- (1) Pair of Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles
- (1) Pair of Rockville MAC65B 6.5" Black Aluminum Wakeboard Tower Speaker Pod Enclosures
- (1) Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
All About RKL65MBW:
How To Install Kick Panel Speaker Pods In A UTV:
Includes:
- Pair of 6.5" Marine LED Speakers
- 16.4 feet of Speaker Wire
- Stainless Steel Mounting Screws
- Black and White Grills Included
Features:
- Pair Rockville RKL65MBW 6.5" 2-Way 700 Watt Marine Boat Speakers with LED Lights
- CEA Compliant Power Ratings
- True Coax Design With the Tweeter Completely Separated From the Cone
- Larger Cone Surface Area Gives Better Mids and Lows
- Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
- True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
- Power Rating: 350 Watts Peak/85 Watts RMS Per Speaker
- Total Power: 700 Watts
- Beat sync LED's flash to the rhythm of the music
- You can select either red or blue color LED's on the wire harness
- No extra installation for the LED. It gets a power signal through your speaker wire
- The louder the music the more intense the LED's flash
- Black and White detachable Grills
- Fully Marinized Against Salt & Fresh Water Conditions
- UV treated cone makes this completely Waterproof and rustproof
- Anti-corrosion Stainless Steel Terminals
- Molded ABS plastic for amazing sound and protection from the elements while out on the water
- Polypropylene Formed Cone
- 10 Oz Y30 top of the line magnet supports high power handling
- Rubber Surround
- High quality ferrite magnet
- 1" inch Polymer Tweeter
- Oversized 1" CCAW Kapton Voice Coil
- Pre-installed Stainless-Steel mounting screws included
- Perfect for Marine, Car, ATV and UTV applications
- Impedance: 4-Ohm
- Frequency Response: 35Hz - 20KHz
- Sound Pressure Level: 90dB @ 1w/1m
- Total Diameter: 7.3"
- Cutout Diameter: 5.6"
- Total Height: 3.86"
- Mounting Depth: 2.56"
Video of MAC65B:
Includes:
- 2 Wakeboard Cans
- All mounting hardware
- (2) 2.375” rubber inserts
- (2) 2.25” rubber inserts
- (2) 2.5” rubber inserts
- (2) 2” rubber inserts
Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65B comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter. Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!
These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC65B features a black powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!
The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.
Features:
- Pair of Rockville MAC65B black aluminum can wakeboard tower enclosures
- Made of high quality 6061 aircraft grade aluminum
- Beautiful black powder-coat finish
- 100% waterproof and fully marinized against salt and fresh water conditions
- Internally wired for clean install—no exposed wires or terminals
- High efficiency design features the perfect airspace for 6.5” speakers
- Rugged universal mounting clamps made of 6061 aluminum
- Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
- Mounting Depth - 6.7"
- Total Depth - 9.15"
- Cutout - 5.55"
- Diameter - 7.39".
- Mounting diameter - 6.4" (Narrow diameter - 6.12")
- Height of mount - 3.75"
- Total height of unit - 11"
How To Install a Marine Amplifier onto Your Boat:
Video of DBM25:
What's In The Box:
- (1) DBM25 Amplifier
- Birth sheet with Tested Power
- Mounting Screws
- Warranty Card
- Owner’s Manual
Description:
The all new dB marine series of amplifiers gives you the best of both worlds! We took the sound of our best selling series of dB car amps and we added the best marine grade parts so that they will last forever and withstand even the harshest conditions on the water.
We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, all of the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!
The DBM25 is a 2-Channel amplifier with 1,500 watts peak output and 375 watts Dyno Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The DBM25 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.
We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected, we will send you a pre-paid shipping label and give your money back. This means that, if for any reason you want to return the amplifier for a full refund within 90 days, you can! (Amp must be complete along with the box).
Features:
- Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 185 Watts x 2 Channel
- 4 Ohm: 125 Watts x 2 Channel
- 4 Ohm Bridged: 370 Watts x 1 Channel
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm: 750 Watts x 2 Channel
- 4 Ohm: 500 Watts x 2 Channel
- 4 Ohm Bridged: 1500 Watts x 1 Channel
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Adjustable Low Pass Filter: 50 Hz - 250 Hz
- Adjustable High Pass Filter: 60 Hz - 1.2 kHz
- Fully Adjustable 12dB Bass Equalizer
- Adjustable Input Level Control
- Minimum THD at Rated Power: <0.05%
- S/N Ratio: >90 dB
- Frequency Response: 10 Hz - 50 kHz
- Damping Factor: >100 @ 100Hz
- (2) 25 Amp ATC Fuses
- Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
- Waterproof silicone covers for end panels
- Rustproof Aluminum heat sink with white paintedfinish
- Stainless steel end panels are rustproof
- All screws and mounting hardware are stainless steel and rustproof
- Bottom panel is aluminum and rustproof
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Product Dimensions (W x H x L): 9" x 2.4" x 15.1" inches
- Product Weight: 7.7 Lbs
Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25’ Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
- UPC:
- 613816423996
