Package Includes:
- (1) Rockville ROCK-U MINI 2x2 USB Computer Recording Interface 24 Bit 192Khz Home Studio
- (1) Rockville M25 25 Key USB Wireless MIDI Keyboard Controller With Bluetooth+8 Pads
- (1) Rockville RCM PRO Studio/Recording Condenser Microphone w Samsung Capacitors
- (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Pair Rockville APM5B 5.25" 250 Watt Active/Powered USB Studio Monitor Speakers
- (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
- (1) Rockville RockShield 1 Studio Microphone Isolation Shield w/Sound Dampening Foam
- (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
- (2) Rockville RCTR106BL 6' 1/4'' TRS to 1/4'' TRS Balanced Cable, Blue, 100% Copper
Video of ROCK-U MINI:
How To Set Up Your ROCK-U MINI:
Description:
The ROCK-U 2x2 is the ideal solution for those who need a low-latency, compact and reliable 2 in / 2 out computer USB audio interface. It is bus-powered and doesn't require any external adapters or power sources : simply connect it to your computer using the provided USB cable and you're all set.
The ROCK-U 2x2 has 2 channels.
Channel 1 features an XLR/1/4" combo jack with phantom power.
Channel 2 features a dedicated 1/4" instrument input.
Additionally, the PAD switch on CH1 allows you to properly gain stage your input source and have a clear signal with a lot of headroom. The signal/clipping indicator lets you monitor your signal in real-time and keep an eye on the sensitivity of your inputs in order to avoid distortion.
Our low noise studio-grade preamps offer clean and clear signal with good signal-to-noise ratio and lots of headroom. Whether you're plugging in a microphone, guitar, bass or synth, the preamps will accurately capture the source with no added artifacts. The 24 Bit / 192 kHz sample rate lets you achieve the highest digital resolution when recording.
The direct/usb monitoring switch lets you choose if you want to monitor your input signal in real-time with 0ms latency. 2 x 1/4" TRS outputs with dedicated volume control provide connectivity to your favorite studio monitors. There is an extra 1/4" headphone out with separate volume control, for monitoring with studio headphones.
Finally, the high-quality metal casing ensures long-term durability for this convenient, compact and portable interface.
Features:
- Rockville ROCK-U 2X2 USB Computer Recording Interface
- 24 Bit 192Khz sampling rate
- 2 Inputs and 2 Outputs
- Ch 1: XLR/1/4" Line/Mic input Combo Jack
- CH 2: ¼" TRS input with Hi-Z switch for connecting guitar, bass etc
- Studio-grade mic preamps with low noise and lots of headroom
- 48v phantom power for use with condenser mics
- Bus powered lets you record on the go (Can get power through the USB of your computer or laptop or power bank)
- USB 2.0 high speed
- Dedicated 1/4" TRS outputs for connecting studio monitors
- ¼" headphone output
- Flexible routing options for mixing and assigning input streams to outputs
- Frequency Response: 20-20KHz\
- Thick metal housing
- Signal and clipping indicator lights
- Ability to monitor direct signal in real-time (with 0ms latency) or USB playback
- Playback/USB button
- Perfect for home studios, recording on the go, or recording a live show
- Very versatile with low latency
- Can record dynamic/condenser mics, instruments, and line level signals
- Independent volume control for channel 1 and channel 2
- Main mix volume control
- Headphone volume control
- Compatible with all Windows and MAC computers and laptops
- Weight: 0.9 Lbs
- Dimensions: 3.1" L x 4.5" W x 1.8" H (Inches)
All About Your M25 Series of Wireless Midi Keyboards:
How To Set Up Your M25 Series of Wireless Midi Keyboards:
What's In The Box:
- MIDI Controller
- USB Type-C Charging and Connecting Cable
- Owner Manual
Description:
Rockville M25 25 Key Wireless MIDI Keyboard Controller
The Rockville M25 is a versatile and feature-packed MIDI keyboard controller designed for musicians, producers, and performers. Whether you’re in the studio or on the go, this compact and lightweight controller offers powerful functionality and seamless connectivity.
The Rockville M25 combines functionality, portability, and affordability, making it an essential tool for music production and performance. Elevate your creativity with this powerful MIDI keyboard controller!
Key Features:
- MIDI Over Bluetooth (Fully wireless):
Experience low-latency wireless control of your software instruments. The M25 allows you to connect and control your favorite DAWs and virtual instruments without the hassle of cables. - Pitch Function:
Easily adjust pitch for expressive performances. - OCT- or OCT+:
Quickly shift octaves to explore different musical ranges. - Semitone Transposition:
Fine-tune your melodies by transposing in semitone increments. - Dynamics Function:
Capture the nuances of your playing with velocity-sensitive keys. - Built-in Arpeggiator:
Create intricate patterns with adjustable resolution, range, and modes. - Arpeggiator Tap Tempo Button:
Sync your arpeggios to your desired tempo. - ARP Auto Accompaniment Function:
Enhance your compositions with automatic arpeggios. - Backlit MPC-Style Pads:
The 8 velocity-sensitive pads are RGB backlit and offer note repeat and full-level functions. - 127 Drum Pad Settings:
Customize your drum pad layout for beat production. - Customizable Controllers:
Configure the 8 assignable digital rotary knobs to suit your workflow. - Pressure-Sensitive Joystick Control:
Use the 4-way joystick for dynamic pitch and modulation control or assign it to other functions. - Dedicated Octave Up and Octave Down Buttons:
Quickly shift octaves during performance.
Power Options:
- USB 5V: Power the controller via USB.
- 1000mAh Li Battery: Enjoy 7-8 hours of wireless playtime per charge.
- Battery Life Indicator: Monitor battery status on the OLED display.
- 25 Velocity-Sensitive Synth-Action Mini Keys:
Play comfortably and expressively. - Easy-to-Read OLED Display:
Get immediate feedback on parameters and settings. - Sustain Pedal Input:
Connect an external sustain pedal for extended notes. - Compact and Portable Design:
Take the M25 anywhere your creativity leads.
Flexible Connectivity:
- USB-MIDI: Connect to your Mac or PC via USB.
- MIDI Over Bluetooth: Seamlessly integrate with your favorite DAWs.
- 3.5mm MIDI Output: Connect to external MIDI gear.
DAW Compatibility: The M25 works flawlessly with popular software such as:
- FL Studio
- Cubase
- Logic Pro X
- Bitwig
- Reason
- Studio One
- GarageBand (iOS)
- Ableton Live
- Pro Tools
- Cool Edit Pro
- Everyone Piano
- Samplitude
- Nuendo
- MOTU Digital Performer and more!
- Color: Standard
All About Your RCM PRO:
How To Setup a Rockville Condenser Microphone with Your Computer:
How To Set Up a Twitch Stream with Rockville Equipment:
What's In The Box:
- (22 gauge, 10 feet) XLR to XLR Cable - To connect to the phantom power input on your mixer or interface
- (22 gauge, 10 feet) 3.5mm to XLR Cable - To connect the microphone to your computer
- Metal Shock Mount
- Large Wind-Screen/Pop-Filter
- Owners Manual
- Warranty Card
Description:
Introducing, the Rockville RCM PRO, our newest high-quality, professional studio/recording condenser microphone! With it's large diaphragm it provides smooth, natural sound and low noise, it also delivers great bass, mids, and highs on all of your recordings. This microphone is very sensitive to incoming sounds to give you the best possible sound! In addition, it includes a 25mm cartridge that allows for a bigger pickup area to pick up incoming sound. The cartridge is the most important aspect that determines the sound quality, and the RCM Pro has one of the best quality cartridges available for any microphone under $150. This microphone sounds better than other name brand microphones that cost twice the price!
The body of the microphone is made of a special zinc metal material. The super strong construction prevents noises from shocks and vibrations. This is especially important when recording loud music including drums and bass. The microphone head is made of strong, high quality steel and features a one-piece microphone head design. Most microphones will have a microphone head that is 2 pieces glued together. Our one-piece microphone head ensures longer life, and better durability. In addition, it helps to eliminate unwanted vibrations that may occur. This microphone has two capacitors (22µ50V and 47µ16V). We used Samsung capacitors from Korea, which are the highest quality capacitors on the market. These are important to help stabilize the voltage so that your recordings are consistent throughout, even if there are sudden changes in the volume or frequency ranges. We compared this microphone to the 3 most famous brands of microphones and the RCM PRO outperformed similar microphones that sell for over double the price!
Features:
- Rockville RCM PRO Professional Studio/Recording Condenser Microphone
- Best Applications: Home-Studio, Recording Studio, Broadcasting, Podcasts, Live Performances, and much more!
- Large diaphragm for smooth, natural sound and low noise
- 25mm Large Cartridge - Allows For Bigger Pickup Area
- Two Large Capacitors: 22µ50V and 47µ16V
- Large Diaphragm - Provides Smooth Natural Sound, and Great Bass, Mids, & Highs
- High SPL Handling and Wide Dynamic Range
- Cardioid Polar Pattern Reduces Pickup of Sounds From Sides and Rear, Reducing Unwanted Noise
- Element: Fixed-charge back plate, permanently polarized condenser
- Microphone Head is Made of High Quality Steel featuring One-Piece Head Design
- Microphone Body Is Made of Special Zinc Metal Material - Prevents Noise From Shock and Vibrations
- Frequency Response: 20Hz - 20 kHz
- Open Circuit Sensitivity: -30dB ±2dB (0dB = 1V/Pa @ 1 kHz)
- Impedance: 100 Ohms
- Equivalent Noise Level: = 23 dB A (IEC581-5)
- Maximum Input Sound Level: 142dB SPL (THD = 1.0% @ 1 kHz)
- Electrical Current: ?500Ua
- Noise: 20dB SPL
- Dynamic Range (Typical): 124 dB, 1 kHz @ Max SPL
- Signal-to-Noise Ratio: 74 dB, 1 kHz @ 1 Pa
- PCB Layout: Surface Mount
- Fixed Crossover Filter Cutoff Frequency: 50Hz - 16 kHz
- Power Requirements: 48V DC Phantom Power
- Output Connector: 3-Pin XLR
- Product Weight: 0.74 Lbs
- Product Height: 7.44" inches
- Shipping Weight: 3.32 Lbs
- Shipping Dimensions: 13.98" x 7.87" x 3.15"
Includes:
- PRO-M50 Headphones
- Detachable Cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold Plated ¼" Adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to our perform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case + Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response: 10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
How To Set Up Your APM Series Speakers:
All About Your APM5 Studio Monitors:
Unboxing Video of APM5B:
Description:
The Rockville APM5 Active Studio Monitor Comes in Pairs and each monitor will be bi-amped. What this means is that there is a separate amp for the highs and a Separate amp for the lows! Each speaker has 125 watts peak output power and 62.5 watts RMS giving you a total of 250 watts peak and 125 watts RMS per pair. We spent a lot of time developing the most premium studio monitors we ever built! I am very pleased and excited to talk to you guys about what we did to make these speakers sound as good as they do. If you are an audiophile you will find what we did to be quite amazing. Keep in mind, the only reason our price point is not 300 % higher is because you are buying manufacturer direct. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.
Description of the enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5" around and the front board is a full 1" thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use "baking paint" made for wood surfaces. It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The rear port is built to perfect spec to enhance the sound. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class "D" amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what's in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC's. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.
For highs, we have Ferro fluid enhanced "¾" neodymium silk dome tweeters with metal grill protection. If you are an audiophile I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without worrying about melting and blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.
We use a 5.25" woofer. This will out-perform a regular 5" woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids. Basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies so that the speaker can go loud without distorting. We use very high-grade crossover filters in our speakers. The specially wounded voice coils produce accurate response along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded!
Added benefits:
The rear-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality!
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat than your speaker can handle more power!
Thick "Wadding" protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound more clear, and at the same time protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!
Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The volume control, bass, and treble controls are all found on the rear of the unit.
These Monitors have all your standard studio inputs and outputs such as a ¼" and XLR combo input jack, RCA input, 3.5MM headphone output. We also added a USB port. The reason we did this is because instead of having to use the 3.5MM or 1/4" TRS jack, you can now directly select the speakers as an output on your computer without using an interface! And you will get true stereo sound!
Features:
- Rockville APM5B 5.25" 2-Way 250 Watt Powered USB Studio Monitor Speakers in Black (Pair)
- 125 Watt RMS
- Two-Way Active Studio Monitor Speaker System
- Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers
- Enclosure is made of top quality MDF wood. Our enclosure is not particle board, it is true high-grade MDF! The enclosure is 0.5" thick while the front board of it is a full 1" thickness to give you the ultimate best sound quality!
- Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
- We use "baking paint" made for wood surface. It lasts long and is the best paint for speakers!
- Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- The port is built to the perfect spec to enhance the sound
- Full Range Class "D" Amplifier Circuitry with Auto-Switching Power Supply
- LED Power on Indicator on Rear Panel
- Ferro Fluid Enhanced ¾" Neodymium Silk Dome Tweeter With Metal Grill Protection
- Tweeter has ¾" voice coil diameter
- Curved Front Bezel Design Eliminates Standing Wave Distortion
- Injection Molded Polypropylene Cone Woofer
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
- Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
- Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
- We developed the most optimized magnet structure, cone, and cabinet space that reproduces the sound to play back exactly the way it was recorded!
- Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
- Thick "Wadding" protects inside the speaker cabinet - Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
- World class top of the line audiophile grade components! We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit's designs.
- These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC's. Most people do not know brands who make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components
- 110 Volt compatible with SMPS technology
- Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
- We use a "6Sigma" style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
- Transducer Production Line to Make the SPL Performance Stable
- One Complete Pair with Mater / Salve Output Connection with Included Noise Rejection Cabling
- Includes a noise rejection cable to connect the 2 speakers together (This is a proprietary cable we use that connects the 2 speakers together without any unwanted noise). We also use a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight
- Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish
Inputs / Outputs / Controls:
- Volume control
- Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently)
- ¼" and XLR combo input jack
- High Speed USB jack
- RCA input
- 3.5mm Headphone output
Details:
- Certification: CE and RoHS Compliant
- Amplifier: Class D, very efficient amplifier with top components!
(ADI--ADAU1701, TI--TPA3116, SMPS) - System Impedance:
- Tweeter 6 ?
- Woofer 4 ? - Signal to noise ratio: 90dB (Maximum output with THD+1<1%, A-weight)
- Max SPL: 100dB @ 1w/1m
- THD: 0.10%
- Frequency Response: 50Hz - 20 kHz
- 250 Watts peak output per pair
- 125 Watt RMS output per pair
- Each speaker produces 125 watts peak and 62.5 watts RMS
- Input voltage: 120V
- Components: ¾" silk dome tweeter and 5.25" woofer with rubber surrounds and polypropylene cone
- Product Size (Single): (W*H*D): 7.4'' inch x 11.34'' inch x 9.76'' inch
- Shipping Dimensions (For pair boxed): (W*H*D): 24.1'' inch x 13.54'' inch x 10.7'' inch
- Net Weight (Pair): 15.4 LBS
- Shipping Weight (Pair): 18.37 LBS
- Includes 8.5 foot speaker linking cable and power plug
- Input Impedance (Ohms): 10 K Ohm Balanced
- System Volume: (-30dB to +6dB)
How To Set Up Your RVSM1:
Video of RVSM1:
Description:
These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind. The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel.
Includes:
- (2) Near-Field Monitor Stands
Features:
- Studio Monitor Stands (Pair)
- Adjustable Height
- Steel Construction
- Nylon clutch for adjusting
- EVA Pad on top to eliminate unwanted vibrations
- Triple enforced steel base with ultimate sturdiness
- Black Color
- Weight Capacity: 80 lbs.
- Adjustable Height Range: 33-45 inches
- Base: 17.7 x 17.7 x 17.7 inches
- Top Plate: 9.05 x 9.45 inches
- Tube Diameter: 1.5 inch - 1.37 inch
Fit Guide Table:
| Brand | Model |
|---|---|
| ADAM Audio | A3X |
| A5X | |
| A7X | |
| S2V | |
| S3V | |
| S5V | |
| T5V | |
| T7V | |
| Alesis | Elevate 5 MKII |
| M1 Active MK3 | |
| Focal | ALPHA 50 |
| ALPHA 65 | |
| ALPHA 80 | |
| ATC | SCM12 Pro |
| SCM20ASL Pro mk2 | |
| SCM20PSL Pro mk2 | |
| Auratone | 5C |
| Avantone Pro | Abbey |
| MixCube | |
| Behringer | 1C-BK |
| Media 40USB | |
| MS16 | |
| MS40 | |
| NEKKST K5 | |
| NEKKST K8 | |
| Studio 50USB | |
| Truth B2030A | |
| Blue Sky | SAT 6D |
| Dynaudio | BM5 MKIII |
| LYD 5 | |
| LYD 7 | |
| LYD 8 | |
| Presonus | Eris E4.5 |
| Eris E5 | |
| Eris E8 | |
| Focal | Shape 40 |
| Shape 50 | |
| Shape 65 | |
| Shape TWIN | |
| Gemini | SR-5 |
| SR-8 | |
| Genelec | 8020D |
| 8030C | |
| 8040B | |
| 8050B | |
| 8320A | |
| 8330A | |
| 8331 SAM | |
| 8340A | |
| 8341 SAM | |
| 8350A | |
| 8351A | |
| M030AM | |
| M040 | |
| JBL | 305P MKII |
| 306P MKII | |
| 308P MKII | |
| 705P | |
| 708P | |
| KRK | ROKIT 4 G3 |
| ROKIT 5 G3 | |
| ROKIT 6 G3 | |
| ROKIT 8 G3 | |
| V4 S4 | |
| V6 S4 | |
| V8 S4 | |
| VXT-4 | |
| VXT-6 | |
| VXT-8 | |
| Mackie | CR4BT |
| CR5BT | |
| HR624 MK2 | |
| MR524 | |
| MR624 | |
| MR824 | |
| XR624 | |
| XR824 | |
| M-Audio | AV42 |
| BX5 D3 | |
| BX8 D3 | |
| Neumann | KH 120 |
| KH 80 DSP | |
| Pioneer DJ | Bulit6 |
| Bulit8 | |
| Presonus | R65 |
| R80 | |
| Sceptre S6 | |
| Sceptre S8 | |
| Rockville | APM5B |
| APM5C | |
| APM5W | |
| APM6B | |
| APM6C | |
| APM6W | |
| APM8B | |
| APM8C | |
| APM8W | |
| DPM5B | |
| DPM5C | |
| DPM5W | |
| DPM6B | |
| DPM6C | |
| DPM6W | |
| DPM8B | |
| DPM8C | |
| DPM8W | |
| Samson | M50 |
| MediaOne BT4 | |
| Resolv SE5 | |
| Resolv SE6 | |
| Resolv SE8 | |
| Focal | SOLO6 BE |
| Yamaha | HS5 |
| HS7 | |
| HS7i | |
| HS8 |
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.Great features and great quality make Rockville a great choice.
What's In The Box:
- 3 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter and 3/8” Mic Adapter
- All metal Tripod Desktop mic attachment
How To Set Up Your RockShield 1:
Video of RockShield 1:
Description:
Rockville’s RockShield 1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RockShield1 keeps unwanted outside audio waves and vibrations from affecting your recording. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, while room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a counter top or tabletop. Easy installation and studio quality performance will quickly make the RockShield 1 your go-to sound dampening isolation shield.
Features:
- Rockville RockShield 1 Studio Microphone Isolation Shield with Sound Dampening Foam
- Number of Panels: 3 Pieces
- Dimensions Each Panel: 8.2'' x 4.5'' inches
- Dimensions Assembled Unit: 11'' x 4.3” x 16.3” inches
- Keeps Excessive Room ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- 1.5" Thick High Density Pyramid Acoustic Foam
- Front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand Mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8” Die-Cast Metal Threads
- Mic Stand with 5/8” Adapter
- The shield frames are made of high strength die cast aluminum
- Net plates are made of high grade steel
- Net Weight (Without Tripod Stand): 1.1 lbs
- Net Weight (With Tripod Stand): 2.0 lbs
Video of RRS190S:
Authorized Rockville Dealer!
Description:
The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.
Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers' sound to become inaccurate, unfocused and lose their "musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.
How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems "shock absorbers". Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.
Rockville Studio Isolation Pads Feature:
- Easiest and affordable way to improve your studio monitors sound
- Decouples your studio monitors from desktops and monitor stands for accurate reproduction
- Each package contains 2 Isolation Pads - enough for 2 studio monitors
- 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
- Supports up to 100 lbs., so they can isolate a variety of studio gear
- Handsome charcoal gray color
Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don't get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the "coupled" vibrations, will be heard giving you false sound reproduction. But because these "coupled" vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By "decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.
Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors
Features:
- Rockville RRS190S: Monitor Isolation Pads
- 3 Angle High Density Foam
- 7.5" x 9.5"
- High quality, High Density Foam
- Eliminates vibrations and unwanted noises in your studio
- Price is for (2) pads which accommodates (2) speakers
Fits Speakers Such As:
| Brand | Product |
|---|---|
| Acoustic Audio | PSS-52 |
| Audioengine | P4 |
| Boston Acoustics | CS23 |
| Cerwin-Vega | XLS-6 |
| Dayton Audio | B452 |
| B652 | |
| Dual | LU43PB |
| Edifier | R1280T |
| R1700BT | |
| R1850DB | |
| R2000DB | |
| S1000DB | |
| ELAC | B6 |
| Debut 2.0 B6.2 | |
| Debut B4 | |
| Energy | CB-20 |
| Fluance | SX6W |
| JBL | 305PMKII |
| 306PMKII | |
| 308PMKII | |
| Arena 120 | |
| Arena 130 | |
| KEF | R300 |
| Klipsch | KB-15 |
| R-14M | |
| R-15M | |
| R-15PM | |
| RB-51 II | |
| RB-81 | |
| RP-150M | |
| KRK | RP103G3 |
| RP4G3 | |
| RP4G3W | |
| RP5G3W | |
| RP6G3 | |
| V6S4-NA | |
| V8S4-NA | |
| Mackie | CR3 |
| CR4 | |
| CR4BT | |
| CR5BT | |
| HR624MK2 | |
| MR524 | |
| MR624 | |
| XR624 | |
| XR824 | |
| MartinLogan | LX16 |
| Micca | MB42 |
| MTX | MONITOR5I |
| Polk Audio | RTI A1 |
| RTI A3 | |
| S15 | |
| S20 | |
| T15 | |
| TSi100 | |
| Presonus | Eris E3.5 |
| Eris E4.5 | |
| Eris E5 | |
| Eris E8 | |
| R80 | |
| Q Acoustics | 3020 |
| Samson | SAM30 |
| SAM50 | |
| Sony | SS-B1000 |
| SSCS5 | |
| Swan | M100MKII |
| M200MKII | |
| Theater Solutions | B1 |
| Yamaha | HS5 HS-5 |
| HS7 HS-7 | |
| NS-333 | |
| NS-6490 | |
| NS-B310BL |
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Video of RCTR CABLES:
Video of RCTR106BL:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCTR106 Nickel-Plated, 1/4'' TRS to 1/4'' TRS Balanced Cable
- 100% Copper Conductors for Enhanced Signal Clarity
- OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 6 Ft
- Color: Blue
- UPC:
- 613826594174
