- (1) Rockville RPG10 10" Powered Active 600 Watt 2-Way DJ PA Speaker System
- (1) Gemini STL-100 Tripod DJ Karaoke Speaker Stand w/Customizable LED's + Remote
- (1) Rockville RWM1203VH VHF Wireless Dual HandHeld Microphone System/Digital Display
- (1) Rockville IPS20 Tablet/SmartPhone/iPhone/iPad Tripod Stand 4 All Tablets/Phones
- (1) Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper
- (1) Rockville RNRMR10 10' 3.5mm 1/8" TRS to Dual RCA Cable 100% Copper
Video of Youtube Karaoke:
Video of RPG10:
How to Set Up RPG Series Speakers (RPG8, RPG10, RPG12, RPG15) :
The Rockville RPG10 powered PA speaker is simply amazing in terms of sound quality, and raw power! This speaker has an incredible 600 watts of peak power and will deliver a massive amount of bass, mids, and highs. The ultra-efficient design is amazing!
This speaker is the result of a year of research and development. We tested samples of 5 top selling powered speakers and the RPG series out-performed them all. These go louder and have punchier bass. What we found to be interesting was that some of the other speakers we tested against these were rated by their manufacturers at 1,200 watts or more, but they only went around half as loud as these.
The 10" woofer built into this speaker has a 2" aluminum voice coil which provides an extremely loud, deep, punchy bass response. Couple that with our state-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver and the ultra-wide dispersion, 40° large-format horizontal wave guide horn and you get beautiful full range concert-quality sound. The linear class A/B amplifier built into these speakers is efficient and provides clean power to the speaker. Some of the competing speakers use cheap amps in their speakers. We really went out of our way to make sure the amp built into these speakers gives you enough power so you can really feel and taste the music. The amplifier also has a clipping LED and a limiter to ensure long life to the speaker. The built in 2 band EQ will allow you to fine-tune and tweak the sound to your liking.
The RPG10 has a versatile trapezoidal enclosure design which allows you to use it as a PA speaker or you can use the included mounting brackets and lay it on its' side to be used as a floor monitor. It is also flyable and stand mountable giving you many options on how you can utilize these speakers.
We also included all the inputs and outputs you would need along with great controls. These have XLR and 1/4" ultra-low noise Mic / Line inputs with volume control as well as line RCA and XLR inputs with separate Gain adjustments. There is also an additional balanced line output via XLR for linking of additional speakers.
If you are in the market for a high quality 10" active speaker, then we highly recommend the RPG10. We feel this is the best value on the market. You get great features, great quality, high power, and a lot of versatility for a great price.
Features:
- Rockville RPG10 10" Active/Powered 600 Watts DJ/PA Speaker System
- 150-Watt RMS / 300 Watts Program Power / 600 Watts Peak
- High power long-throw 10'' woofer with 2" aluminum voice coil provides incredibly deep bass and acoustic power
- Frequency Response: 45Hz-20KHz
- Maximum SPL @1w/1m: 122dB peak / 119dB continuous
- High-power 2-way pro sound reinforcement speaker system for live sound and playback applications
- Compact and light weight system delivers distortion free sound even at extreme SPL
- Linear Class AB amplifier technology: high power, transparent sonic performance
- Internal switch-mode power supply for low distortion audio with superior transient response
- Built-in bass and treble equalization processor for ultimate system control and speaker protection
- State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction
- Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into cabinet
- Ultra-low noise Mic / Line input via XLR & 1/4-inch stereo jacks with volume control
- Line RCA and XLR input with separate Gain adjustment
- Additional balanced line output via XLR for linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning
- Flyable and stand mounting with 35-mm pole socket
- Ergonomically shaped handle for easy carrying and setup
- High-quality components and exceptionally rugged high impact ABS construction
- Amplifier clip limit LED indicator & power LED cabinet rear
- Front display power meter Blue LED
- 110 / 220 Volt switchable power supply with external user serviceable fusing
- Dimensions : 14.21" X 10.87" X 19.72"
Description of STL-100:
A WELL-DEFINED LED SPEAKER STAND
Talk about an all-in-one, we’ve reinvented the speaker stand from boring to a party maker! The STL-100 can hold up to 60lbs and comes with the color changing customizable LED lights that change to the beat of the song. This is exactly what you need to bring your party to the next level. And as always, you’ll get Gemini’s durable construction at a price that can’t be beat.
Video of IPS20:
Features:
- Rockville IPS20 Tablet/Phone Tripod Stand
- Fits all Tablets+iPhone 6+Galaxy+More!
- Adjustable height from 35.5" to 63"
- Sturdy floor base
- Stand for iPad, iPhone and other tablets and phones from 4.7" to 12.9" screen sizes
- Fits any tablet with the width up to 9 inches - If the width of your tablet is 9 inches or under it fits in this stand
- Adjustable mounting bracket
- Comfortably use whether standing, sitting
- Perfect for karaoke, speeches, presentations, and more
- Tilts +5 degree and -5 degree for different angle viewing
- Foldable design for easy transportation and storage
- Holder material : ABS and rubber surface
- Stand material : Steel tubes with powder coating
Video of RCDR10B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable
- Dual RCA to Dual RCA
- Nickel-Plated for Rugged Durability and Efficient Signal Transfer
- 100% Copper Conductors for Enhanced Signal Clarity
- OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
- Length: 10 Ft
- Color: Black
Video of RNRMR10:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RNRMR10 3.5mm 1/8" TRS to Dual RCA Cable
- Nickel-Plated Plugs for Rugged Durability and Efficient Signal Transfer
- 100% Copper Conductors for Enhanced Signal Clarity
- OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
- Length: 10 Ft
HOW TO SET UP YOUR RWM1203VH:
Video of RWM1203VH:
Includes:
- 2 wireless handheld microphones
- 1 receiver unit
- User manual
- Batteries
- Transfer Cable
- Rockville RWM1203VH VHF Dual Channel Handheld Wireless Microphone System
- Large display on receiver + digital display on each mic
- Each mic is large and solid with a nice weighted feel
- Improved high performance wireless handheld microphone capsule
- Includes transmitter with two handheld, high sensitivity, unidirectional, wireless cardioid microphones
- Featuring a dual filter design to limit feedback and interference
- Ultra signal stability eliminates unwanted distortion
- Transmitter automatically links to receiver for ease of use
- Use two handheld mics at once
- Individual microphone volume controls
- Low power consumption for longer battery life
- System comes in 4 different frequency options. You can request a specific one in the notes A. 255.1/227.1 MHZ
B. 224.9/256.9 MHZ
C. 228.9/253.4 MHZ
D. 230.8/255.8 MHZ
Specifications:
System:
- Operating Range: 150 feet or more
- Channel: Two Channel
- Frequency Range: 210MHz - 270MHz
- Frequency Response: 40Hz-18KHz
- S/N.:>103dB (1KHz-A)
- Operating Temp: 14°F – 122°F
- Oscillation Mode: Quartz Crystal
- Frequency Stability: ±0.005%
- Modulation Mode: VHF
- Harmonic Radiation :< 63dBm
- RF Output Power: 10mW
- Power Voltage: AC110V- 60Hz
- Mic Battery: AA x 2
Receiver:
- Sensitivity: (S/N=30dB) >2mV
- Audio Output Impedance: 600O
- Audio Output Level.: 0-0.5V
- Power Supply: AC110V 60Hz
- Current Consumption: =50mA
- Audio Out Connector: 1/4" unbalanced
Transmitter:
- Frequency Stability: ±0.005%
- RF Output Power: =10mW
- Modulation Mode: VHF
- Maximum Deviation Range: ±50KHz
- Microphone Mode: Fixed
- Power Supply: AA/1.5V×2
- Current Consumption: =35mA
- UPC:
- 613815758662
