Package Includes:

• (1) Rockville ROCKMIX 6FX 6 Channel Mixer USB Computer Recording Interface+Effects
• (2) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (2) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• (2) Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand+Mic Clip
• (1) Rockville RHPA4 4 Channel Professional Headphone Amplifier Stereo or Mono Amp
• (1) Rockville RCTR106B 6' 1/4'' TRS to 1/4'' TRS Balanced Cable, Black, 100% Copper

---

Video of RockMix 6FX:

How To set up your Rockmix 6Fx:

What's in the Box:

• Mixer
• Power Adapter
• User Manual
• USB interface cable

Description:

The Rockville RockMix 6FX is the perfect compact solution for recording, streaming, live performances, gyms, restaurants, podcasting, karaoke and more. This mixer is packed with all of the important features that you need.

The built in effects engine on this mixer has 16 amazing sounding effects, ranging from reverbs / delays, lush choruses to voice canceler. We use a high-resolution 24 bit DSP effects processor, which makes them sound so crisp. These sound better than most external FX processors and are easier to integrate into your setup.

The built-in USB interface allows you to record the master output of all the channels to the recording software on your computer. The USB interface will also allow you to easily play back songs or other audio from your computer or laptop to either the main mix or the headphones output of the mixer.

The USB interface is also perfect for podcasting. It is the bridge to get your computer audio to your speakers or to get your audio output to your computer for recording or live streaming.

Our low-noise mic pre-amps are clean, with a lot of headroom, ensuring a clear sound. Mic pre-amps are one of the most important parts of a mixer. A good quality pre-amp such as this one makes a world of a difference in the sound.

The 2-band EQ and panning allows you to customize the sound the way you want it. We added pro Bluetooth connectivity, so you can have wireless playback whether you're in a gym, restaurant, home, or any other place where you do not want to hard-wire your playback device. The Bluetooth is also a great way to have guests call to your podcast show.

Channels 1 and 2 have XLR and ¼” combo jack inputs. Then you get 2 stereo channels that can accept a variety of sources ranging from microphones to any mono/stereo instruments. Channels 1 and 2 have 48V phantom power for use with condenser mics.

Channels 3 and 4 are great because you have the option to route the effects to these channels.

Channels 5 and 6 can accept a variety of sources ranging from microphones to any mono/stereo instruments.

The clipping indicators on CH1 and 2 will prevent you from adding too much gain, making it easy to set your levels accurately.

This solid steel mixer is built like a Rock! Every component, including all potentiometers and knobs are extremely high grade.

If you are using this for Karaoke you will love our vocal canceller function that will remove the vocals so you can sing along to the music!

Features:

• Rockville RockMix 6FX 6 Channel Mixer with USB Recording Interface, Effects and Bluetooth
• Channels 1 and 2 have XLR / ¼” Mic/Line input combo jacks with gain and volume control, 2-band EQ, pan, 48V phantom power, pad, FX
• Ch 2 has an Hi-Z impedance switch which allows you to easily integrate instruments such as electric/acoustic guitar, bass or synth into your setup
• (CH3-4) ¼” jack Line input with volume control, gain-switch and FX
• (CH5-6) ¼” jack Line input with gain-switch and volume control
• USB audio interface can be assigned to Main Mix output or headset output
• XLR Main mix balanced L/R output
• ¼” Main mixed unbalanced L/R output
• ¼” Headset output
• 24 Bit FX engine with 16 DSP Effects (Each effect sounds great)
• Built in professional Bluetooth wireless audio streaming
• Main mix master volume knob
• Built in USB interface will send the Main Mix to your favorite DAW
• Interface will be identified and addressed as an external sound card in your DAW
• Peak LED indicator detects clipping on channel (CH1-2)
• Main mix has left and right LED volume meters and clip indicators
• Power on LED indicator
• Our design is Simple, flexible, and highly-efficient
• Super linear mic preamp with low noise (this uses a top of the line mic pre normally found in very expensive mixers)
• This mixer is built out of solid steel metal and when you pick it up you immediately can feel the weight and how solid it is
• All knobs and potentiometers are super sturdy and linear
• 48V phantom power for condenser microphones on CH1 and 2
• BUS powered allows you to power the mixer by plugging it into the USB port of your computer or laptop
• Mixer includes a power adapter so you can power the mixer either through the wall or USB
• British EQ circuitry is designed to emulate the classic EQ from the legendary mixers that came out in the 1950’s, 60’s and 70’s
• Dimensions: (L x W x H) 8.27" x 6.22" x 2.09"

---

All About Your RCM03:

How To Set Up Your RCM03:

How To Set Up Your RCM03 with an Interface:

How To Set Up Your RCM03 with a PSP5:

How To Set Up Your RCM03 with an ISOBOX:

Description:

Whether you’re recording vocals, instruments, or podcasts, this “lollipop” style condenser microphone delivers exceptional sound quality with a touch of elegance.

All Aluminum Chassis Design:

The RCM03 strikes the perfect balance between weight and performance. Its sturdy aluminum construction ensures durability without compromising on sound quality. 

Unidirectional Cardioid Polar Pattern:

Say goodbye to unwanted noise. The cardioid pattern focuses on capturing sound directly in front of the microphone, reducing pickup from the sides and rear. Your recordings will be crystal clear, free from distractions.

Medium-Sized 16mm Diaphragm:

The RCM03’s diaphragm strikes a harmonious balance between natural sound and wide pickup area. Whether you’re belting out soulful melodies or recording delicate acoustic instruments, this microphone captures every nuance.

Easy Integration

This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Connect the RCM03 to your audio interface or mixer using 48V DC phantom power or or you can connect it directly to your computer sound card with the 3.5MM cable. We include both cables!. It's compatible with most setups, making it a versatile choice for home studios, podcasts, live streaming, and more.

Low Noise, High Sensitivity:

With a sensitivity of -29dB±2dB (0dB=1V/Pa at 1kHz), the RCM03 ensures that even the softest whispers are faithfully captured. No detail goes unnoticed.

Elegant “Lollipop” Style:

Stand out from the crowd with the RCM03’s unique design. Its sleek form factor adds a touch of sophistication to your recording setup.

What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
• Metal Shock Mount
• Metal Anti-wind Foam Cap
• Owners Manual
• Warranty Card

Features:

• Rockville RCM03 Pro Studio Recording "Lollipop" Style Condenser Microphone
• All aluminum chassis design for optimal balance between weight and performance
• Standard shock mount included
• Polar Pattern: Unidirectional Cardioid
• Cardioid Polar Pattern Reduces Pickup of Sound From Sides and Rear, reducing unwanted noise
• Permanently Polarized Single Sided "Electret" Style Capsule
• Medium sized 16mm diaphragm for natural sound and wide pick up area
• Power Requirements: 48V DC Phantom Power
• Sensitivity: -29dB±2dB (0dB=1V/Pa at1kHZ)
• Output Impedance: 200O±30% (at 1kHz)
• Standard Operating Voltage: 3V
• Operating Voltage Range: 1.5V-10V
• Current Consumption: <= 500uA
• Voltage Deduction Characteristic: Within 3dB at 2V
• S/N Ratio: 74 dB
• Frequency Response: 30Hz - 20 KHz
• Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
• Load Impedance: >= 1000 Ohms
• Equivalent Noise Level: <= 18dBA (IEC 581-5)
• Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
• Electrical Current: >= 4.8mA
• Microphone Body Net Weight: 380 Grams (0.84 Pounds)
• Microphone Max.diameter: 51mm (2" inches)
• Microphone Length: 215mm (8.46" inches)
• Microphone Material: Steel Basket + Aluminum Body
• PCB Layout: Surface Mount

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

Includes:

• PRO-M50 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼" adapter

All About Your PRO-M50:

 

Description:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼" adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting

Specifications:

• Style: Closed-Back
• Design: Circumaural
• Transducer Type: Dynamic
• Driver: 40MM
• Sensitivity: 97±3dB
• Impedance: 32ohm
• Frequency Response:10Hz - 25KHz
• Max. Power: 600MW
• Rating Power: 260MW
• Net Weight: 290g (with cable)

---

Video of RDTS:

Features:

• Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand and Mic Clip
• Includes standard mic clip for regular mics
• For condenser mics – this is compatible with any shock mount (Rockville Rockshock is recommended)
• Compatible with Rockville IPS22 phone/tablet holder (sold separately in our store)
• Foldable design
• Adjustable height from 5.9” to 7.1” inches
• Includes standard mic clip
• Includes a Metal 3/8 to 5/8 adapter to support any mic clip on the market
• All metal construction is extremely strong and durable
• Smoothly raise or lower height with a reliable tightening knob
• Stable tripod leg base provides the ultimate stability and precise balance
• Perfect for studio recording, home recording, podcasts, screen-casts, video chats, conferences, and more

---

How to Set Up your RHPA4:

Video of RHPA4:

Includes:

• Headphone amplifier
• USB charging cable with charging brick
• Owners-manual
• Warranty card

Applications:

• Studio recording
• Podcasting
• Bands
• And more!

Features:

• Rockville RHPA4 4-Channel Professional Headphone Amplifier
• Inputs: ¼” and 3.5 mm input
• Stereo or Mono switch
• We include (4) ¼” TRS and (4) 3.5 mm headphone outputs run in parallel which means you can actually run 8 headphones (2 per channel)
• 4 Outputs each output has individual volume controls
• Thick metal shell casing
• High quality potentiometer knobs for each channel
• Power "On” LED.
• DC 5V USB power supply has low power consumption
• BUS powered means you can get power to the unit from a power bank or through the USB on a computer or laptop
• Rubber feet

Specifications:

• Input Impedance: 22K ohm
• Max. Input Level: +22dB
• Output Impedance: Min. 16Ohm
• Max. Gain: 20dB/Channel
• S/N Ratio: >98dB
• Frequency Response: 20 - 20 kHz
• S/N Ratio: > 90dB (ref 0dBu)
• THD: < 0.01%
• Power supply: 5VDC, >=1000mA via USB Power Adaptor
• Dimensions: 4.6” x 3” x 2.36”
• Weight: 0.85 Lbs
• 0dBu = 0.775Vrms

---

Video of RCTR CABLES:

Video of RCTR106B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.