Package Includes:
- (1) Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Condenser Overhead Microphones
- (1) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad
- (1) Rockville LINE8 8 Channel Line/Mic Mixer/Stereo/Mono/Battery Operated or Adapter
- (1) Rockville RVMIC4 v2 Round-Base Pro Mic Stand w/ Metal Quick-Release Hand Clutch
- (1) Samson Stand Mount Dual Mics Microphone Adapter For (2) Microphones
- (5) Rockville RCXFB25BL 25' Female REAN XLR to 1/4'' TRS Cable Blue 100% Copper
- (1) Rockville RCXFB25O 25' Female XLR to 1/4'' TRS Cable Orange, 100% Copper
- (1) Rockville RCXFB25Y 25' Female XLR to 1/4'' TRS Cable Yellow, 100% Copper
- (1) Mackie MP-120 Single Dynamic Driver Professional In-Ear Monitors + Carry Case
- (1) Rockville RDS30 Deluxe Thick Padded Foldable Drum Throne Stool Adjustable Height
HOW To Set Up Your PRO-D7 KIT:
What’s Included:
- (1) Bass drum mic
- (4) Snare drum mics
- (2) Overhead condenser mics
- (7) Mic clips
- (1) Aluminum travel/protective case with foam
- Manual
- Warranty card
Features of PRO-D7 KIT:
Steel grill
Snare Drum Microphone:
- Steel grill
- Aluminum body
- Zinc alloy hardware
- Fits any mic stands
- Anti-wind filter inside the grill
- Element: Dynamic
- Polar Pattern: Cardioid
- Large diaphragm delivers accurate frequency response
- Frequency response is engineered to be perfect for tom-toms and snare drums
- Studio quality performance make these perfect for recording or live shows
- Sounds great even at high SPL levels
- Rejection of unwanted noises
- XLR Output
- Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
- Frequency Response: 60Hz-13KHz
- Sensitivity: -54dB±3dB (0dB=1V/Pa at 1KHz)
- Output Impendence: 600O ±30% (at 1kHz)
- Microphone Length: 4.53 inches
- Microphone Max. Diameter: 1.61 inches
- Microphone Weight: 0.44 Lbs
Overhead Condenser Microphones:
- Overhead cardioid condenser microphone
- Steel grill
- Aluminum body
- Anti-wind filter inside the grill
- Element: condenser
- 16 MM large diameter cartridge has amazing sound
- Polar Pattern: Cardioid
- Large diaphragm delivers accurate frequency response
- Frequency response is extremely flat and engineered to be perfect for cymbals and other drums
- Studio quality performance make these perfect for recording or live shows
- Sounds great even at high SPL levels
- Rejection of unwanted noises
- XLR Output
- Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
- Low mass diaphragm
- Frequency Response: 70Hz-20KHz
- Sensitivity: 13mV/Pa
- Output Impendence: 2000 Ohms (at 1kHz)
- Max SPL: 127dB(at 1kHz=1% T.H.D)
- S/N ratio: 96dB
- Power Supply: Phantom 48V or DC1.5V
- Microphone Length: 8.46 inches
- Microphone Max. Diameter: 1.06 inches
- Microphone Weight: 0.22 Lbs
Features for Case:
- Aluminum case holds all the microphones and mounts
- Protective foam makes sure your mics stay in perfect condition when you travel
- Carry handle makes it easy to carry the case from gig to gig
- High quality case with good looking design
- Buckle latch secures the case closed
- Protective foam is molded for each microphone and clip
- Dimensions of case: 19.1” x 13.4” x 3.94” inches
How To Set Up Your RKDS:
Videos of RKDS:
Description:
The RKDS is a multi-purpose mini mic stand. The most popular use of these are for kick drum mic stands, but there are so many other amazing uses for these. They really come in handy for any amp or instrument that has to be on the ground. You can use these to mic up a bass drum, kick drum, snare, guitar amp, or bass amp. (Certain bass players prefer to have a mic). These are also perfect for floor stage mics, as a desk mic, or for use on the dais table at parties and corporate events. Additional uses are for a stand-up bass, or for saxophone players (sitting). There is so many ways these little stands come in handy.
Our stand weighs twice as much as others on the market because these are super-sturdy and solid. The RKDS has a 10.2” Steel Round Base with a rubber pad that eliminates unwanted noises. It has a 21.4" fixed boom arm that provides precise positioning for your mic.
The stand adjusts from 18.7” to 28.7”. This bad-boy Weighs in at 6.6lbs. There is no better stand in its class at this price guaranteed!
And we topped it off with a scratch-resistant powder coated finish so the stand looks beautiful for life!
This uses a standard thread size of 5/8”inch.
Features:
- Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom and Rubber Pad
- Low profile height adjustable microphone stand for kick drums and guitar amps
- Heavy-duty steel round base with rubber pad provide extreme stability
- Fixed boom arm provides precise positioning
- Scratch-resistant powder coated finish
Specifications:
- Booming length : 21.4" (54.5cm)
- Height adjustment : 18.7"- 28.7" (47.5cm – 73cm)
- Base Diameter : 10.2" (26cm)
- Thread Size : 5/8"
- Weight : 6.6 lbs (3 kgs)
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
What's In The Box:
- (1) Rockville LINE8 Mixer
- (1) Power Adapter
- Owner's Manual
- Warranty Card
Two modes of operation:
- Stereo mode: Inputs A1 through A4 are routed to output A and inputs B1 through B4 are routed to output B. Each are mic/line selectable.
- Mono mode: All 8 inputs are sent to output A and B
Features:
- Rockville LINE8 8-Channel Line and Microphone Stereo/Mono Mixer with Battery Operated or Power Adapter
- 8 Mono or 4 Stereo Channels (Stereo or Mono Selectable Switch)
- Selectable Line or Mic Input on inputs A1-A4 and selectable mic/line level inputs on channels B1-B4
- Peak indicator lights
- Power LED indicator
- Dual Power Supply: Power Adapter (Included) or 9V battery (Not Included)
- Ultra Low-Noise – Perfect Sound Quality Even at Max Volume
- 8 Inputs with individual volume controls (1/4" Balanced TRS)
- 2 Outputs (1/4” Balanced TRS)
- 2 Master Knobs for Adjusting the Output Volume on Each Channel
- Power switch on back of unit
- Compact, Portable Size
- Strong Aluminum Housing
- Product Dimensions: 5.9" x 4.3" x 2.6" inches
- Product Weight: 1.3 Lbs
All About Your RVMIC4 V2:
How To Set Up Your RVMIC4 V2:
How To Set Up RVMIC4 V2 with Smartphone/Tablet Holder:
How To Set Up RVMIC4 V2 with IsoBox:
How To Set Up Your RVMIC4 V2 with a Dynamic Microphone:
How To Set Up Your RVMIC4 V2 with a Boom Arm:
How To Set Up Your RVMIC4 V2 with a Condenser Microphone:
Description:
New V2 with all-metal hand-clutch system!
This Rockville RVMIC4 v2 mic stand has an all-metal clutch system that allows you to instantly raise or lower the stand with one hand. It is the most convenient way to adjust a mic stand!
Our 1 inch diameter thick steel tubing is unmatched in strength and durability by most other brands!
The joints we use are made of aluminum. Most our competitors use plastic joints and mechanisms which will not last as long as metal.
We use a very heavy duty round base that’s got some serious weight to it! This makes the stand very sturdy. We also put thick form underneath the base to protect your floor. The diameter of the base is 9.84” inches. The total weight of this heavy-duty stand weighs in at 8.8 lbs.
For added convenience we added wire clips that allow you to route the wire cleanly.
Features:
- Rockville RVMIC4 V2 Professional Round-Base Microphone Stand With Metal Quick Release Hand Clutch
- New V2 model with full metal hand-clutch mechanism!
- Weighted metal round base makes the stand extremely stable
- Thick foam padding underneath the base protects your floor
- One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)
- Adjustable Height Range without the mic clip: 38-61 inches
- Aluminum leg joints
- This mic stand is the easiest and quickest to adjust on the market!
- The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube. This is about 50 % thicker than almost all other brands on the market making this one of the sturdiest stands in the world
- 100% steel construction and Aluminum joints! NO Plastic parts!
- Standard 3/8” threading with 5/8” adapter
- Includes mic clip
- Cable guiding clip on the stand for running cables
- Black Color
- Top Tube Diameter: 0.75" inch
- Lower Tube Diameter: 1" inches
- Round base with a diameter of 9.84” inches
- No complicated assembly required, simply turn and screw the stand into the base
- This rock solid stand weighs in at 9.2 LBS!
Authorized Samson Dealer!
Description of SADMA2:
Mic In Stereo.
The Samson DMA2 Dual Microphone Adapter is the ideal accessory for utilizing
stereo mic'ing techniques when recording, especially for orchestras, choirs and
various other live and studio situations. The predominantly steel-constructed
DMA2 can be connected to the top of any standard mic stand thanks to 5/8"-27
threading. From there, the adapter can hold two separate microphones via mic
clips or boom arms with its 3/8" locking screws. These two screws can be
adjusted to provide not only 360° of individual mic rotation, but also 2"–7"
separation between the two mics. This allows you to find the appropriate mic
placement for your particular recording application.
Features:
- SAMSON Stand Mount Dual Mics Microphone Adapter For (2) Microphones
- Dual microphone adapter ideal for stereo mic'ing techniques
- Holds two mics (via mic clips or boom arms) with 3/8" locking screws
- Adjustable screws offer 360° mic rotation and 2"–7" of mic separation for optimal placement
- Connects to the top of any standard mic stand
- 5/8"-27 mic stand threading
- Steel construction
Advantages of buying from an authorized seller:
- Best prices - We sell all Samson Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Samson product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Samson from an un-authorized seller then you are taking a big risk. You will not have any manufacturer warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Video of RCXFB25BL:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step furth
- UPC:
- 613817189730
