Package Includes:
- (1) Rockford Fosgate PM300X2 300 Watt RMS 2 Channel Marine/Boat Amplifier
- (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Description of PM300X2:
The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
Features:
- Rockford Fosgate PM300X2 300 Watt RMS 2 Channel Marine/Boat Amplifier Punch Amp
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating 100W x 2 @ 4Ω ≤1.0% THD+N
- Number of Channels: 2
- Rated Power (RMS Continuous Power):
- 100 Watts x 2 @ 4-Ohm
- 150 Watts x 2 @ 2-Ohm
- 300 Watts x 1 @ 4-Ohm Bridged
- Total Power (Sum of Rated Power): 300 Watts
- Dynamic Power (PVC/PowerCube):
- 120 Watts x 2 @ 4-Ohms 0° Res
- 203 Watts x 2 @ 2-Ohms 0° Res
- Bridgeable: Yes
- Frequency Response: 20Hz-20kHz
- Efficiency (average): 69% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0%
- Crossover Controls:
- High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
- Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
- All-Pass: Yes
- Tone Controls: 0dB to +14dB @ 12.5kHz ; 0dB to +18dB @ 45Hz
- Input Sensitivity: 150 mV - 12 V
- Signal Input: Hi/Low Level: 1 RCA Pair
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 8 AWG to 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Die Cast Aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED
- Input Clip LED
- Output Clip LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 50 A
- Max. Current Draw (13.8V Sinewave): 45 A
- Average Current Draw (13.8V Music): 23 A
- Suggested Alternator: 75 A
- Shipping Weight: 9.5 lbs. (4.3 Kg.)
- Dimensions (H x W x D): 2.38" x 7.76" x 9.86" (6.05 x 19.71 x 25.04 cm)
Video of RMWK:
Features:
- Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned Oxygen Free 100% Copper Flexible PVC RCA Cable
- 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to Better Resist Chemicals in the Battery Compartment
- 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge Tinned Oxygen Free 100% Copper, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1 Silver Mini-AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1 50A Mini-AGU Fuse
- 2 Rust Resistant Ring Terminals
- 2 Rust Resistant Spade Terminals
- 5 Rust Resistant Speaker Cable Terminals
- 1 Rust Resistant Washer
- 10 White Cable Ties
Owner's manual
1 YEAR
- UPC:
- 613815949480