Package Includes:
- (1) Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound!
- (1) Rockville DBM25 1400 Watt 2 Channel Marine/Boat Amplifier Amp w/Silicone Covers
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
- (1) Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound!
- (1) Rockville DBM25 1400 Watt 2 Channel Marine/Boat Amplifier Amp w/Silicone Covers
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
All About Your RM-PREMIUM-65 SPEAKERS:
How To Set Up Your RM-PREMIUM-65 Speakers:
How To Install Your RM-PREMIUM-65 Into Kick Panel Speaker Pods:
Includes:
- Pair of 6.5" Marine Speakers
- 9.84 feet of Speaker Wire
- Stainless Steel Mounting Screws
Description:
The Rockville RM-PREMIUM 65 marine speakers are our best sounding boat speakers. These have 11 Oz Y35 magnets for extreme power handling. The surface area of the cone on our speaker is significantly larger compared to 6.5" speakers from other brands. Our speaker outputs better low frequencies due to this. For high frequencies we have a 1” PEI dome tweeter with neo magnets. The highs are incredibly crisp and clear. We did many listening tests and our speaker out-performed speakers that are about 4 times the price.
One other important note is that the sensitivity rating of these is amazing so even if you are powering these with a regular receiver they will go super loud and sound great! If you are using an external amplifier then you are also in luck because the power handling is 75w RMS per speaker! This is perfect for amplifiers that can produce anywhere from 15w to 100w RMS per speaker at a 4 ohm load.
This is perfect for use in boats, ATV's, UTV's, and more.
With the RM-PREMIUM 65 you are paying for quality and performance, not for a fancy brand label. This is better and cheaper. You get way more than what you pay for guaranteed.
Features:
- Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound
- Best sounding Rockville marine speakers!
- True Coax Design With the Tweeter Completely Separated From the Cone
- Larger Cone Surface Area Gives Better Mids and Lows
- Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
- True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
- Peak power handling: 600 Watt per pair / 300 Watts per speaker
- RMS power handling: 150 Watt per pair / 75 Watts per speaker
- ABS Water/Weather Resistant Grills
- Fully Marinized Against Salt & Fresh Water Conditions
- Molded ABS basket for amazing sound and protection from the elements while out on the water
- Water and weather resistant Poly Injection Cone
- 11 Oz Y35 top of the line magnet supports high power handling
- Thick Rubber Surround
- High quality ferrite magnet
- 1” PEI Neodymium Dome Tweeter has Clear highs
- Oversized 1” Kapton Voice Coil
- Pre-installed Stainless-Steel mounting screws included
- Perfect for Marine, Car, ATV and UTV applications
- Impedance: 4-Ohm
- Frequency Response: 35Hz - 20KHz
- Sensitivity: 93dB @ 1w/1m
- Total Diameter: 7.17”
- Cutout Diameter: 5.787”
- Total Height: 3.82”
- Mounting Depth: 2.56”
How To Install a Marine Amplifier onto Your Boat:
Video of DBM25:
What's In The Box:
- (1) DBM25 Amplifier
- Birth sheet with Tested Power
- Mounting Screws
- Warranty Card
- Owner’s Manual
Description:
The all new dB marine series of amplifiers gives you the best of both worlds! We took the sound of our best selling series of dB car amps and we added the best marine grade parts so that they will last forever and withstand even the harshest conditions on the water.
We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, all of the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!
The DBM25 is a 2-Channel amplifier with 1,500 watts peak output and 375 watts Dyno Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The DBM25 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.
We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected, we will send you a pre-paid shipping label and give your money back. This means that, if for any reason you want to return the amplifier for a full refund within 90 days, you can! (Amp must be complete along with the box).
Features:
- Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 185 Watts x 2 Channel
- 4 Ohm: 125 Watts x 2 Channel
- 4 Ohm Bridged: 370 Watts x 1 Channel
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm: 750 Watts x 2 Channel
- 4 Ohm: 500 Watts x 2 Channel
- 4 Ohm Bridged: 1500 Watts x 1 Channel
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Adjustable Low Pass Filter: 50Hz - 250Hz
- Adjustable High Pass Filter: 60Hz - 1.2kHz
- Fully Adjustable 12dB Bass Equalizer
- Adjustable Input Level Control
- Minimum THD at Rated Power: <0.05%
- S/N Ratio: >90 dB
- Frequency Response: 10Hz - 50kHz
- Damping Factor: >100 @ 100Hz
- (2) 25 Amp ATC Fuses
- Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
- Waterproof silicone covers for end panels
- Rustproof Aluminum heat sink with white paintedfinish
- Stainless steel end panels are rustproof
- All screws and mounting hardware are stainless steel and rustproof
- Bottom panel is aluminum and rustproof
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Product Dimensions (W x H x L): 9" x 2.4" x 15.1" inches
- Product Weight: 7.7 Lbs
Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25' Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
All About Your RM-PREMIUM-65 SPEAKERS:
How To Set Up Your RM-PREMIUM-65 Speakers:
How To Install Your RM-PREMIUM-65 into kick panel speaker pods:
Includes:
- Pair of 6.5" Marine Speakers
- 9.84 feet of Speaker Wire
- Stainless Steel Mounting Screws
Description:
The Rockville RM-PREMIUM 65 marine speakers are our best sounding boat speakers. These have 11 Oz Y35 magnets for extreme power handling. The surface area of the cone on our speaker is significantly larger compared to 6.5" speakers from other brands. Our speaker outputs better low frequencies due to this. For high frequencies we have a 1” PEI dome tweeter with neo magnets. The highs are incredibly crisp and clear. We did many listening tests and our speaker out-performed speakers that are about 4 times the price.
One other important note is that the sensitivity rating of these is amazing so even if you are powering these with a regular receiver they will go super loud and sound great! If you are using an external amplifier then you are also in luck because the power handling is 75w RMS per speaker! This is perfect for amplifiers that can produce anywhere from 15w to 100w RMS per speaker at a 4 ohm load.
This is perfect for use in boats, ATV's, UTV's, and more.
With the RM-PREMIUM 65 you are paying for quality and performance, not for a fancy brand label. This is better and cheaper. You get way more than what you pay for guaranteed.
Features:
- Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound!
- Best sounding Rockville marine speakers!
- Peak power handling: 600 Watt per pair / 300 Watts per speaker
- RMS power handling: 150 Watt per pair / 75 Watts per speaker
- ABS Water/Weather Resistant Grills
- Fully Marinized Against Salt & Fresh Water Conditions
- Molded ABS basket for amazing sound and protection from the elements while out on the water
- Water and weather resistant Poly Injection Cone
- 11 Oz Y35 top of the line magnet supports high power handling
- Thick Rubber Surround
- High quality ferrite magnet
- 1” PEI Neodymium Dome Tweeter has Clear highs
- Oversized 1” Kapton Voice Coil
- Pre-installed Stainless-Steel mounting screws included
- Perfect for Marine, Car, ATV and UTV applications
- Impedance: 4-Ohm
- Frequency Response: 35Hz - 20KHz
- Sensitivity: 93dB @ 1w/1m
- Total Diameter: 7.17”
- Cutout Diameter: 5.787”
- Total Height: 3.82”
- Mounting Depth: 2.56”
How To Install a Marine Amplifier onto Your Boat:
Video of DBM25:
What's In The Box:
- (1) DBM25 Amplifier
- Birth sheet with Tested Power
- Mounting Screws
- Warranty Card
- Owner’s Manual
Description:
The all new dB marine series of amplifiers gives you the best of both worlds! We took the sound of our best selling series of dB car amps and we added the best marine grade parts so that they will last forever and withstand even the harshest conditions on the water.
We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, all of the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!
The DBM25 is a 2-Channel amplifier with 1,500 watts peak output and 375 watts Dyno Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The DBM25 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.
We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected, we will send you a pre-paid shipping label and give your money back. This means that, if for any reason you want to return the amplifier for a full refund within 90 days, you can! (Amp must be complete along with the box).
Features:
- Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 185 Watts x 2 Channel
- 4 Ohm: 125 Watts x 2 Channel
- 4 Ohm Bridged: 370 Watts x 1 Channel
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm: 750 Watts x 2 Channel
- 4 Ohm: 500 Watts x 2 Channel
- 4 Ohm Bridged: 1500 Watts x 1 Channel
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Adjustable Low Pass Filter: 50Hz - 250Hz
- Adjustable High Pass Filter: 60Hz - 1.2kHz
- Fully Adjustable 12dB Bass Equalizer
- Adjustable Input Level Control
- Minimum THD at Rated Power: <0.05%
- S/N Ratio: >90 dB
- Frequency Response: 10Hz - 50kHz
- Damping Factor: >100 @ 100Hz
- (2) 25 Amp ATC Fuses
- Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
- Waterproof silicone covers for end panels
- Rustproof Aluminum heat sink with white paintedfinish
- Stainless steel end panels are rustproof
- All screws and mounting hardware are stainless steel and rustproof
- Bottom panel is aluminum and rustproof
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Product Dimensions (W x H x L): 9" x 2.4" x 15.1" inches
- Product Weight: 7.7 Lbs
Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25' Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
- UPC:
- 613817139155
