Package Includes:

• (1) Rockville RCS80-1 60 Watt 70v Commercial/Restaurant Amplifier/Bluetooth Receiver
  
• (2) JBL COL600-BK 24" Black 70V Commercial Slim Column Wall Mount Array Speaker
  

---

Video of RCS80-1:

Includes of RCS80-1:

• Amplifier
• Remote
• Rack mount ears
• Power Cable
• FM Radio antenna
• Owner's manual
• Warranty

Description of RCS80-1 :

Rockville is proud to introduce the first commercial amplifier in our new RCS series of products. The RCS80-1 is a 60 Watt single zone rack mountable digital hybrid amplifier/receiver. This amplifier is capable of 70 volt, 100 volt, 8 ohm, and 4 ohm applications.

This makes it perfect for use in a Restaurant/Bar/Café/Lounge/School/Conference room or any other setting where multiple speakers are needed. With the dual mic inputs you can use this amplifier for announcements, speeches or even for Karaoke night! The RCS80-1 features Bluetooth audio streaming so you can play your favorite music or access a playlist right from your phone!

This amp also features both USB and SD inputs allowing you to play audio stored on a USB thumb drive or SD Card. Individual volume knobs for two microphones, MP3, and line inputs allow for full and autonomous control of this amplifier. The built in cooling system in this amplifier will keep the components cool making the amplifier durable and reliable.

Our goal with the RCS series was to make it possible for anyone to install 70 volt systems on their own without spending thousands of dollars on a contractor. This model makes it a breeze to connect any audio device such as a cd player, mp3 player, television etc.

What Is 70 Volt Technology?

70 volt systems are the number one choice for any application where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, with this 60 watt / 70 volt amplifier, you can install speakers that total around 50 watts. It does not matter if it is 10 speakers that are 5 watts each or 20 speakers that are tapped at 2.5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the selectors that many speakers in 70 volt have on them. For example, some speakers might have selectable options of 1.5w, 3w, 5w, 10w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. What this allows for is full customization of your sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 10 watts, the ones in the hallway at 3 watts and the speakers in the bathrooms at 1.5 watts.

Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc.

70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads.

The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.

If you want an easy to use feature-rich 70 volt amplifier the Rockville RCS80-1 is your best choice!

Applications:

• Restaurant
• Bar
• Café
• School
• Conference Room
• Lounge

Features:

• Rockville RCS80-1 60 Watt Commercial/Restaurant Amplifier 19" Rack-Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver
• Capable of 70 volt, 100 volt, 16 ohm, 8ohm, and 4 ohm
• 70/100 volt True RMS Power: 60 Watts
• 4 ohm RMS power: 80 Watts
• 8 ohm RMS power: 70 Watts
• 16 ohm RMS power: 11 Watts
• Built in Bluetooth audio streaming
• FM radio tuner
• USB input to play audio stored on a thumb drive (32gb max)
• SD card slot to play music stored on an SD Card (32gb max)
• Separate volume control for MIC1, MIC2, MP3, LINE1, LINE 2 input
• Bass and Treble control
• 5 segments signal level indication
• Built in cooling system keeps component cool at all times

Inputs and Outputs:

• (2) Sets RCA AUX inputs
• (2) Mic inputs
• RCA REC output
• 100V speaker red positive speaker output terminal
• 70V speaker red positive speaker output terminal
• 8 Ohm red positive speaker output terminal
• Shared negative speaker output terminal

Specifications:

• Distortion: <0.5% (1kHz)
• Signal to Noise Ratio: > 79dB
• Power Requirements: 120V / 50-60Hz
• A Weighted Signal to Noise (@ 1W) -79.0dBA
• A Weighted Signal to Noise (referenced to full 4 ohm power) -95.1dBA
• Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 8 Ohms <10Hz - 22.8kHz
• Frequency Response vs THD+N (worst case, across normal bandwidth 1W @ 8 ohms) 0.82%
• Weight: 10.03 lbs
• Dimensions: 16.9" x 9.45" x 2.76" inches

---

Description of JBL COL600-BK: 

The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor.

A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.

Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall.

A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech.

Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall).

The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals.

Features:

• Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter
  
• 24 inch tall with shallow 3.7 inch cabinet depth
  
• Wide 160° horizontal and focused 110° vertical coverage
  
• 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet
  
• 80W continuous pink noise power handling (320W peak)
  
• 70 Hz – 20 kHz frequency range
  
• Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input.
  
• 111 dB peak SPL (105 dB continuous), 2 hrs
  
• Tweeter near top of column for unobstructed coverage of listening space
  
• Versatile mounting brackets included – both

Common Applications:

The JBL COL600 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.

Specifications:

• Frequency Range (-10 dB)¹: 70 Hz – 20 kHz
  
• Frequency Response (+/-3 dB): 105 Hz – 20 kHz
  
• Power Rating (8Ω setting)2: 
  
• 160W Continuous Program (2 hrs)
  
• 80W (320W peak) Continuous Pink Noise (2 hrs)
  
• 60W (240W peak) Continuous Pink Noise (100 hrs)
  
• Sensitivity (2.83V @ 1m): 86 dB
• Color: Black

Coverage Pattern:

• Vertical 110° [1kHz-4 kHz average]
  
• 10° down-tilt to aiming access for+25°/-45° coverage in relation to physical cabinet aim
  
• Horizontal 160° [1kHz – 4 kHz average]
  
• Directivity (Q): 7.8
  
• Directivity Index (DI): 8.9 dB
  
• Rated Maximum SPL: 105 dB Continuous (111 dB peak) @ 1m
  
• Nominal Impedance: 8Ω (in Thru/direct mode)
  
• Minimum Impedance: 7.0 Ω@ 275 Hz
  
• Transformer Taps: 20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8Ω thru, selectable via switch
  
• Transformer Insertion Loss: Less than 1 dB for all taps
  
• Maximum Input Voltage: 21 V RMS (2 hrs), 42 V peak
  
• Recommended Protective High-Pass: 70 Hz for 8 Ω operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W)
  

Drivers:

• Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers
  
• One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space)
  
• Enclosure Material: PC + ABS, UL94-V0 flammability rating
  
• Grille: Plated SPCC with polyester powder coat finish
  
• Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE.
  
• Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006]
  
• Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in)
  

Insert Points:

• Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.]
  
• Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.]
  

Mounting:

• Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers.
  
• Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points.
  
• Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method.
  
• Dimensions (H x W x D): 598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches)
  
• Net Weight: 3.5 kg (7.8 lbs) each
  
• Shipping Weight: 4.5 kg (10.0 lbs) each (packed 1 speaker per carton)
  

Included Accessories:

• Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points.