How to Setup your Podcast - Microphones, Interfaces, and Equipment (Rockville University Ep 1.) :
Package Includes:
- (1) Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Samson MD2 Weighted Adjustable Desktop Mic Stand for Recording, Studio, Podcast
How to Set Up a Podcast in Under 60 Seconds :
All About Your RCM02:
Description:
The Rockville RCM02 condenser microphone performs better than famous branded microphones that cost over $125. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We highly recommend this design. We also upgraded this model to a high end metal anti wind cap! This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM02 amazing in studio applications.
The aluminum construction makes the RCM02 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM02 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
- 10 foot 100% Copper XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -29dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: Within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 380 Grams (0.84 Pounds)
- Microphone Max.diameter: 51mm (2" inches)
- Microphone Length: 215mm (8.46" inches)
- Microphone Material: Steel grille + Aluminum (handheld part)
- PCB Layout: Surface Mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Authorized Samson Dealer!
Description:
The Samson MD2 Desktop Microphone Stand is the ideal mic accessory for any desktop studio. Via a telescoping arm, the MD2 is easily adjustable from 6–8” in height to allow for optimal, as well as versatile, desktop mic positioning. While it’s low-profile design fits unobtrusively on desktops, the MD2 offers a weighted die-cast metal base (4” width) to ensure stability to any microphone with a standard mic clip (5/8”-27 threading). It’s perfect for podcasts, voiceovers, recording music or any other desktop application where ideal mic placement is essential
Features:
- Samson MD2 Weighted Adjustable Desktop Mic Stand for Recording, Studio, or Podcast
- 6–8” Telescoping Desktop Microphone Stand
- Weighted Die-Cast Metal Base (4” Width) for Stable Positioning
- 5/8”- 27 Mic Clip Threading
- Compatible With Any Standard Microphone/Mic Clip
- Product Dimensions (H x W x D): 5" x 4" x 2" inches
- Product W eight: 1.4 Lbs.
- UPC:
- 613815779117
