Package Includes:
- (1) Rockville RMW8P 8" 800 Watt Car Subwoofer Enclosure
- (1) Autotek ATX1000.2 1000 Watt 2 Channel Car Amplifier
- (1) Rockville RWK81 Complete 8 Gauge Wire Kit
Video of RMW8P:
Save some space while you add some massive bass.
The incredible Rockville RMW8P Micro Enclosure ported subwoofer system delivers incredible output and infrasonic bass extension typically only
possible from much larger systems. The key to this performance lies in the precise tuning of its Rockville subwoofer driver into an efficient
tunnel system with a slot-ported design. The high power handling and high excursion subwoofer converts your amplifier's power into bass you can
feel. What’s most impressive is all that bass comes to you in a minimal amount of space – taking up less of your valuable vehicle storage space.
The compact design, which measures less than 5.5” wide, 19” long and 11”
high, allows it to be mounted into virtually any car or even compact truck. It works well under or behind the seat of pick up trucks, in car
trunks, hatchbacks or SUVs. The RMW8P is built with extensive interior bracing and extremely rigid MDF materials to maximize the enclosure's internal volume
while keeping the enclosure ultra stiff and very durable. The tunnel port wraps around the exterior walls of the enclosure to reproduce
extremely low frequency tuning that delivers superior bass extension and ultra smooth response. The port entry and exit are flared to further
enhance sound quality and minimizes air turbulence and noises through the vent.
This subwoofer system is shipped complete with woofer installed, wired, and ready to connect via a five-way binding post terminal. The enclosure is trimmed in a
carbon fiber pattern wrap and high-grade automotive carpet with a “black on black” Rockville logo embroidery on the front baffle. A grill
is also included to protect the subwoofer driver.
The Rockville RMW8P is CEA-2031 compliant and rated with an amazing 800 watts peak and 400 watts Program RMS and 200 watts continuous RMS (CEA-2031 compliant).
Peak Power = Amount of power the sub can handle for a burst during the loudest point during a song. This number is not as important as the RMS power. This subwoofer has 800 watts peak which is a lot of power for a compact 8" shallow subwoofer.
Program RMS Power = The RMS power the way most middle of the road brands on the market rate their products. This sub can handle 400 watts program power. So for example a 400 watt RMS Hifonics amplifier will work perfectly with one of these.
CEA Rated RMS Power = This is an official tested rating by a specific industry standard. This is the way the top brands in the industry such as Kicker, Rockford, etc rate their items. This subwoofer is 200 watts RMS CEA rated. This rating is measured at a very specific distortion level. You can feel confident matching this with a high end amplifier from Kicker, or Rockford, or any other high end brand that uses CEA compliant ratings.
We supply all 3 ratings so that you can compare prices of our product to any brand on the market and also so you can confidently match this subwoofer to amplifiers from many other brands.
If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.
If you want the best value for a shallow mount enclosed car subwoofer system and you want a great quality product that sounds great, and you also want hassle free return policies, then we highly recommend this Rockville RMW8P.
Features:
- Rockville RMW8P 8" 800 Watt Car Subwoofer + Tunnel Slot Ported Sub Enclosure Box
- 8” High power long excursion tuned subwoofer
- CEA Power Rated 200 Watts / 400 Watts RMS / 800 Watts Peak
- 1.5” high temperature 4 layer Kapton voice coil
- 70 oz magnet structure weight
- Talc filled polypropylene molded cone
- Linear progressive spider suspension
- Stitched to cone double laminated surround
- Extended pole piece technology
- Construction: CNC-Cut High-Grade MDF
- Steel mesh grill
- Recommended amplifier power: 200W- 400Wrms
- Nominal Impedance: 4 Ohm
- Frequency Response: 30Hz – 500Hz
- SPL: 96dB@1w/1m
- Dimensions (W x L x H): 5.3” x 19” x 11”
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
Description of ATX1000.2:
Autotek ATX1000.2
The
Autotek ATX series of amplifiers feature a new aluminum Flat Panel Heat
Sink Design allowing for flush installations and incredible heat
dissipation. All models are built on military grade PCB’s and feature a
PWM power supply along with Autoteks’ SEPP A/B class design. With fine
tuning in mind, each model features variable crossovers, bass boost and
level control at your fingertips. If you are looking to introduce an
aftermarket amplifier into your audio system but want to keep your stock
headunit in place, Autotek has you in mind as we have provided
high-to-low level converters built into all of our 2-channel ATX series
amplifiers. The ATX series from Autotek provides an affordable approach
to aftermarket audio upgrades with the same features and reliability
often found in higher end products. This is the Evolution of Power!
Features:
- New Flat Panel Heat Sink Design
- Military PCB Design
- SEPP A/B Analog Class
- 4/2 Ohm Stable
- Multi Channel Configurable
- PWM Power Supply
- Fully Adjustable 12 dB Crossovers
- Input Sensitivity From .2 to 5 V
- High and Low Level Inputs
- Subsonic Filter, Bass EQ
Specifications:
- Peak Power Handling:
- 4 ohms: 250 watts x 2 chan.
- 2 ohms: 500 watts x 2 chan.
- Bridged, 4 ohms: 1000 watts x 1 chan.
- Frequency Response: 35-45,000 Hz
- Damping Factor: >200
- S/N Ratio: >95 dB
- THD & N: <0.05%
- Channel Seperation: >70 dB
- Variable Input Level Control: 0.2V-5.0V
- Input Impedance: 47 kOhm
- Variable High-Pass Filter: 60-1.2 kHz
- Variable Low-Pass Filter: 30-250 Hz
- Bass Boost at 45 Hz: 0 ~ 12 dB
- Power Terminal: 4-GA
- Speaker Terminal: 12-GA
- Fuse Size: 2 x 15 Amp
- Dimensions(L x W x H): 9.84" x 9.72" x 2.17"
(Link opens in a new window)
Video of RWK81:
Description:
The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4.
The Rockville amplifier installation kits feature a new soft abrasion
proof insulating jacket. This rugged PVC outer jacket allows for 100%
improved flexibility over standard power cables making them extremely
easy to route through your vehicles interior, and it maintains
exceptional resistance to grease and oil. The PVC outer jacket can
with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings
product experts have tested this amp kit against many leading amp kits
on the market and were were impressed not only by the great looks but by
the quality of these Rockville installation kits as well. These kits
had a lower resistance rating than the other brands we compared and
tested them against. What this means is that Rockville manufactures
their kits with more copper than other kits at this price point,
ultimately providing your amplifiers with better and cleaner DC power,
so they work cooler and more efficiently. You will hear the difference a
Rockville installation kit will make!
One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (1) sets of RCA cables.
Features:
- Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
- (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable
- 17 8 Gauge Translucent Blue SuperFlex Power Cables
- 17 18 Gauge Blue Remote Cable
- 17 16 Gauge Clear Speaker Wire
- 3 8 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7 Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Soft abrasion proof insulating jacket allows for 100% improved flexibility
- PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- UPC:
- 613815621119
