Package Includes:

• (1) Pair Rockville RMSTS65S 6.5" 800 Watt Waterproof Marine Boat Speakers 2-Way Silver
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
• (1) Pair Rockville RWB90W White 8" 300w Marine Wakeboard 360° Swivel Tower Speakers
  
• (1) Rockville KRYPTON MF4 2400w Peak / 600w RMS 4 Channel Marine Amplifier Boat Amp

---

Video of RMSTS65S:

Description:

The RMST series of marine speakers by Rockville is our step up series that offers a 1" PEI Dome tweeter as well as more power handling! They have a larger magnet and can handle 100 watts RMS & 400 watts peak! If you are using an external amplifier we recommend this series.

These speakers are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!

Rockville engineers care about quality and sound more than anything else. The RMST65 was designed in a molded ABS plastic basket. The polypropylene cone is reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition rubber is a very waterproof material. The 1" PEI Dome tweeter puts out incredible sounding highs. The low end bass and mids of these speakers really makes them stand out.

The RMST65 6.5" marine speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater, freshwater or any other harsh environments. These speakers can withstand tons of abuse and can handle 400 watts peak and 100 watts RMS each. These Rockville speakers comply with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other brands stated higher wattage, the Rockville RMST65 speakers were able to handle more than double the power!)

Using only true marine grade components and materials, the Rockville RMST65 speakers are fully marinized against salt & fresh water conditions. They will not get damaged by fresh water, salt water, or moisture. There is also an additional waterproof and UV resistant coating to completely protect the speakers.

These speakers come with everything you need for installation including pre mounted grills and mounting hardware.

Features:

• Rockville RMST65W 6.5” 2-Way 800 Watt Marine Boat Speakers in White (Pair)
• CEA Compliant Power Ratings
• Power Rating: 400 Watts Peak /100 Watts RMS Per Speaker
• System Power: 800 Watts Combined
• Swivel tweeter allows you to aim the sound where you need
• 6.5“ 2-Way Speaker System
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Waterproof and rustproof
• Stainless Steel Terminals
• Molded ABS plastic basket
• Polypropylene Mica Injected Cone
• Rubber Surround
• High quality ferrite magnet
• 1” inch PEI Dome tweeter
• Oversized 1” CCAW Kapton Voice Coil
• Large Magnet and Motor Structure
• Pre-installed mounting screws included
• Perfect for both marine, outdoor, and car use
• Impedance: 4 Ohms
• Frequency Response: 55Hz - 20KHz
• Sound Pressure Level: 91dB @ 1w/1m
• Total Diameter: 7.56”
• Cutout Diameter: 5.43”
• Total Height: 3.86”
• Mounting Depth: 2.56”

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

---

 

HOW TO RWB SERIES (RWB65B, RWB65W, RWB70B, RWB70W, RWB80B, RWB80W, RWB90W, RWB90B):

 

Video of RWB:

Includes:

• (2) Wakeboard Speakers
• (2) 360° Swivel Mounting Brackets
• Integrated Grill
• Installation Hardware

Description:

• No exaggerated power ratings : These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 200 watts RMS and 300 watts peak. (200 watts RMS is equal to about 500 watts rated by other brands)
• Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
• These can withstand all elements on the water for a lifetime of worry free use
• The mounting screws are longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.
• We’ve added a new and improved nylon mounting bracket. Nylon is strong, light weight, and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360° rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the ability to rotate the speaker to the front or rear of your boat for different applications.
  

Features:

• Pair Rockville RWB90W White 8" 300w Marine Wakeboard 360° Swivel Tower Speakers
• 8" Two-Way High Fidelity Speaker System
• Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
• Includes Stainless Steel Mounting Hardware
• 1" Polymide Dome Neodymium Midrange Tweeter
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Water / Rust Resistant
• Terminals Are Sealed with Rubber Gaskets
• Specially Tuned for PA Voice Over
• Polypropylene Mica Injected Cone with Santoprene Surround
• High BL Magnet Motor Structure
• Y30 High Density Magnets
• Oversized 1.25” Kapton Voice Coil
• Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage.
• These Wakeboards Fit bars ranging from 1.26" 2.87"
• Color: White
• Includes 65mm and 80mm screws that accommodate Jeep Wrangler and any roll ba
• Includes Stainless mounting hardware that wont rust or corrode

Details:

• Power Rating :
• Peak Power Handling : 600 Watts (300 Watts per Speaker)
• RMS Power Handling : 400 Watts (200 Watts per Speaker)
• Frequency Response : 60 – 20,000 Hz
• Sound Pressure Level : 98dB @ 1w/1m
• Impedance : 4 Ohms
• Mounting Depth : 10.5"

---

 

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25’ Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties

---

 

How To Install a Marine Amplifier onto Your Boat:

KRYPTON MF SERIES PRODUCT VIDEO:

What's in the Box:

• Amplifier
  
• PA microphone
  
• Birth sheet with tested power
  
• Owner’s manual
  
• Mounting Screws
  
• Warranty
  

Description of KRYPTON MF4:

We took the sound of our Krypton car amps and we added top of the line marine grade parts so that they will last forever and withstand even the harshest conditions on the water.

We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new!

The KRYPTON MF4 is a class AB 4-Channel high power amplifier with 2,400 watts peak output and 600 watts Dyno certified RMS power. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. In high pass mode we allow you to filter out frequencies between 15Hz - 4K Hz. In full mode you will not be filtering any frequencies. The really cool part is in low pass mode you can use the high pass and low pass mode. So for example you can set the low pass mode to 50 hz, and then you can set the high pass to 15 Hz. In this case you would be playing frequencies in the range of 15-50 Hz on this channel. This would be an example of using the subsonic filter. Another option you have is for midrange speakers, you can use our low pass filter and set it really high. Lets say to 3Khz and then you can set the high pass to 150Hz and your midrange speakers will only play that frequency range. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire.

The KRYPTON MF4 is protected by a fully IC controlled circuit which includes mute, delay and soft start technology so that the amplifier will turn on safely every time and protect your speakers from popping.

You will also notice we decided to add a cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

This is a class A/B amplifier which is what we recommend to get the best sound quality out of full range speakers.

One other cool features about this amp is the marine public address system. Simply plug the microphone into the 3.5mm jack and you are ready to go. The amplifier features talk-over functionality. When the microphone is being used the music will fade to the background until you stop talking into the mic

Features:

• Rockville KRYPTON MF4 2400 Watt Peak and 600w Dyno Certified RMS Class AB 4-Channel Marine Amplifier
  
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  
• 2 Ohm: 150 Watts x 4 Channels <1% THD+N @ 14.4 Volts 
  
• 4 Ohm: 100 Watts x 4 Channels <1% THD+N @ 14.4 Volts 
  
• 4 Ohm Bridged: 300 Watts x 2 Channels <1% THD @ 14.4 Volts 
  
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
• 2 Ohm: 600 Watts x 4 Channels 
  
• 4 Ohm: 400 Watts x 4 Channels
  
• 4 Ohm Bridged: 1200 Watts x 2 Channels 
  
• Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue) 
  
• Rustproof Aluminum heat sink with black hairline finish
• Stainless steel end panels are rustproof
  
• All screws and mounting hardware are stainless steel and rustproof
  
• Bottom panel is aluminum and rustproof
  
• Marine public address system with microphone with talkover function
  
• All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
  
• All channels on the amplifier are bridgeable
  
• Digital Voltage Display on Amp
  
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  
• Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob)
  
• Adjustable Low Pass Filter: 40Hz – 4KHz
  
• Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter)
  
• Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz
  
• 2CH/4CH Input Mode Switch
  
• 8 Volt Preamp Circuitry
  
• Under Voltage Protection at 10V
  
• Over Voltage Protection at 16V 
  
• High-Speed MOSFET Power Supply
  
• Full IC-Controlled Protection Circuitry
  
• Fully Adjustable 12dB Bass Equalizer
  
• Adjustable Input Level Control
  
• Studio-Grade Bipolar Output Stage Transistors 
  
• Mute and Delay Soft Start System                       
  
• Status Mode LED Indicators
  
• Minimum THD at Rated Power: < 0.05%
  
• S / N Ratio: >90dB
  
• Frequency Response: 10Hz - 50KHz
  
• Damping Factor: >85 @ 100Hz
  
• 40 Amp x 2 ATC Fuses
• Color: Black
• Dimensions: (Lx W x H) 16.3? x 8.66? x 2.2?