Package Includes:
- (1) Pair of Alpine R-S69.2 300 Watt 6x9" Car Audio Coaxial 2-Way Speakers
- (1) Pair of Alpine R-S65.2 300 Watt 6.5" Car Audio Coaxial 2-Way Speakers
- (1) Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit w/RCA's
Description of R-S69.2:
Experience pure Hi-Resolution audio with the all-new R-Series. These audiophile-grade speakers are engineered with patented materials and signifi cant advances that substantially increases sonic performance beyond their predecessors and nearest rival. The result is incredible clarity and linearity across the extended high-resolution bandwidth right into the 45kHz.
Experience your music with remarkable power and authenticity—R-Series delivers Hi-Resolution sound like no other.
EXPERIENCE HI-RES AUDIO WITH R-SERIES
What is Hi-Res Audio?
You can now appreciate a higher sampling rate than in CD’s for the encoding and
playback of music, it brings your favourite tracks to life with extreme clarity.
Alpine’s painstaking engineering has delivered faithful audio reproduction from
high resolution sound sources and recordings at 96kHz/24Bit or greater, they are
optimised for high definition playback and breathtaking performance.
Why Hi-Res Audio?
Listening to Hi Resolution Audio allows you to feel every emotion and hear every
nuance; every detail of your favourite artist’s original studio performance is
reproduced to perfection. Hi-Res Audio provides absolutely no distortion for the
ultimate listening experience.?
Square Wire Extra-Large Voice Coil
The R-Series speakers boasts an extra-large 35mm voice coil diameter and
precision engineered neodymium magnetic structure. This achieves extraordinary
control of the cone movement for incredible linearity and powerful bass.
Carbon Fiber Technology
Carbon Fiber Reinforced Polymer (CFRP) is an all-new Alpine patented material
utilised in the R-Series woofer cone and tweeter. CFRP is extremely light
weight, yet high strength which takes clarity and dynamics to unprecedented
levels.
Exclusive HAMR Surround
Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum
and linear cone excursion for high SPL. The HAMR surround maintains full control
over the cone at any excursion stage for powerful bass and pure sound.
Extended Dynamic Range for Hi-Res Audio
R-Series speakers are engineered to achieve an incredible extended dynamic range
and Hi-Res Audio certification. With upper harmonics played right up to 45kHz
you can experience sound like never before, faithful to the original recording.
Features:
Tweeter
- Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter
- Voice Coil Type: Dual Gap for optimum linearity and clarity
- Magnet Material: Neodymium Magnet
- Swivel Application allowing the sound to be focused for the best in-car sound performance
Woofer
- Cone Material: Hybrid Multi Layer Cone
- Motor Technology: Linear Drive Technology
- Surround: HAMR Surround
- Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity
- Magnet: Ultra High Density Neodymium Magnet
- DX Ring: DX Ring
- Wave Guide: Wave Guide
- Mounting: Shallow Mounting Design
- Mounting Adapters: Mounting Adapter Kit Included
- Design: Bi-Amp Ready Design
Specifications:
General
- Peak Power Handling: 300W per speaker
- RMS Power Handling: 100W per speaker
- Nominal Impedance: 4ohms
- Frequency Response: 60Hz-40kHz
- In-Line High Quality Crossover
- 59mm Mounting Depth
- Swivel Tweeters
- Neodymium Magnet
- Multi-layer Hybrid Cone
- Dual Gap Voice Coil
- All-New Design Circuit for Precision Response
Dimensions
- Woofer Diameter (mm): 160mm x 240mm
- Woofer Diameter (in): 6? x 9?
- Woofer Mounting Diameter (mm): 167mm
- Woofer Mounting Diameter (in): 6-19/32?
- Woofer Mounting Depth (mm): 75mm
- Woofer Mounting Depth (in): 3?
- Woofer Cutout Dimensions: 5-7/8" x 8-7/8"
Description of R-S65.2:
With the R-Series speakers' innovative material that delivers more output, the speakers produce dependable performance for a loud and fun experience.
TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY
If you play your music loud and want others to know, the R-Series speakers are
the match for you. You’ll enjoy a center sound stage with speakers that play
loud and clear without distortion. The R-Series speakers are tuned with emphasis
on the high- and low-end frequencies, so they deliver power while naturally
producing bright, active sound. They are the perfect power and performance match
for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil which allows for more
coil windings to fit in the gap. This results in greater heat dissipation and
increased power handling, for superior control and output.
The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and reduced footprint, which contributes to easier installation.
EXCLUSIVE CONE TECHNOLOGY
The R-Series speakers use Alpine’s exclusive cone technology, Carbon Fiber
Reinforced Polymer (CFRP), which is a high-strength, lightweight material. CFRP
can be custom-formed so that its fibers align in the same direction as the curve
and shape of the cone, thereby reducing resonant peaks and increasing the
speakers’ mid-bass performance and dynamic range. CFRP is also used as a tweeter
diaphragm, enabling the speakers to perform into the 45kHz range and making them
compliant with High-Resolution Audio playback.
BETTER FITMENT WITHOUT SACRIFICING MOTOR FORCE
The R-Series speakers use a neodymium magnet which gives them a shorter overall
height, compared to other speaker brands. The R-Series speakers also use a new,
shallower grill design. The result: An improved fitment design that lets the
R-Series speakers fit into tighter install locations without sacrificing motor
force.
Specification:
- 6.5” 2-Way Speakers
- CTA-2031: 100W RMS per speaker/300W Peak Power per speaker
- Nominal Impedance: 4-ohm
- Frequency Response: 65Hz-40kHz
- 1” CFRP Dome Tweeter
- CFRP Cone
- H.A.M.R. Surround
- 35mm Voice Coil
- Hi-Res Audio Compatible
- Sensitivity: 88 dB SPL (1W@1m)
- Top mount depth: 2-3/8"
Description of RXA-F1:
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXA-F1 is a 4 channel high power amplifier with 1600w peak. 380 Watts (4 x 95 Watts @ 2 ohms). You can also bridge the amplifier and get 2 x 200 Watts bridged @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXA-F1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.
One last point I want to make about this amplifier is efficiency. The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).
Features:
- Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 260 Watts (4 x 65 Watts) at 4 ohms and 1% THD+N
- 380 Watts (4 x 95 Watts) at 2 ohms < 1% THD
- 2 x 200 Watts bridged @ 4 Ohms < 1% THD
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):
- 1600 Watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 Ohms)
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Fully Adjustable 12dB Bass Equalizer
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- 3 Channel Mixed-Mono Capable
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- 2 CH / 4 CH Input Mode Switch
- RCA Preamp Line Output
- ELNA Brand Audiophile Capacitors
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD: < 0.05%
- Frequency Response: 10Hz - 40KHz
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- CH3 & CH4 Low Pass 50Hz - 3KHz
- CH3 & CH4 High Pass 15Hz - 1KHz
- CH1 & CH2 High Pass 50Hz - 300Hz, 500Hz - 3Khz (x10)
- Sensitivity: 100dB @ 1w / 1m
- Damping Factor: > 200 @ 100Hz
- 60 Amp Maxi Fuse
- Dimensions: (W x H x L) 8.5" x 1.8" x 13"
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- UPC:
- 613816269556
