• (1) Jeep Wrangler 97-06 Powered Subwoofer Enclosure+Front/Rollbar Speakers+Wire Kits
• (1) Metra 72-6512 Speaker Harness Connector for Chrysler Vehicles 90-07+Cherokee
• (1) Metra 82-1011 4" x 6" Speaker Mounting Bracket Plate for Jeep Wrangler 1997-2006
• (1) Rockville RMW8A 8" 800 Watt Ported Powered Truck Subwoofer In Slim Enclosure
• (1) Pair Rockville RV46.2 4x6" 2-Way Car Speakers 280 Watts/70 Watts RMS CEA Rated
• (1) Pair Rockville RWB65B 6.5" Black 2 Way 250 Watt Marine Wakeboard Tower Speakers
• (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
• (1) Wakeboard Tower Speaker Mounting Screws & Larger Roll Bar For Jeep Wrangler

Authorized Metra Internet Retailer!

Features:

• Metra 72-6512 Speaker Harness Connector for Chrysler Vehicles 90-07+Cherokee
• Quick and easy installation
  
• No cutting into original wires needed
  
• Plugs into original equipment radio
  
• Compatible with the following vehicles: 
  • Chrysler: 1999-2003 300M, 1995-2000 Cirrus, 1992-1999 Lebaron, 1995-2002 LHS, 1991-1996 New Yorker, 1996-2003 Sebring Coupe, 1995-2001 Sebring Sedan, 1991-2002 Town & Country, 2001-2003 Voyager.
    
  • Dodge: 1991-2003 Caravan, 1994-1999 Dakota, 1993 Daytona, 1998-1999 Durango, 1998-2007 Ram Pick. Eagle: 1993-1997 Vision,
    
  • Jeep: 1997-2001 Cherokee, 1997-2003 Wrangler.
    
  • Plymouth: 1996-2000 Breeze, 1995-2001 Neon, 1984-2000 Voyager
    

• Best prices - We sell all Metra Products at great prices
• Full Factory Warranty
• Lifetime Customer Service by Metra product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Metra from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Authorized Metra Internet Retailer!

Features:

• Metra 82-1011 Jeep Wrangler 1997-2006 4" x 6" 4x6 Speaker Mounting Bracket Plate
• Speaker Adapter
  
• Designed specifically for the 1997-2006 Jeep Wrangler
  
• Converts a factory dash speaker location to 4X6-Inch hole
  

• Best prices - We sell all Metra Products at great prices
• Full Factory Warranty
• Lifetime Customer Service by Metra product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Metra from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

How To Set Up Your RMW8A:

Wires, Inputs, and Controls on Your RMW8A Explained:

Videos of RMW8A:

Save some space while you add some massive bass.
The incredible Rockville RMW8A Micro Enclosure ported subwoofer system delivers incredible output and infrasonic bass extension typically only possible from much larger systems. The key to this performance lies in the precise tuning of its Rockville subwoofer driver into an efficient tunnel system with a slot-ported design. The high power handling and high excursion subwoofer converts your amplifier's power into bass you can feel. What’s most impressive is all that bass comes to you in a minimal amount of space – taking up less of your valuable vehicle storage space.

The compact design, which measures less than 5.5” wide, 19” long and 11” high, allows it to be mounted into virtually any car or even compact truck. It works well under or behind the seat of pick up trucks, in car trunks, hatchbacks or SUVs. The RMW8A is built with extensive interior bracing and extremely rigid MDF materials to maximize the enclosure's internal volume while keeping the enclosure ultra stiff and very durable. The tunnel port wraps around the exterior walls of the enclosure to reproduce extremely low frequency tuning that delivers superior bass extension and ultra smooth response. The port entry and exit are flared to further enhance sound quality and minimizes air turbulence and noises through the vent.

This subwoofer system is shipped complete with woofer installed, wired, and ready to connect via a five-way binding post terminal. The enclosure is trimmed in a carbon fiber pattern wrap and high-grade automotive carpet with a “black on black” Rockville logo embroidery on the front baffle. A grill is also included to protect the subwoofer driver.

The Rockville RMW8A is CEA-2031 compliant and rated with an amazing 800 watts peak and 400 watts Program RMS and 200 watts continuous RMS (CEA-2031 compliant).

Peak Power = Amount of power the sub can handle for a burst during the loudest point during a song. This number is not as important as the RMS power. This subwoofer has 800 watts peak which is a lot of power for a compact 8" shallow subwoofer.

Program RMS Power = The RMS power the way most middle of the road brands on the market rate their products. This sub can handle 400 watts program power. So for example a 400 watt RMS Hifonics amplifier will work perfectly with one of these.

CEA Rated RMS Power = This is an official tested rating by a specific industry standard. This is the way the top brands in the industry such as Kicker, Rockford, etc rate their items. This subwoofer is 200 watts RMS CEA rated. This rating is measured at a very specific distortion level. You can feel confident matching this with a high end amplifier from Kicker, or Rockford, or any other high end brand that uses CEA compliant ratings.

We supply all 3 ratings so that you can compare prices of our product to any brand on the market and also so you can confidently match this subwoofer to amplifiers from many other brands.

If you are not happy with these, we will call tag them and take them back within 30 days of when you receive them for a full refund. On top of that you get a 1 year exchange warranty for any defects.

If you want the best value for a shallow mount enclosed car subwoofer system and you want a great quality product that sounds great, and you also want hassle free return policies, then we highly recommend this Rockville RMW8A.

Features:

• Rockville RMW8A 8" 800w Tunnel Slot Ported Powered Subwoofer Enclosure Class D
• Built in Amplifier
  
• 8” High power long excursion tuned subwoofer
• CEA Power Rated 200 Watts / 400 Watts RMS / 800 Watts Peak
• 1.5” high temperature 4 layer Kapton voice coil
  
• 70 oz magnet structure weight
  
• Talc filled polypropylene molded cone
  
• Linear progressive spider suspension
  
• Stitched to cone double laminated surround
  
• Extended pole piece technology    
• Construction: CNC-Cut High-Grade MDF
• Steel mesh grill
• Remote Bass Knob Included
• Nominal Impedance: 4 Ohm
  
• Frequency Response: 30Hz – 500Hz
  
• SPL: 96dB@1w/1m
  
• Dimensions (W x L x H): 5.3” x 19” x 11”

Owner’s Manual

Video of RV46.2:

Authorized Rockville Dealer!

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. Our specially formulated Hexbass Cone Technology in combination with our Flexmotion Rubber Surround contribute to the speakers smooth extended response with minimal distortion for accurate reproduction of low end frequencies. The tweeters featured use high temperature PEI domes with neodymium magnets for smooth and extended high frequency sounds while the diffused PEI midranges offer outstanding sound dispersion contributing to the crisp clear midrange tones. The Rockville speakers are designed with superior SPL response so that they will play efficiently with stock head units but are powerful enough and capable of handling nominal amplifier power.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify, loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Rockville RV46.2 2-Way Car Speaker
• Peak Power  Rating: 280 Watts Per Pair/140 Watts Each
• CEA Compliant RMS Rating: 70 Watts Per Pair/ 35 Watts Each
• 4"x 6" Open Basket 2-Way Speaker
• HEX Base Technology Acrylic Speaker Cone
• Flex Motion Butyl Rubber Surround
• Linear Progressive Conex Spider
• 1” PEI Polyamide Neo Dome Mid/Tweeter
• 1/2” PEI Polyamide Electro Tweeter
• Built-in Capacitor Crossover Network
• Extended Frequency Response Speakers

Details:

• 20 oz. Magnet Structure Weight
• Impedance: 4 Ohm
• Cutout Diameter: 6" x 3.4"
• Mounting Depth: 2"
• Frequency Response: 83Hz - 20KHz
• Sensitivity: 90dB @ 1w / 1m
• Includes Complete Pair with Installation Hardware and Color Coded Speaker Wire

Video of RWB65B:

• No exaggerated power ratings : These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 150 watts RMS and 250 watts peak. (150 watts RMS is equal to about 400 watts rated by other brands)
• New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
• Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
• These can withstand all elements on the water for a lifetime of worry free use
• The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.

Features:

• Rockville RWB65B Pair of 6.5" WakeBoard Tower Speakers Totaling 500 Watts (250 Watts per speaker)
• Color : Black
• 6.5" Two-Way High Fidelity Speaker System
• Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
• Includes Stainless Steel Mounting Hardware
• 1" Polymide Dome Neodymium Midrange Tweeter
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Water / Rust Resistant
• Terminals Are Sealed with Rubber Gaskets
• Specially Tuned for PA Voice Over
• Polypropylene Mica Injected Cone with Santoprene Surround
• High BL Magnet Motor Structure
• Y30 High Density Magnets
• Oversized 1.25” Kapton Voice Coil
• Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage
• These Wakeboards Fit bars ranging from 1.26 inches to 2.05 inches and can even fit larger Bars with our optional longer screws
• Includes long screws that accommodate Jeep Wrangler and any roll bar
• Includes Stainless mounting hardware that wont rust or corrode

Details:

• Power Rating : 
• Peak Power Handling : 500 Watts (250 Watts per Speaker)
• RMS Power Handling : 300 Watts (150 Watts per Speaker)
• Frequency Response : 70 – 20,000 Hz
• Sound Pressure Level : 96dB @ 1w/1m
• Impedance : 4 Ohms
• Mounting Depth : 9"

Includes:

• (2) Wakeboard Speakers
• Mounting Brackets
• Integrated Grill
• Installation Hardware

Video of RWK10:

The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing.  The resistance per foot of this kit is extremely low compared to any other amp kit in its range.  The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit.  We were more shocked than anyone about these tests, because we used to sell some of those amp kits.  (We now will not sell those any more after learning that they are not up to the quality standards of our installers). The conclusion is that Rockville does a great job manufacturing amp kits while other brands are deceiving consumers.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (1) set of RCA cables.

Features:

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• (1)  17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 10 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3' 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 40 Amp ATU Inline Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Extra long mounting screws to mount Rockville Wakeboard Speakers into Jeep Wrangler rollbars. Includes 8 screws. Works with all Rockville wakeboard speakers.