standards. For this reason, we included in this package a 100 % OFC copper cable. There is no aluminum in this cable! This means the cable will last longer and will sound A Lot better. Ultimately what you get Is a distortion free signal. In addition we use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have went with plastic or cheaper metal, but we wanted to create a mic that we ourselves would want to use.

For the mic stand we include in this bundle, we made sure the height adjusts high enough and that the stand is thick and sturdy enough for anyone who will use it. We use plastic feet covers to stop unwanted sliding. The stand tubing is made of iron. It is rock solid. We gave the stand a beautiful black painted finish. Best of all, the stand is totally portable weighing in at only 2.42 LBS!

We pay a lot of attention to detail so I would like to mention why we went with a canvas carry bag. We sourced multiple bags and had multiple options of bags. We ended up spending more money and going with the better bag. It's a great quality canvas travel bag that will hold the mic, the stand, and all your mic accessories/cables. The bag has 2 carry straps which allow you to carry it with your hands or on your shoulders like a backpack. We also included internal sponge padding and straps to separate the mics and the stand and keep them both from rubbing against one another. You will be impressed with every component we include in this bundle from the mic to the bag.

90 Day Money Back Guarantee including return shipping!
If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please).

What's Included:

• Fully metal wired mic
• Mic cable (XLR to ¼" 100% OFC Copper!)
• Mic clip
• Metal mic stand
• Canvas carry bag
• Owners manual
• Warranty

Features:

• Rockville Pro MIc Kit 1 - High-End Metal Microphone+Mic Stand+Carry Bag+Cable
• Mic Features:
• M-56 Cartridge
• Full metal mic body
• Type: dynamic
• Neodymium magnet
• Polar Pattern: uni-directional
• Frequency Response: 80 - 13Khz
• Impedance: 600 Ohms ± 30%
• Sensitivity: -72 ± 3dB
• Mic Stand Features:
• High quality metal mic stand
• Made of strong iron tubes!
• Black Painted Finish
• Adjustable height: 31.5 - 59 inches
• Weight: Only 2.4 LBS!
• Plastic feet covers to stop unwanted sliding
• Plastic adjustable connector
• The bottom part of base is made of 20MM thick iron
• Top part of base is made of 15.2 MM thick iron
• Feet are made of 19MM iron
• Bag Features:
• High quality canvas
• Comfortably holds microphone, mic stand, cable and other mic accessories
• Other bundles include plastic bags, this canvas bag will protect better and can be thrown around without damaging your equipment
• Internal belt ties to lock the mic and cable in place and separate it from the stand
• Internal separator separating the mic from the stand to eliminate them rubbing together
• Internal sponge padding for protection the gear in the bag
• High quality zipper
• Bag prevents equipment from getting scratched
• (2) carry straps make it easy and comfortable to transport
• Straps were built as handles to carry or as shoulder straps to carry them like a backpack
• Bag is made with scratch proof canvas
• Bag can hold up to 22 pounds of gear! This is a very high quality bag!
• Stylish Rockville logo on bag so you can do not confuse this bag with someone else's
• Dimensions of Bag: 30.33" inches Length x 3.54" inches height
• Weight of bag: 0.44 pounds
• Cable Features:
• XLR to ¼" Cable
• 20 Feet
• 100% OFC oxygen free copper
• Cable delivers crystal clear distortion free signal
• Cable is 5 MM thick with cover (22 AWG standard mic cable)
• XLR cable connectors are very solid and durable
• Mic clip Features:
• Heavy Duty Standard Size Microphone Clip
• Stand Mountable
• Solid Plastic Construction with copper inside (part that screws to the mic)
• Black Color

Owner's Manual

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.