Package Includes:
- (1) Rockville RCS650-6 650 Watt 6 Zone 70v Commercial/Restaurant Amplifier/Bluetooth
- (3) JBL AWC129-BK 12" Black 2-Way Indoor/Outdoor Surface Mount Commercial Speaker
- (1) Wiim Pro+ Plus Wifi Streaming Player Audiophile HD Hi-Res Sound 24 Bit 192Khz
All About Your RCS650-6:
How To Set Up Your RCS Series of Amplifiers:
How To Parallel Wire Your 70 VOLT System:
What's In The Box:
- Amplifier
- Remote
- Rack Mount Ears
- Power Cable
- FM Radio Antenna
- Set-up and how-to training video so you can install it yourself
- Warranty
Description:
Rockville is proud to introduce our new RCS series of products. The RCS650-6 is a 650 Watt 6-zone rack mountable digital hybrid amplifier/receiver. This amplifier is capable of 70 volt, 100 volt, 8-ohm, and 4-ohm applications. This makes it perfect for use in a Restaurant/Bar/Café/Lounge/School/Conference room or any other setting where many speakers are needed.
This RCS650-6 outputs 650 watts at 70 volt or 780 Watts at 100 volt and the power can be split up into 6 zones. (Most professionals recommend you not exceed 90% of the amp power, so we recommend your speakers watts not to be more than 600 in total on the taps). Each zone can output up to 200 watts and all zones should not exceed 650 watts. If you want all 650 watts into a single zone you can use the direct outputs. If you want to use multiple zones then you can use the zone outputs. For example you can have zone 1 with 200 watts, zone 2 with 200 watts, zone 3 with 100 watts, zone 4 with 50 watts, zone 6 with 50 watts. This would total 600 watts which is less than the 650 watts the amp can produce and its also not more than the 200 watts output each zone can produce.
Wiring is totally simple as well. You just wire all the speakers in parallel from one to the next. This product will include a video URL in the box to train you how to use it.
With 3 mic inputs; each with echo control, you can use this amplifier for announcements, speeches or even Karaoke night! This model also includes a chime button so you can create a chime sound before making announcements. The RCS series features Bluetooth audio streaming so you can play your favorite music or access a playlist right from your phone! This amp also features both USB and SD inputs allowing you to play audio stored on a USB thumb drive or SD Card. There are also 2-line inputs that allow you to plug in another audio device such as an MP3 player, CD player, TV, etc.
Individual volume knobs for each of the 6 zones and volume knobs for each of the 3 mic inputs gives you full control over your system. If you want a volume control in each room, then you can buy any of our wall mount 70 volt volume controllers such as our VOL70100.
The built-in clipping limiter function protects your speakers and the amp from overheating. For further protection there is also a cooling system in this amplifier that will keep the components running cool making the amplifier durable and reliable.
Our goal with the RCS series was to make it possible for anyone to install 70 volt systems on their own without spending thousands of dollars on a contractor. The RCS650-6 makes it a breeze to connect many speakers and multiple external sources. We intentionally use common plugs like RCA and ¼" to make this amplifier more universal and user friendly. With our unique design you can feel confident in your DIY ability when installing our commercial system!
What is 70 volt ?
70 volt systems are the number one choice for any application where you want to install multiple speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, with this 650 watt / 70 volt amplifier, you can install speakers that total around 600 watts. It does not matter if it is 18 speakers that are 30 watts each or 36 speakers that are tapped at 15 watts each. You always want your 70 volt amp to have at least 10% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the selectors that many speakers in 70 volt have on them. For example, some speakers might have selectable options of 1.5w, 3w, 5w, 10w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. What this allows for is full customization of your sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 10 watts, the ones in the hallway at 3 watts and the speakers in the bathrooms at 1.5 watts. Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc.
70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads. The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
If you want an easy to use feature-rich 70 volt amplifier with a ton of power and 6 zones the Rockville RCS650-6 is your best choice!
Applications:
- Restaurant
- Bar
- Café
- School
- Lounge
- Home (Multi-zone, Multi-room)
- Office
- Warehouse
Features:
- Rockville RCS650-6 650 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
- Capable of 70 volt, 100 volt, 8 ohm, and 4 ohm
- 70V RMS Power: 650 Watts
- 100 volt RMS Power: 780 Watts
- 6-Zones - each zone has a separate volume control and you can easily add wall volume controllers as well
- Each zone can output 200 watts at 70 volts and the entire amp can output 650 watts total RMS
- You can use the direct output and get 650 watts to a single zone or you can use the zone outputs and get up to 200 watts per zone with all zones combined not exceeding 650 watts
- Built in Bluetooth audio streaming
- FM radio tuner
- USB input to play audio stored on a thumb drive (32gb max)
- SD card slot to play music stored on an SD Card (32gb max)
- Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3
- Echo control for the mic inputs with speed and repeat adjustments
- Built in clipping limiter to protect the amp and speakers
- BASS and Treble control
- Chime button for making announcements
- Top quality aluminum panel with industrial grade knobs
- 5 segments signal level indication
- Built in cooling system keeps component cool at all times
Inputs and Outputs:
- (2) Sets RCA AUX inputs
- (3) Mic inputs
- RCA Line output
- 100V speaker red positive speaker output terminal
- 70V speaker red positive speaker output terminal
- 8 Ohm red positive speaker output terminal
- Shared negative speaker output terminal
Specifications:
- Power Requirements: 120V / 50-60Hz
- A Weighted Signal to Noise (@ 1W) -70.2dBA
- A Weighted Signal to Noise (referenced to full 4 ohm power) -93.9dBA
- Frequency Response: 42Hz to 20 Khz
- Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.65%
- Weight: 31.7 lbs
- Dimensions: 19" x 16" x 4" inches
All about your 70 Volt:
Description:
All-Weather Compact 2-Way Coaxial Loudspeaker with 12" LF
The AWC129 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types.
Features:
- Highly weather-resistant IP56 rating
- Consistent 90° x 90° broadband pattern control
- Components:
- 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil.
- 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection
- 55 Hz – 20 kHz frequency response.
- 200 Watt 70V/100V multi-tap (built-in transformer) direct 8O low-impedance.
Specifications:
- Frequency Range (-10dB): 55 Hz – 20 kHz
- Frequency Response (±3 dB): 80 Hz – 20 kHz
- Coverage Pattern: 90° x 90°
- Directivity Factor (Q): 10.1 (1 k – 16 kHz)
- Directivity Index (DI): 9.5 dB (1k – 16 kHz)
- System Power Rating: 400 W (1600 W peak), 2 hrs. 250 W (1000 W peak), 100 hrs
- Sensitivity (2.83V @ 1m): 96 dB (Ave. 80 Hz – 20 kHz)
- Maximum SPL (1m): Direct 8O: 122 dB (peaks of 128 dB) 200 W Tap: 119 dB
- Crossover Network: 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
- Nominal Impedance: 8 ohms
- Transformer Taps: 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W
- LF Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.
- HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
- HF Driver Protection: Minimum audibility SonicGuard™ HF overload protection
- Enclosure: ABS with Glass enclosure, heavily braced
- Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
- Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing.
- Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
- Environmental: IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
- Dimensions: 402 x 402 x 445mm (15.8 x 15.8 x 17.5 in), cabinet 470 mm (18.5 in) depth with gland nut 542 mm (21.4 in) including bracket extending to back
- Colors: Available in gray (similar to Pantone 420C) and black (-BK)
- Net Weight (each): 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with u-bracket
- Shipping Weight: 23.4 kg (51.5 lbs)
- Included Accessories: U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.
- Crossover Modes: Passive
- Nominal LF Driver Impedance: 8 ohms
- Suspension Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
All About Your WIIM PRO PLUS:
How To Set Up Your WIIM PRO PLUS:
Inputs, Outputs, Controls, and Functions on Your WIIM PRO PLUS Explained:
How To Set Up a Multi-Room Audio Set Up With Your WIIM PRO PLUS:
What's in the box:
Description:
Turn any audio gear smart
WiiM Pro Plus is an audiophile-grade music streamer with AirPlay 2, Chromecast, DLNA, Spotify Connect, TIDAL Connect, Alexa Cast and multiroom audio. WiiM Pro Plus turns your existing stereo system into smart, so you can play all your favorite music from your music service App, the WiiM App, or your voice using Alexa, Google Voice, or Siri all in the highest possible sound fidelity.
Stream Hi-Res audio up to 192 kHz/24 bit
WiiM Pro supports up to 192kHz, 24-bit audio output. That's the same as an artist's recording in the studio. The integrated TI stereo DAC provides high-quality analog audio output with 106-dB SNR, dynamic range, and -92dB THD+N performance.
All your content in one app
We support many popular music streaming services in our WiiM Home app with more to come. Or connect to your NAS or local files to stream your favorite music. Spotify, Qobuz, TuneIn, Pandora, Deezer, vTuner, Amazon Music, SoundCloud, TIDAL, iHeartRadio, Radio Paradise, Amazon Alexa, Calm Radio, Napster, SoundMachine, Roon
Play music everywhere with multi-room audio
Easily build your multiroom sound system with your existing AirPlay 2 speakers, Amazon Echo, and Google Home devices. Using your legacy audio devices, you can create a more flexible multiroom sound system with multiple WiiM Pros, WiiM Minis, or Linkplay-powered devices. WiiM Pro supports multiroom from various audio source inputs, including WiFi, BT, Aux, and SPDIF input, making it versatile with almost every music listening option.
Multiple EQ options
Cater to your listening taste by applying multiple EQ options including the 26 preset EQs, bass/treble adjustment, 10-band graphic EQ and parametric EQ.
Automate your routines
Make your life easier by automating your routines. For your sleeping and wake-up routines, create a routine to wake up or fall asleep to your favorite music, station, or podcasts. Or, use your Alexa to create routines.
Works with Siri, Alexa, and Google voice Assistants
Use your favorite voice assistants to select music, control playback volume, and more.
High-Res audio
Offering more streaming services and audio content that incorporate MP3 quality, lossless audio, or immersive sound technologies for their listeners. WiiM devices provide the capability to play Hi-Res lossless audio contents from Spotify, Amazon Music, TIDAL, Deezer, Qobuz and more. It supports up to 192kHz, 24-bit audio output which is the same as artist's recording in the studio . The integrated TI stereo DAC provides the high quality analog audio output with the 106-dB SNR, dynamic range and -92dB THD+N performance, outstanding in all audio categories.
Multiroom and stereo pairing
Playing music in your whole house is achieved with the perfect audio synchronization and seamless device control via the companion App . With careful hardware, algorithm and software optimization, we can achieve less than 150uS (0.00015s) synchronization accuracy among speakers as long as the speakers are in the same wireless network. Thus, your speaker system can be located wherever your Wi-Fi network covers. In addition, you can join two speakers connected with WiiM Pro or Mini as a stereo pair for a wider, more immersive sound stage. It also supports multi-room and for the various audio inputs such as Wi-Fi based streaming music, BT and analog/digital audio input via Line In or optical in. Thus, it can work with most of your music listening options.
Gapless Playback
Precise gapless playback is important to your listening experience. With precise gapless playback, the playback timing is guaranteed to be identical to the source. It's not allowed to introduce gaps or overlaps (crossfading) between successive tracks. The gap will be very noticeable in " continous " music such as live concert recording, some classical music etc. Various software, firmware and hardware components may add up to a substantial delay associated with starting playback of track. Our player uses two decoders to remove the extra samples at the beginning and end of each file, and combine them. It works for all the supported music services and music in your phone or local network
Adaptive EQ
Breakthrough listening experience requires both high-res audio contents and high quality playback device . When adaptive EQ is enabled, the music genre information and other tags included in the audio content are used to adjust the frequency in real time -either bringing rich audio to capture every music detail or making human voices clearer in the podcast.
Auto calibration of audio delay
The connected receiver or speaker may have different audio path latency due to different hardware, software and DSP processing. To maintain the synchronization of each system, it's desirable to measure the audio path delay automatically. By leveraging the on-device microphone and proprietary algorithm, the entire audio path latency is measured automatically when it's connected with the receiver or speaker. The latency value will be used to maintain the perfect audio synchronization in wireless multi-room playback with HomePod, Echo, Google Home or other WiiM devices.
Features:
- Ethernet: Y
- DAC IC: AKM 4493SEQ
- Analog Out SNR: 121dB
- THD+N (Analog Out): -113dB (0.00023%)
- Analog Input (ADC): Up to 192k, 24bit
- Chromecast Audio: Y
- Group with Nest speakers and Display: Y
- Group with Echo speakers and Display: Y
- Alexa Multiroom with UHD: Y
- Group with HomePods: Y
- Works with Alexa: Y
- Works with Google: Y
- Works with Siri: Y
- Group with WiiM or Linkplay devices: Y
- AirPlay 2: Y
- AirPlay Cast: Y
- DLNA: Y
- Spotify Connect: Y
- TIDAL Connect: Y
- Gapless Playback: Y
- 10-band Graphics EQ: Y
- Linkplay Music Streaming Platform: Y
- CPU: Quadcore A53
- DRAM: 512 MB
- Flash: 512 MB
- Audio Input Port: Line-in, Optical
- Audio Output Port: Line-Out, Optical, Coax
- MP3: High Quality - 320 Kbps
- CD(HI-FI): Lossless Quality - 1411 Kbps
- HI-RES: High-Res Quality - 2304-9216 Kbps
Specifications:
- Dimensions and Weight: 5.5" x 5.5" x 1.6"
- Wiim Pro Plus Weight：400g (14.1 oz)
- Audio Input: 1 x Analog RCA Line input, 2 Vrms, 192 kHz/24-bit, SNR 106dB, 1 x SPDIF in Optical, up to 192kHz/24-bit
- Analog Audio Output: 1 x Analog RCA Line output, 1 x Digital optical (SPDIF) output, 1 x Digital Coaxial output, up to 768kHz/32-bit, DSD512
- Internal DAC IC: AKM4493SEQ
- SNR (built-in DAC): 120dB
- THD+N (built-in DAC): 0.00032% (-110dB)
- Network: 802.11 b/g/n/ac 2.4 GHz and 5 GHz dual bands Wi-Fi
- Bluetooth: Bluetooth 5.1
- Digital Audio Output: Bit-perfect output, up to 192 kHz, 24-bit with digital optical or coaxial output.
- Audio Codec: MP3, AAC, ALAC, APE, FLAC, WAV, WMA, OGG
- Protocol: AirPlay 2, Chromecast Audio, DLNA, Spotify Connect, TIDAL Connect, Amazon Music Casting, Qplay 2.0, Roon
- Streaming Services in App: Spotify, Amazon Music, Deezer, Tunein, Tidal, Qobuz, SoundCloud, Pandora, iHeartRadio, vTuner, Napster, Sound machine, etc.
- Power Input: USB Type-C, requires 5V, 1.5A or higher, Bundled adapter: 5V, 2A
- LED: Three color status LED — Red, Green and White
- Button: Capacitive touch buttons – Play/Pause, Volume +, Volume -, 1 x Preset
- Accessory: WiiM Voice Remote, Premium RCA Cable for Line Out
- UPC:
- 613817136918
