- (1) Rockville R-TRACK 2x2 USB Computer Recording Interface 24 Bit 192Khz 2 Mic-Pres
- (1) Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville R-BOOM 34 34" Easy-Adjust Boom Arm Studio Podcast Mic Stand+Desk Clamp
All About Your R-TRACK 2x2:
How To Set Up Your R-TRACK 2X2:
Setting Up a Two Person Podcast with the R-TRACK 2x2:
What's In The Box:
- R-TRACK 2x2
- User Manual
- USB Cable, Type A to Type B
- Power Adapter
Description:
The R-TRACK 2x2 is a full function USB recording interface equipped with 2 high quality mic preamps, MIDI capabilities and ultra-low latency performance.
This unit has all the features you need to quickly capture high-resolution audio, along with some bonus features. The R-TRACK 2x2 records 24 bit / 192Khz ultra-high resolution audio. This interface has an ASIO-licensed driver which means you get the best performance and flawless compatibility with your favorite DAW (the interface will be recognized in any recording software that you use).
Channel 1 and channel 2 will be addressed as separate independent tracks by your DAW, allowing you to edit each channel independently or sum it together. Both channels have 48V phantom power with 25db PAD attenuation allowing you to easily integrate condenser microphones in your setup. The Hi/Lo-Z impedance selector allows you to connect instruments such as guitars and bass to the interface without the use of an additional DI box.
The MIDI input and output make it easy to connect keyboards and other MIDI devices. We also include a mono/stereo switch which is a great feature that allows you to monitor your mix in mono or stereo, which is critical when mixing. You don't need any additional plugins or complex routing configurations to see how your mixes translate in mono : simply activate the switch and hear the results immediately.
Each input channel has combo jacks that can accept microphones (condenser or dynamic), instruments, and almost any other audio device you can think of.
The build quality of this interface is really great. It's made out of aluminum with steel reinforcements on the sides. The knobs are sturdy and linear, with a great feel. You will fall in love with the build quality when you pick this up. More importantly, you will fall in love with the sound quality and features when you record your first track with the R-Track.
If you are experienced with recording interfaces, you will feel comfortable with this instantly because it has all the latest features like other famous interfaces. If you are new to recording, then you are in luck because we will include helpful how-to videos and download links so you can get started on your recording journey. Our help content is the best in the industry because we train you how to use this item in a way that is easy to understand even if you have 0 experience.
With the R-TRACK 2x2 you get one of the best quality interfaces along with the most helpful content so you will get the most out of this product.
Features:
- Rockville R-TRACK 2x2 USB Computer Recording Interface with 2 Mic Pre's
- 24 Bit 192Khz high sampling rate
- Licensed ASIO recording interface works perfectly with all the popular recording software's
- Built in USB interface will send CH1and CH2 separately to your favorite DAW
- Interface will be identified and addressed as an external sound card in your DAW
- (CH1) Combo jack (XLR and ¼") Mic/Line input with gain control, -25dB PAD attenuation, and 48V Phantom power
- (CH2) Combo jack (XLR and ¼") Mic/Line input with gain control, Lo-Z / Hi-Z impedance selector, and 48V Phantom power
- BUS powered through USB or use the included adapter to power it
- USB 2.0 port: Type B connector
- Left and Right 1/4" Stereo outputs
- Left and Right XLR output jacks
- ¼" Headphones output
- MIDI input/output
- Gain control knob (CH1-2)
- -25db PAD attenuation on (CH1-2)
- Direct/DAW Monitoring blend knob
- Main volume knob
- Headphones volume knob
- Mono/stereo output switch
- Signal LED indicator on (CH1-2)
- Peak LED indicator detects clipping at the input stage on channel (CH1-2)
- Power LED indicator
- MIDI LED indicator
- K lock (Kensington Security Lock)
- Super linear mic preamp with low noise (You will love the sound quality)
- The interface is made of sturdy aluminum alloy and steel metal. This is built tough!
- All knobs and potentiometers are sturdy and linear
- The knobs are made with a rubbery grip that feels amazing
- USB chip made by XMOS
- Ultra-low latency
Detailed Specifications:
- Mic: 3mV/3KO (Gain max)
- Line, channel 1/2: 15mV/10KO (Gain max)
- Hi-z, channel 2: 15mV/1MO
- MAIN Output Level: 4.8V (15dBu) max
- PHONES Output Level: 775mV (0dBu) max
- Frequency Range: 20 -20000Hz ±1dBu
- S/N Ratio: 90 dBu(A-weighted)
- THD+N: <0.002%(A-weighted )
- Dynamic Range: 106 dBu(A-weighted )
- Gain Range: 50 dBu
- Headphone Impedance: =32O
- USB Interface: USB 2.0 full speed and earlier (also 1.1 compatible)
- Supported Sampling Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz
- Bit Depth: 16bit, 24bit
- Dimensions: 210*137*48mm
- Weight: 0.85Kg
- Suitable operating system for data transfer via USB interface
- Windows XP or higher; Mac OS 9.0.4 or higher, 10.X or higher
All About Your RCM02:
Description:
The Rockville RCM02 condenser microphone performs better than famous branded microphones that cost over $125. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We highly recommend this design. We also upgraded this model to a high end metal anti wind cap! This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM02 amazing in studio applications.
The aluminum construction makes the RCM02 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM02 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
- 10 foot 100% Copper XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -29dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: Within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 380 Grams (0.84 Pounds)
- Microphone Max.diameter: 51mm (2" inches)
- Microphone Length: 215mm (8.46" inches)
- Microphone Material: Steel grille + Aluminum (handheld part)
- PCB Layout: Surface Mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
All About Your R-BOOM 34:
How To Set Up Your R-BOOM 34:
How To Set Up A Dynamic / Condenser Microphone With Your R-BOOM 34:
How To Attach A Smartphone or Tablet To The R-BOOM 34:
What's In The Box:
- (1) Microphone Stand
- (1) C-clamp base
- (4) Cable ties
- 5/8" to 3/8" adapter to accommodate mics, webcams, and more
- (1) Mic clip
- (1) Warranty Card & Owner's Manual
Features:
- Rockville R-BOOM 34 34" Easy-Adjust Boom Arm Studio Podcast Mic Stand + Desk Clamp
- Desk-Mounted Broadcast/Podcast/Studio Microphone Boom Stand
- Real time adjustments during a podcast or stream without the need to loosen and tighten knobs
- Pro version has no exposed springs
- Strong and sturdy ABS C-clamp
- Clamp has extra sturdy and grippy rubber pads that will not scratch your desk
- Multiple adjustment points to suit any angle
- Total length: 34" including the clamp
- Weight: 1.98 lbs.
- Clamps to any desk, table, or surface less than 2.4 inches thick
- Black Powder-Coated Steel Construction
- Free adjustable position - simply move the stand and it stays
- Includes ABS mic clip
- Max weight: 0 to 4.4 lbs.
- Rotates 360 degrees
- Articulates in 3 areas (When articulating the arm, you can feel it click into place)
- Sturdy suspension with internal teeth locking mechanism combined with spring mechanism
- No shaking or unwanted vibrations
- Compatible with mics that have either 5/8" or 3/8"
- UPC:
- 613825733895
