- (1) Peavey PV6 PV 6 Pro Audio Mixer with 2 Mic In, USB, Compressor and Effects
- (2) SAMSON Q8x Pro Handheld Vocal Microphone+Mic Clip+Carry Bag 4 DJ/Church/Karaoke
- (2) Rockville DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp
- (2) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) SAMSON QH4 4-Channel Headphone Amplifier Distribution Amp
- (2) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
How to Setup Your Podcast:
How to Set Up a Podcast in Under 60 Seconds :
#1 Authorized Peavey Internet Retailer!
Description of PV 6 New:
The
PV® 6 compact Peavey mixer offers durable construction and excellent sound quality at an unbelievably low price. Made of metal, not plastic,
the PV 6 is built tough and designed for either live sound or recording. Its reference quality mic pre-amps are super quiet with less than
0.0007% of total harmonic distortion. Each of the four channels includes XLR and 1/4" inputs, phantom power, EQ and effects send. The master
section offers assignable tape input and a master contour EQ which simultaneously cuts mids while slightly boosting the bass and treble in
the overall mix. Outputs include L & R for main and control room, effects send and headphones.
Features:
- Peavey PV6 PV 6 Pro Audio Mixer with 2 Mic In, USB, Compressor and Effects
- Channels 3 and 5 with stereo line inputs
- 3-band EQ on channels 1-2
- LED clip, signal
- 1 effects send with stereo output
- 1 stereo effects returns
- Control room output
- Global 48 volt phantom power, tape to control room and tape to mix assignments
- Stereo Output 1/4 inch balanced connectors
- Rugged console design
- Reaper Software included
- 4 RQ™ (reference-quality) low noise microphone inputs
- Weight Unpacked: 5.30 lb(2.404 kg)
- Weight Packed: 7.00 lb(3.175 kg)
- Width Packed: 4.25"(10.795 cm)
- Height Packed: 15.25"(38.735 cm)
- Depth Packed: 10.25"(26.035 cm)
Description of SAQ8X:
Samson’s flagship Q8x Professional Dynamic Vocal Microphone provides the ultimate in sound reproduction for live and studio vocal and instrument performances. This high output microphone faithfully captures a wide dynamic range with exceptional mid-range clarity. Its supercardioid pickup pattern provides maximum gain before feedback, while an updated body design and pneumatic capsule shock mount minimize handling noise.
Why So Superior?
The Q8x’s superior reproduction stems from the linear frequency response of
its neodymium dynamic microphone element. The response is flat with a slight
lift around 8kHz. This makes fitting vocals in live mixes extremely easy with
minimal EQ adjustments. The microphone also features a supercardioid pickup
pattern with excellent off-axis rejection. This enables the Q8x to pick up all
the nuances of any performance with maximum volume and clarity, while reducing
feedback and unwanted signals not originating in front of the microphone. In
addition, a high saturation level audio transformer further rejects hum and
noise.
Not Just for Vocals
The Q8x is not just a great live vocal microphone. It’s an extremely
versatile tool in the studio, perfect for numerous recording applications. As
the Q8x is equipped to withstand high sound pressure levels up to 150dB SPL, it
allows vocals to sound huge and crystal clear, but can also handle close micing
instruments such as piercing snare drums, screaming guitar cabinets and much
more
New and Improved
With a newly-designed rugged die-cast body and hardened steel grille, along
with an improved pneumatic capsule shockmount for minimizing handling noise, the
Q8x provides reliable performance in even the most demanding environments
Many Applications
Great for live and studio vocal performances, acoustic guitar and cabinet
micing, drums and instrument micing, presentations, podcasting, and more!
Features:
- SAMSON Q8x Pro Handheld Vocal Microphone + Mic Clip + Carry Bag
- Element Type: Neodymium dynamic
- Polar Pattern: Supercardioid
- Audio Transformer: High saturation level, silicon steel alloyed w/ nickel-iron-molybdenum
- Frequency Response: 50Hz–16kHz
- Sensitivity: -54dBV/pa (2.5mV/Pa)
- Rated Impedance: 300O
- Max. SPL: 150dB
- Connector: 3-pin gold-plated balanced XLR male
- Body Construction/Grille: Die-cast/hardened steel
- Accessories: Microphone clip, zipper pouch
- Product Dimensions: 7.09" x 2.13" diameter(180mm x 54mm diameter)
- Product Weight: 0.97lb (0.44kg)
- Gift Box Dimensions: 8.5” x 4” x 2.5” (218mm x 100mm x 66mm)
- Gift Box Weight: 1.43lb (0.65kg)
How to Set Up DMS40:
Video of DMS40:
The Rockville DMS40 desktop microphone boom arm is the perfect accessory for any podcast, home studio setup, or broadcasting studio. Its rotating design provides a maximum arm reach of 40" giving you freedom to place your mic anywhere you want!
Our designers used the most sturdy and long lasting clamps and springs, with durable steel construction.
Features:
- Rockville DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm
- Articulating microphone boom arm
- Suitable for studios, broadcasting, podcasting, and more
- Arms: 20"+20" arm length for adjustment
- C-shape desk clamp is made of aluminum alloy
- Fits any desk less than 2 inch thick
- ABS plastic mic clip
- You can set the base of the stand on the desk firmly and adjust to your favorite position
- High quality steel frame is sturdy and durable
- Internal springs for silent and effortless positioning
About Rockville Quality Control Procedures:
The
Rockville brand stands for Quality, Innovation and Value. All Rockville
products go through the most rigorous quality control standards in the
industry. Products go through months of extensive testing before they
reach your hands. All user functions are tested and all internal
components are tested for quality. Rockville makes products that are
virtually un-breakable! Rockville is one of the only brands in its class
to test every concept model for weeks or months before starting
production. Once production begins, Rockville sends product engineers to
their factory to quality control every line of production. During
production every product is tested and on top of that Rockville goes the
extra mile and has their high level product engineers do an additional
quality control. They test a certain percentage of all products from the
production line a second time to ensure that the quality meets their
vigorous standards, and to make sure that there is never a batch of
products with even a slight problem. All Rockville products are backed
with a hassle free warranty, though it is unlikely that you will need to
use it.
Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
Video of SAQH4 :
Description :
Channel Your Sound.
You've positioned your microphones, set your levels and everyone's ready to record. Now, you need a way for each performer to hear themselves. That's where the Samson QH4 comes in... The QH4 is a 4-channel headphone amplifier designed to distribute your audio to up to four individual headphones, each with its own volume control. Its compact design is perfect for use with any studio or desktop workstation, as well as with your laptop or smartphone when you're recording on the go.
In Side... And Out
The QH4 features two balanced 1/4" inputs to connect with your mixer or recording interface, as well as a stereo 1/8" Aux input that's perfect for playing music via your smartphone or another line level device. In addition to the four stereo 1/4" headphone outputs, the QH4 provides a 1/8" Aux Out that can be used to daisy chain mutilple QH4s together.
The four independent high-power amplifier channels deliver clean, crisp audio to up to four sets of headphones, operating between 16–600O. And power does not diminish even when all four channels are being used. Engineered with an ultra-low noise floor and wide dynamic range, the QH4 is a tremendous value compared to other headphone amplifiers on the market. Also, the QH4's Master volume control and Mute switch make controlling the overall level of your headphones a breeze.
Check Your Phase
Before bouncing your mix, you should always check to ensure that it's compatible with mono speaker systems. The QH4 features a global Mono button, which allows you to quickly check the mono compatibility of your tracks. If you notice that some of your audio is missing, you should check the phase of your recordings. This feature also allows you to take a split left and right feed from a stereo interview and send both tracks to each side of your headphones. This is great for quickly monitoring a podcast or recording with split tracks.
Whether you're tracking multiple performers in a studio, recording a podcast, watching a video with friends or just kicking back listening to some tunes, the QH4 provides great sound at an amazing value.
Features:
- SAMSON QH4 4-Channel Stereo DJ Studio Monitoring Headphone Amplifier Amp
- 4-channel stereo headphone distribution amplifier
- Four independent 1/4" stereo headphone channels
- Individual volume control on each headphone channel
- Two balanced 1/4" input connectors
- Stereo 1/8" Aux input and output
- Master Mute and Mono-summing switches
Specifications:
- Inputs: 2 x 1/4" balanced, stereo 1/8" unbalanced TRS
- Outputs: 4 x stereo 1/4" unbalanced, stereo 1/8" unbalanced TRS
- Controls: Master volume, master Mute, master Mono, 4 x Channel volume
- Noise Floor: -114dBu, 22k BW unweighted
- Maximum Output: 8.3 dBu, 1% THD+N, loaded 16R
- Dynamic Range: 22dB, 22k BW
- Frequency Response: 17Hz–47kHz (-3dB)
- Power: 15VDC adapter
Video of RCXFM20E-B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 20 Ft
- Color: Black
- UPC:
- 613815872924
