How to Setup Your Podcast:

---

Package Includes:

• (1) Rockville RockMix 2 Channel Mic/Instrument Pro Recording Mixer+USB Interface/EQ
• (2) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (2) Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand+Mic Clip
• (2) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• (1) Rockville RC135TRS 3.5mm Male to Dual 1/4" TRS Female Headphone Splitter Cable

---

Video of RockMix 2:

How to Set Up Your Rockmix 2:

 

• Mixer with USB recording interface
• USB cable
• USB power adapter
• 4 Non-slip rubber pads
• Owner manual and warranty card

• Two Person Live Stream/recording (Zoom, podcast, etc)
• One instrument and one singer who wants to record or live stream or perform live

• Rockville RockMix 2 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface
• Switchable +48v Phantom Power on both channels for use with condenser microphones
• Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks
• Channel 1 is a microphone channel
• Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device
• Independent Level Controls for Main and Headphone/Monitor Outputs
• Integrated Plug-and-Play USB Audio Interface for Mac & PC
• USB Interface will send the master output in stereo to your DAW so you can record and/or stream your mix
• Operates on USB BUS Power or 5V DC External Power Supply (Included)
• Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet or through a standard 5V powerbank
• Super mini 2-channel mixing console designed for home studio recordings or live broadcast streaming
• RCA (L&R) outputs allow you to send the master output to an amplifier, powered speakers, recording device, etc
• 3.5mm headphone output
• Additional 3.5mm mic input allow you to connect an additional microphone in addition to the 2 main channels
• Each channel has a 2-band EQ to customize the sound
• Each channel has pan and level controls
• USB playbck switch assigns the signal to the MAIN MIX or MONITOR
• Monitor/headphone level control knob
• Main mix level control knob
• No external drivers are needed for mac or PC

• Sensitivity/impedance:
• CH1 & CH2 XLR: 2mV/1.8k ohm(gain max)
• CH1 Jack: 10mV/ 12k ohm(line)
• CH2 Jack: 30mV/ 20k ohm(line), 30mV/240k ohm(guitar)
• Output Level: 5.8V max(main, monitor)
• Frequency Range: 20-22000Hz
• THD: <= 0.05%
• S/N Ratio: 80dB

  Equalizer:

• Bass Range: ±15dB/80Hz
• High Range: ±15dB/12kHz
• Headphone: Impedance: >=16 ohm
• USB Interface: USB1.1 compatible, 16-bit delta-sigma, 44.1kHz sampling rates, 48kHz max.
• Phantom Power: +48V
• Power Supply: USB 5V 500mA Via USB Port of Computer; Via USB Power Adaptor; Via power bank
• Operating System: Windows 2000, XP or higher; Mac OS 9.0.4 or higher, 10.X or higher
• Item Dimensions (inches): 3.9” x 5.3” x 1.65”
• Item Weight: 0.95lb

---

All About Your RCM03:

How To Set Up Your RCM03:

How To Set Up Your RCM03 with an Interface:

How To Set Up Your RCM03 with a PSP5:

How To Set Up Your RCM03 with an ISOBOX:

Description:

Whether you’re recording vocals, instruments, or podcasts, this “lollipop” style condenser microphone delivers exceptional sound quality with a touch of elegance.

All Aluminum Chassis Design:

The RCM03 strikes the perfect balance between weight and performance. Its sturdy aluminum construction ensures durability without compromising on sound quality. 

Unidirectional Cardioid Polar Pattern:

Say goodbye to unwanted noise. The cardioid pattern focuses on capturing sound directly in front of the microphone, reducing pickup from the sides and rear. Your recordings will be crystal clear, free from distractions.

Medium-Sized 16mm Diaphragm:

The RCM03’s diaphragm strikes a harmonious balance between natural sound and wide pickup area. Whether you’re belting out soulful melodies or recording delicate acoustic instruments, this microphone captures every nuance.

Easy Integration

This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Connect the RCM03 to your audio interface or mixer using 48V DC phantom power or or you can connect it directly to your computer sound card with the 3.5MM cable. We include both cables!. It's compatible with most setups, making it a versatile choice for home studios, podcasts, live streaming, and more.

Low Noise, High Sensitivity:

With a sensitivity of -29dB±2dB (0dB=1V/Pa at 1kHz), the RCM03 ensures that even the softest whispers are faithfully captured. No detail goes unnoticed.

Elegant “Lollipop” Style:

Stand out from the crowd with the RCM03’s unique design. Its sleek form factor adds a touch of sophistication to your recording setup.

What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
• Metal Shock Mount
• Metal Anti-wind Foam Cap
• Owners Manual
• Warranty Card

Features:

• Rockville RCM03 Pro Studio Recording "Lollipop" Style Condenser Microphone
• All aluminum chassis design for optimal balance between weight and performance
• Standard shock mount included
• Polar Pattern: Unidirectional Cardioid
• Cardioid Polar Pattern Reduces Pickup of Sound From Sides and Rear, reducing unwanted noise
• Permanently Polarized Single Sided "Electret" Style Capsule
• Medium sized 16mm diaphragm for natural sound and wide pick up area
• Power Requirements: 48V DC Phantom Power
• Sensitivity: -29dB±2dB (0dB=1V/Pa at1kHZ)
• Output Impedance: 200O±30% (at 1kHz)
• Standard Operating Voltage: 3V
• Operating Voltage Range: 1.5V-10V
• Current Consumption: <= 500uA
• Voltage Deduction Characteristic: Within 3dB at 2V
• S/N Ratio: 74 dB
• Frequency Response: 30Hz - 20 KHz
• Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
• Load Impedance: >= 1000 Ohms
• Equivalent Noise Level: <= 18dBA (IEC 581-5)
• Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
• Electrical Current: >= 4.8mA
• Microphone Body Net Weight: 380 Grams (0.84 Pounds)
• Microphone Max.diameter: 51mm (2" inches)
• Microphone Length: 215mm (8.46" inches)
• Microphone Material: Steel Basket + Aluminum Body
• PCB Layout: Surface Mount

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

Video of RDTS:

Features:

• Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand and Mic Clip
• Includes standard mic clip for regular mics
• For condenser mics – this is compatible with any shock mount (Rockville Rockshock is recommended)
• Compatible with Rockville IPS22 phone/tablet holder (sold separately in our store)
• Foldable design
• Adjustable height from 5.9” to 7.1” inches
• Includes standard mic clip
• Includes a Metal 3/8 to 5/8 adapter to support any mic clip on the market
• All metal construction is extremely strong and durable
• Smoothly raise or lower height with a reliable tightening knob
• Stable tripod leg base provides the ultimate stability and precise balance
• Perfect for studio recording, home recording, podcasts, screen-casts, video chats, conferences, and more

---

 

Features of RC135TRS:

• Rockville RC135TRS 3.5mm Male to Dual 1/4" TRS Female Headphone Splitter Cable
• 100% Copper Conductors for Enhanced Signal Clarity
• 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
  
• Gauge: 26 AWG
  
• Color: Black
  
• Length: 1 Ft.

---

Includes:

• PRO-M50 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼" adapter

All About Your PRO-M50:

 

Description:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼" adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting

Specifications:

• Style: Closed-Back
• Design: Circumaural
• Transducer Type: Dynamic
• Driver: 40MM
• Sensitivity: 97±3dB
• Impedance: 32ohm
• Frequency Response:10Hz - 25KHz
• Max. Power: 600MW
• Rating Power: 260MW
• Net Weight: 290g (with cable)