Package Includes:

• (1) Rockford Fosgate PM300X1 300 Watt RMS Monoblock Marine/Boat Amplifier
• (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit

---

Description of PM300X1:

The PM300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.

Features:

• Rockford Fosgate PM300X1 300 Watt RMS Monoblock Marine/Boat Amplifier Punch Amp
  
• High level input capable with Auto Turn-On circuit
  
• RCA pass-thru outputs
  
• Features C.L.E.A.N. Set-up
  
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  
• 12dB/octave Butterworth crossover
  
• On-board Punch EQ with +18dB boost @ 45Hz.
  
• Muted turn on
  
• Stealth top mounted control panel
  
• Cast aluminum heatsink
  
• Short circuit protection
  
• Over current protection
  
• Marine grade two part epoxy coating on circuit boards
  
• Marine grade stainless steel hardware

Specifications:

• CEA-2006 Compliant: 200W x 1 @ 4Ω ≤1.0% THD+N
  
• Number of Channels: 1
  
• Rated Power (RMS Continuous Power):   
• 200 Watts x 1 @ 4-Ohm
  
• 300 Watts x 1 @ 2-Ohm
  
• Total Power (Sum of Rated Power): 300 Watts
  
• Dynamic Power (PVC/PowerCube): 
  
• 260 Watts x 1 @ 4-Ohms 0° Res
  
• 444 Watts x 1 @ 2-Ohms 0° Res
  
• Bridgeable: No
  
• Frequency Response: 20Hz to 20kHz +/- 1.0dB
  
• Efficiency (average): 74% @ 4-Ohm
  
• Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%; 2-Ohm: <1.0%
  
• Crossover Controls:     
• High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
  
• Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
  
• All-Pass: Yes
  
• Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
  
• Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
  
• Function depends upon LP/AP/HP switch position
  
• Input Sensitivity: 150 mV - 12 V
  
• Signal Input: Hi/Low level: 1 RCA pair
  
• Signal Output: Low Level: 1 RCA Pair
  
• Power Input Connector: Captive C-Clamp
  
• Power Wire Gauge: 8 AWG to 4 AWG
  
• Speaker Output Connector: Captive C-Clamp
  
• Speaker Wire Gauge: 8 AWG to 18 AWG
  
• Heat Sink Type: Cast aluminum
  
• Cooling: Convection
  
• Remote Controls: Optional Punch Level Control (PLC2) Ready
  
• Visual Indicators: Power/Protect/Thermal LED
  
• Input Clip LED
  
• Output Clip LED
  
• Circuit Topology Class: Class-A/B
  
• Operating Voltage: 9 - 16 VDC
  
• Recommended Fuse (not included): 50 A
  
• Max. Current Draw (13.8V Sinewave): 45 A
  
• Average Current Draw (13.8V Music): 23 A
  
• Suggested Alternator: 75 A
  
• Shipping Weight: 9.5 lbs. (4.30 Kg.)
  
• Dimensions (H x W x D): 2.38" x 7.76" x 9.86" (6.05 x 19.71 x 25.04 cm)
  

---

 

Video of RMWK:

Features:

• Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 25’ Translucent, Twisted Pair, High Quality, Tinned Oxygen Free 100% Copper Flexible PVC RCA Cable
• 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to Better Resist Chemicals in the Battery Compartment
• 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge Tinned Oxygen Free 100% Copper, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 20’ Blue Remote Wire
• 1 Silver Mini-AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• 1 50A Mini-AGU Fuse
• 2 Rust Resistant Ring Terminals
• 2 Rust Resistant Spade Terminals
• 5 Rust Resistant Speaker Cable Terminals
• 1 Rust Resistant Washer
• 10 White Cable Ties

Owner's manual