Package Includes:
- (1) Rockford Fosgate R1-2X10 Dual 10" 800W Loaded Subwoofers+Sub Enclosure
- (1) Kicker 43CXA3001 300 Watt RMS Mono Class D Car Stereo Amplifier
- (1) Rockville RWK81 8 Gauge Complete Wire Kit with RCA Cables
Features of R1-2X10:
- Rockford Fosgate R1-2X10 2-Ohm Dual 10" Subwoofer Loaded in a Sealed Box
- (2) Prime R1S4-10 10" Woofers
- Peak Power: 800 Watts Total
- RMS Power: 400 Watts Total
- Nominal Impedance: 2-Ohm
- Butyl surround
- Integrated trim ring
- Stamped steel basket
- Sealed Configuration
- CEA-2031 Compliant
- Klippel Program Certified
- Constructed with 5/8" MDF
- Covered with high density carpet
- High current binding posts
- Wired internally to create a 2-Ohm amplifier load
- Sealed Configuration
- Up to 12 AWG compression terminals
- CEA-2031 Compliant
- Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
- Dimensions: H 12.2" x W 30.12" x D 12.11" (31cm x 76.5cm x 30.8cm)
Description of 43cxA3001:
The CXA 300.1 Mono Amplifier is a small, yet powerful and affordable amp. Using a Class D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump. A powerful 12dB crossover is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system. This CXA amplifier delivers 300 Watts RMS at 2 Ohms. This amp reaches massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look.
Features:
- Kicker 43CXA3001 CXA300.1 300 Watt RMS Mono Class D Car Amplifier
- RMS Power Rating:
.....4 ohms: 150 watts x 1 chan.
.....2 ohms: 300 watts x 1 chan. - Peak power output: 600 watts
- Pulse Width Modulated MOSFET power supply
- Kicker CXARC wired remote bass level control available and sold separately
- LED power (green) and protect (red) indicators
- Soft start turn-on
- Mono channel operation
- Speaker-level (high-level) inputs via RCA (Requires Kicker KISL, available and sold separately)
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- 8-gauge power and ground leads and a 40-amp fuse recommended (Not include in this amplifier)
- Input sensitivity: Low level: 125mV-5V ; High level: 250mV-10V
- Frequency Response: 25 - 200Hz
- Signal to Noise Ration: >95dB
- Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
- Fixed Subsonic Filter @ 25hz, 24db/octave
Video of RWK81:
Description:
The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4.
The Rockville amplifier installation kits feature a new soft abrasion
proof insulating jacket. This rugged PVC outer jacket allows for 100%
improved flexibility over standard power cables making them extremely
easy to route through your vehicles interior, and it maintains
exceptional resistance to grease and oil. The PVC outer jacket can
with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings
product experts have tested this amp kit against many leading amp kits
on the market and were were impressed not only by the great looks but by
the quality of these Rockville installation kits as well. These kits
had a lower resistance rating than the other brands we compared and
tested them against. What this means is that Rockville manufactures
their kits with more copper than other kits at this price point,
ultimately providing your amplifiers with better and cleaner DC power,
so they work cooler and more efficiently. You will hear the difference a
Rockville installation kit will make!
One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (1) sets of RCA cables.
Features:
- Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
- (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable
- 17 8 Gauge Translucent Blue SuperFlex Power Cables
- 17 18 Gauge Blue Remote Cable
- 17 16 Gauge Clear Speaker Wire
- 3 8 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7 Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Soft abrasion proof insulating jacket allows for 100% improved flexibility
- PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
- UPC:
- 613815629399
