- (1) Rockford Fosgate Punch PM600X4 600 Watt Marine Boat 4-Channel Amplifier
- (1) Pair of Kicker 41KM604W 6-1/2" 6.5" KM-Series Speakers Totaling 150W Peak/50W RMS
- (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Authorized Rockford Fosgate Dealer!
Description of PM600X4:
The PM600X4 is a 600 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.
The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
Features :
- Rockford Fosgate Punch PM600X4 600 Watt Marine Boat 4-Channel Amplifier
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
- CEA-2006 Compliant
- Number of Channels : 4
- Power Handling :
- RMS Power Handling : 75 Watts x 4 @ 4-Ohm
- : 150 Watts x 4 @ 2-Ohm
- : 300 Watts x 2 @ 4-Ohm Bridged
- Total Rated Power : 600 Watts
- Dynamic Power (PVC/PowerCube®) : 129 Watts x 4 @ 4-Ohms 0° Res
- : 211 Watts x 4 @ 2-Ohms 0° Res
- Bridgeable : Yes
- Frequency Response : 20Hz to 20kHz +/- 1.0dB
- Efficiency (average) : 68% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise) : 4-Ohm : <1.0%
- : 2-Ohm : <1.0%
- Crossover Controls : Front/Rear High-Pass (HP) : 50Hz-250Hz @ 12dB/octave Butterworth
- Front/Rear Low-Pass (HP) : 50Hz-250Hz 12dB/octave Butterworth
- All-Pass : Yes
- Tone Controls : Front Punch EQ2 Bass : 0dB to +18dB @ 45Hz and/or
- Front Punch EQ2 Treble : 0dB to +12.5dB @ 12kHz
- Rear Punch EQ2 Bass : 0dB to +18dB @ 45Hz and/or
- Rear Punch EQ2 Treble : 0dB to +12.5dB @ 12kHz
- Function depends upon LP/AP/HP switch position
- Input Sensitivity : 150 mV - 12 V
- Signal Input : Hi/Low level : 2 RCA pair
- Signal Output : Low level : 1 RCA pair
- Power Input Connector : Captive C-Clamp
Audiosavings can only ship Kicker products to the United States. Sorry, but we cannot ship Kicker to Canada or United Kingdom.
Description of 41KM604W:
Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry. We are so confident that you will be happy with your Kicker purchase from us that we will offer you the following guarantee. We GUARANTEE you will be more than satisfied with the sound and value of any Kicker products purchased from us. We urge you to buy this product; test it; and if it doesn't meet your standards; send it back to us within 90 Days and we ll give you a 100% FULL REFUND (or store credit). We ll even give you a return shipping label to ship it back to us!!!
There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.
Kicker 41KM604W designed for the simplest of speaker installations, it is a breeze to get live-quality, full-range audio designed specifically for a marine environment.
KICKER Marine Coaxials meet or exceed industry standards for environmental humidity and corrosion* and for material degradation due to UV exposure. ** UV treatments on the coaxials injection-molded cones, Santoprene® surrounds, baskets and grilles help all models to maintain in marine environments, These speakers can endure most any weather conditions with splash- and spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel. The coaxials come packaged with ample wiring for running the length of a large vessel to the power amplifier.
The KM604 is the only speaker pair that is completely white, available in 4-Ohm and with ½-inch tweeters.
Features:
- Pair of Kicker 41KM604W 6.5" 4-Ohm 2-Way Coaxial Marine Speakers
- Power Handling Per Speaker: 150 Watts Peak/50 Watts RMS
- Power Handling Per Pair: 300 Watts Peak/100 Watts RMS
- 2-Way Design
- Santoprene® surrounds
- Woofer Size: 6.5"
- Woofer Composition Polypropylene
- Tweeter Size: 1/2"
- Tweeter Dome Material: PEI (Polyetherimide)
- Impedance: 4-Ohms
- Sensitivity: 90dB
- Frequency Response: 35-21,000 Hz
- Cutout Dimensions: 5.18"
- Top-Mount Depth: 2.5"
- Grilles: White Only
Video of RMWK:
Features:
- Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned Oxygen Free 100% Copper Flexible PVC RCA Cable
- 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to Better Resist Chemicals in the Battery Compartment
- 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge Tinned Oxygen Free 100% Copper, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1 Silver Mini-AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1 50A Mini-AGU Fuse
- 2 Rust Resistant Ring Terminals
- 2 Rust Resistant Spade Terminals
- 5 Rust Resistant Speaker Cable Terminals
- 1 Rust Resistant Washer
- 10 White Cable Ties
Owner's manual
- UPC:
- 613816005765
